[PD] separate audio devices

[Johannes Kreidler]

thank you, matt, working fine now with asio   joh.

----- Original Message -----
From: "matthew jones" <M.Jones at signal.qinetiq.com>
To: "Johannes Kreidler" <jkreidler at gmx.de>
Sent: Monday, October 20, 2003 10:28 AM
Subject: Re: [PD] separate audio devices


> Hi Johannes,
>
> well firstly, I'd ask if you want to use ASIO drivers.  if you do, then do
> not use the output from listdev, but use the output from
"pd -asio -listdev"
> instead.
> this aside (presuming you don't have ASIO) you need to specify "'-audiodev
> 1 -channels 8" to use the multichannel driver.  or specify "audioindev"
and
> "audiooutdev" seperately.  (did I spell these right? best check)
>
> if this doesn't change anything then please mail back.
> cheers,
> matt
>
> -=-=-=-=-=-=-=-=-=-=-=-=-
> http://www.loopit.org/
> -=-=-=-=-=-=-=-=-=-=-=-=-
> ----- Original Message -----
> From: "Johannes Kreidler" <jkreidler at gmx.de>
> To: "pd-mailinglist" <pd-list at iem.at>
> Sent: Monday, October 20, 2003 7:52 AM
> Subject: [PD] separate audio devices
>
>
> hi list,
> sorry for newbie-stuff; i've got some trouble getting all channels of my
> edirol da-2496 -interface startet with pd on Win 2k.
>
> "pd -listdev" shows:
>
> [MIