[PD-dev] build error
Hans-Christoph Steiner
hans at eds.org
Sat Apr 12 22:24:37 CEST 2008
Hey all,
I think I fixed this. I replaced 'echo' with 'printf' and removed
the test for 'echo'. We'll find out tomorrow if it truly works. Or
if anyone feels like running a build on their machine.
.hc
On Apr 12, 2008, at 3:24 PM, marius schebella wrote:
> hello (hans),
> what does this line do?
> ifeq ($(shell echo -e|sed 's|^-||'),e)
> in order to get autobuilds working you have to make sure that echo
> gets called as /sw/bin/echo on 10.5 in the Makefile for toxy.
> marius.
>
> marius schebella wrote:
>> looks goooood!
>> created: /Users/marius/devel/pd-rsync/pd-extended/packages/
>> darwin_app/Pd-0.40.3-extended-20080411.dmg rm -f build.dmg
>> hdiutil unflatten "Pd-0.40.3-extended-20080411.dmg"
>> hdiutil: unflatten: unflattening "Pd-0.40.3-extended-20080411.dmg"...
>> /Developer/Tools/Rez /Developer/Headers/FlatCarbon/*.r SLA.r -a \
>> -o "Pd-0.40.3-extended-20080411.dmg"
>> hdiutil flatten "Pd-0.40.3-extended-20080411.dmg"
>> hdiutil: flatten: flattening "Pd-0.40.3-extended-20080411.dmg"...
>> upload specs darwin_app . dmg
>> Uploading /Users/marius/devel/pd-rsync/pd-extended/packages/
>> darwin_app/./Pd*.dmg
>> @ERROR: access denied to upload from
>> cpe-66-65-50-166.nyc.res.rr.com (66.65.50.166)
>> rsync: connection unexpectedly closed (0 bytes received so far)
>> [sender]
>> rsync error: error in rsync protocol data stream (code 12) at /
>> SourceCache/rsync/rsync-30/rsync/io.c(359)
>> marius.
>> marius schebella wrote:
>>> ok, the problem is that the following lines do not work on 10.5:
>>>
>>> # this is necessary to deal with cross-platform echo issues with
>>> '-e'
>>> ifeq ($(shell echo -e|sed 's|^-||'),e)
>>> ECHO = /bin/echo
>>> else
>>> ECHO = echo
>>> endif
>>>
>>> or maybe they work, but somehow this still calls /bin/echo, even
>>> if I uncomment the whole thing and hardcode it to "echo" some
>>> lines down,
>>> Makefile is still using /bin/echo, but should be using /sw/bin/
>>> echo, because which echo says /sw/bin/echo.
>>> I had to change $(ECHO) to /sw/bin/echo and then it compiled, but
>>> that's of course no solution for other platforms.
>>> let's see if the rest of pd-extended compiles...
>>> marius.
>>>
>>> Hans-Christoph Steiner wrote:
>>>>
>>>> you are probably running your tests in your default 'bash'
>>>> environment. The script runs in its own 'sh' environment, which
>>>> is most likely somewhat different.
>>>>
>>>> Try the test in a test.sh script with #!/bin/sh at the top.
>>>>
>>>> .hc
>>>>
>>>>
>>>> On Apr 11, 2008, at 11:12 AM, marius schebella wrote:
>>>>> I cannot confirm that:
>>>>>
>>>>> echo -e marius\\nhans
>>>>> prints out
>>>>>
>>>>> marius
>>>>> hans
>>>>>
>>>>> as expected.
>>>>> but maybe the problem is that
>>>>> ECHO = echo
>>>>> prints out
>>>>> = echo
>>>>> marius.
>>>>>
>>>>> Hans-Christoph Steiner wrote:
>>>>>> It's actually, the "-e" option to 'echo', which means
>>>>>> "interpret extended syntax", like "\n". Not all 'echo's
>>>>>> support it. Your 'echo' does not, it just echos the "-e" and
>>>>>> "\n" unchanged.
>>>>>> Basically, someone needs to rewrite that chunk to not rely on
>>>>>> a specific version of 'echo'. I think it could be done with
>>>>>> 'sed' easily, or perhaps 'printf', if anyone wants to give it
>>>>>> a shot.
>>>>>> .hc
>>>>>> On Apr 10, 2008, at 9:05 PM, marius schebella wrote:
>>>>>>> I think the toxy error results from some sed problem, in
>>>>>>> particular the "-e" option of sed. sed seems to write a
>>>>>>> strange line into setup.wiq if I open it, the first line
>>>>>>> starts like
>>>>>>>
>>>>>>> -e // Do not edit this file (edit "../test/toxy/setup.wid",
>>>>>>> and run "make").\n//\nputs stderr [concat loading built-in
>>>>>>> widget definitions]
>>>>>>> package provide toxywidgets 0.1.0.17
>>>>>>>
>>>>>>> i am not a frequent sed user, and I also don't know what the
>>>>>>> makefile hack means, I think, hans, you added that, maybe for
>>>>>>> 10.5 it needs a special treatment:
>>>>>>>
>>>>>>> ROOT_DIR = ..
>>>>>>> WIDPATH = $(ROOT_DIR)/test/toxy/setup.wid
>>>>>>> WIQFILE = $(notdir $(WIDPATH:.wid=.wiq))
>>>>>>> # this is necessary to deal with cross-platform echo issues
>>>>>>> with '-e'
>>>>>>> ifeq ($(shell echo -e|sed 's|^-||'),e) ECHO = /bin/echo
>>>>>>> else
>>>>>>> ECHO = echo
>>>>>>> endif
>>>>>>> redefault: checkwiq $(WIQFILE) default
>>>>>>> checkwiq:
>>>>>>> @if [ -f $(WIQFILE) ] && ! [ -s $(WIQFILE) ] ; then \
>>>>>>> echo ERROR: empty file $(WIQFILE)... removed ; \
>>>>>>> rm -f $(WIQFILE) ; fi
>>>>>>> $(WIQFILE): $(WIDPATH)
>>>>>>> @echo transferring widget definitions from \"$<\" to \"$@\"
>>>>>>> # LATER think how to replace puts with pdtk_post
>>>>>>> $(ECHO) -e '// Do not edit this file (edit "$<", and run
>>>>>>> "make").\n//\nputs stderr [concat loading built-in widget
>>>>>>> definitions]' \
>>>>>>> | cat - $< | sed \
>>>>>>> -e '1,\|//$$|{p;d;}' \
>>>>>>> -e 's/\([\\\"]\)/\\\1/g' \
>>>>>>> -e 's/^.*$$/\"&\\n\"/' > $@
>>>>>>> @if [ -f $(WIQFILE) ] && ! [ -s $(WIQFILE) ] ; then \
>>>>>>> echo ERROR: transfer failed... $(WIQFILE) removed ; \
>>>>>>> rm -f $(WIQFILE) ; fi
>>>>>>> include $(ROOT_DIR)/Makefile.common
>>>>>>>
>>>>>>> marius.
>>>>>>>
>>>>>>> Hans-Christoph Steiner wrote:
>>>>>>>> 10.4 builds work on 10.5 fine, as far as I know. Are you
>>>>>>>> having problems building or using binaries? Yes, Fink is
>>>>>>>> not perfect, but imagine trying to build all that stuff by
>>>>>>>> hand... and then write up instructions for someone else to
>>>>>>>> do it... shudder...
>>>>>>>> - My FTGL update has be included in Fink, so no need for the
>>>>>>>> manual file install:
>>>>>>>> http://pdb.finkproject.org/pdb/package.php/libftgl1
>>>>>>>> - I haven't run into the ptex-nox-base problem myself, I
>>>>>>>> generally try installing all of the dependencies from
>>>>>>>> 'stable', then switch to 'unstable' for the rest. If an
>>>>>>>> 'unstable' package adds more dependencies, then I switch
>>>>>>>> back to 'stable' and try building them all there, then
>>>>>>>> switch back to 'unstable' to finish everything. It may
>>>>>>>> sound complicated, but it is not really. It is just some
>>>>>>>> copy-n- pasting of package names, and running 'fink
>>>>>>>> configure' a few times.
>>>>>>>> - the toxy build problem is the classic 'nifty hack' issue,
>>>>>>>> where the dev stuck some write-only code in the Makefile as
>>>>>>>> a quick hack to get things working, then built the library
>>>>>>>> upon that hack...
>>>>>>>> .hc
>>>>>>>> On Apr 10, 2008, at 4:03 AM, David Plans Casal wrote:
>>>>>>>>> On 10 Apr 2008, at 01:35, bsoisoi wrote:
>>>>>>>>>
>>>>>>>>>> are you on 10.5? Welcome to the mac os x pd-extended
>>>>>>>>>> nightmare
>>>>>>>>> Hear hear. 10.5 build is becoming the first reason in ten
>>>>>>>>> years I've
>>>>>>>>> looked for another dev platform than pd. Mind, I think
>>>>>>>>> maybe a switch
>>>>>>>>> back to old Linux is a better option.
>>>>>>>>>
>>>>>>>>> David
>>>>>>>>>
>>>>>>>>>> !B
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Apr 9, 2008, at 7:52 PM, marius schebella wrote:
>>>>>>>>>>
>>>>>>>>>>> tried fink install coreutils-default and...
>>>>>>>>>>> ... then I tried fink install sed and...
>>>>>>>>>>> ... then it did not work still.
>>>>>>>>>>> marius.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Hans-Christoph Steiner wrote:
>>>>>>>>>>>> Arg, this bug again. There is some crazy scripting in this
>>>>>>>>>>>> makefile, it
>>>>>>>>>>>> is quite problematic:
>>>>>>>>>>>>
>>>>>>>>>>>> http://pure-data.svn.sourceforge.net/viewvc/pure-data/
>>>>>>>>>>>> trunk/ externals/miXed/toxy/Makefile
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> .hc
>>>>>>>>>>>>
>>>>>>>>>>>> On Apr 9, 2008, at 6:22 PM, marius schebella wrote:
>>>>>>>>>>>>> hi,
>>>>>>>>>>>>> trying to build an intel build of pd-extended and get
>>>>>>>>>>>>> an error for
>>>>>>>>>>>>> toxy,
>>>>>>>>>>>>> don't know what is wrong. thanks,
>>>>>>>>>>>>> marius.
>>>>>>>>>>>>>
>>>>>>>>>>>>> gcc -Wall -W -Wstrict-prototypes -Wno-unused -Wno-
>>>>>>>>>>>>> parentheses
>>>>>>>>>>>>> -Wno-switch -march=pentium4 -msse2 -mfpmath=sse -ftree-
>>>>>>>>>>>>> vectorize
>>>>>>>>>>>>> -ftree-vectorizer-verbose=2 -DUNIX -DMACOSX -I . -
>>>>>>>>>>>>> I ../../../pd/
>>>>>>>>>>>>> src -I
>>>>>>>>>>>>> ../shared -c -o widgettype.o widgettype.c
>>>>>>>>>>>>> In file included from widgettype.c:16:
>>>>>>>>>>>>> setup.wiq:2: error: ‘e’ undeclared here (not in a
>>>>>>>>>>>>> function)
>>>>>>>>>>>>> setup.wiq:2: error: syntax error before ‘package’
>>>>>>>>>>>>> In file included from widgettype.c:16:
>>>>>>>>>>>>> setup.wiq:2:29: error: too many decimal points in number
>>>>>>>>>>>>> setup.wiq:4:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #LATER
>>>>>>>>>>>>> setup.wiq:5:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #glue
>>>>>>>>>>>>> setup.wiq:6:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #LATER
>>>>>>>>>>>>> setup.wiq:7:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #LATER
>>>>>>>>>>>>> setup.wiq:8:3: error: invalid preprocessing directive #way
>>>>>>>>>>>>> setup.wiq:9:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #right
>>>>>>>>>>>>> setup.wiq:11:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #LATER
>>>>>>>>>>>>> setup.wiq:14:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #FIXME
>>>>>>>>>>>>> setup.wiq:18: error: syntax error before ‘{’ token
>>>>>>>>>>>>> setup.wiq:23:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #valid
>>>>>>>>>>>>> setup.wiq:32:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #FIXME
>>>>>>>>>>>>> setup.wiq:33:3: error: invalid preprocessing directive #In
>>>>>>>>>>>>> setup.wiq:34:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #try
>>>>>>>>>>>>> setup.wiq:39:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #FIXME
>>>>>>>>>>>>> setup.wiq:40:7: error: invalid preprocessing directive #pd
>>>>>>>>>>>>> setup.wiq:73:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #LATER
>>>>>>>>>>>>> setup.wiq:80: error: syntax error before ‘{’ token
>>>>>>>>>>>>> setup.wiq:99: error: syntax error before ‘{’ token
>>>>>>>>>>>>> setup.wiq:106:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #LATER
>>>>>>>>>>>>> setup.wiq:111: error: stray ‘\’ in program
>>>>>>>>>>>>> setup.wiq:131:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #FIXME
>>>>>>>>>>>>> setup.wiq:133:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #FIXME
>>>>>>>>>>>>> setup.wiq:148:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #puts
>>>>>>>>>>>>> setup.wiq:150:7: error: invalid preprocessing directive
>>>>>>>>>>>>> #puts
>>>>>>>>>>>>> setup.wiq:154: error: ‘catch’ undeclared here (not in a
>>>>>>>>>>>>> function)
>>>>>>>>>>>>> setup.wiq:154: error: syntax error before ‘{’ token
>>>>>>>>>>>>> setup.wiq:175:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #puts
>>>>>>>>>>>>> setup.wiq:187: error: syntax error before ‘&’ token
>>>>>>>>>>>>> setup.wiq:187: error: ‘concat’ undeclared here (not in
>>>>>>>>>>>>> a function)
>>>>>>>>>>>>> setup.wiq:187: error: syntax error before ‘tcl’
>>>>>>>>>>>>> setup.wiq:188: error: stray ‘\’ in program
>>>>>>>>>>>>> setup.wiq:192:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #empirically
>>>>>>>>>>>>> setup.wiq:193:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #better
>>>>>>>>>>>>> setup.wiq:196: error: stray ‘\’ in program
>>>>>>>>>>>>> setup.wiq:202: error: stray ‘\’ in program
>>>>>>>>>>>>> setup.wiq:207:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #pdtk_canvas_mouseup
>>>>>>>>>>>>> setup.wiq:214: error: stray ‘\’ in program
>>>>>>>>>>>>> setup.wiq:243:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #undo
>>>>>>>>>>>>> setup.wiq:248:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #to
>>>>>>>>>>>>> setup.wiq:273:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #standard
>>>>>>>>>>>>> setup.wiq:275:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #FIXME
>>>>>>>>>>>>> setup.wiq:278: error: stray ‘\’ in program
>>>>>>>>>>>>> setup.wiq:290: error: stray ‘\’ in program
>>>>>>>>>>>>> setup.wiq:292: error: stray ‘\’ in program
>>>>>>>>>>>>> setup.wiq:298:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #puts
>>>>>>>>>>>>> setup.wiq:299: error: syntax error before ‘{’ token
>>>>>>>>>>>>> setup.wiq:315:3: error: invalid preprocessing directive
>>>>>>>>>>>>> #FIXME
>>>>>>>>>>>>> setup.wiq:318:2: error: invalid preprocessing directive #>
>>>>>>>>>>>>> setup.wiq:319:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:320:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:321:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:323:2: error: invalid preprocessing directive #>
>>>>>>>>>>>>> setup.wiq:324:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:325:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:326:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:327:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:329:2: error: invalid preprocessing directive #>
>>>>>>>>>>>>> setup.wiq:330:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:331:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:333:2: error: invalid preprocessing directive #@
>>>>>>>>>>>>> setup.wiq:336:2: error: invalid preprocessing directive #>
>>>>>>>>>>>>> setup.wiq:337:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:338:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:339:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:340:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:341:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:342:2: error: invalid preprocessing directive #.
>>>>>>>>>>>>> setup.wiq:344:2: error: invalid preprocessing directive #@
>>>>>>>>>>>>> setup.wiq:345: error: stray ‘#’ in program
>>>>>>>>>>>>> setup.wiq:345: error: stray ‘#’ in program
>>>>>>>>>>>>> make[3]: *** [widgettype.o] Error 1
>>>>>>>>>>>>> make[2]: *** [toxy_install] Error 2
>>>>>>>>>>>>> make[1]: *** [externals_install] Error 2
>>>>>>>>>>>>> make: *** [extended_install] Error 2
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> PD-dev mailing list
>>>>>>>>>>>>> PD-dev at iem.at
>>>>>>>>>>>>> http://lists.puredata.info/listinfo/pd-dev
>>>>>>>>>>>>
>>>>>>>>>>>> -----------------------------------------------------------
>>>>>>>>>>>> -------- ---------
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Access to computers should be unlimited and total. -
>>>>>>>>>>>> the hacker
>>>>>>>>>>>> ethic
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> PD-dev mailing list
>>>>>>>>>>> PD-dev at iem.at
>>>>>>>>>>> http://lists.puredata.info/listinfo/pd-dev
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> PD-dev mailing list
>>>>>>>>>> PD-dev at iem.at
>>>>>>>>>> http://lists.puredata.info/listinfo/pd-dev
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> PD-dev mailing list
>>>>>>>>> PD-dev at iem.at
>>>>>>>>> http://lists.puredata.info/listinfo/pd-dev
>>>>>>>> ---------------------------------------------------------------
>>>>>>>> --------- ----
>>>>>>>> I spent 33 years and four months in active military service
>>>>>>>> and during that period I spent most of my time as a high
>>>>>>>> class muscle man for Big Business, for Wall Street and the
>>>>>>>> bankers. - General Smedley Butler
>>>>>>>> _______________________________________________
>>>>>>>> PD-dev mailing list
>>>>>>>> PD-dev at iem.at
>>>>>>>> http://lists.puredata.info/listinfo/pd-dev
>>>>>> -----------------------------------------------------------------
>>>>>> ----------- ¡El pueblo unido jamás será
>>>>>> vencido!
>>>>
>>>>
>>>>
>>>> -------------------------------------------------------------------
>>>> ---------
>>>>
>>>> There is no way to peace, peace is the way. -A.J. Muste
>>>>
>>>>
>>>>
>>>
>>>
------------------------------------------------------------------------
----
All information should be free. - the hacker ethic
More information about the Pd-dev
mailing list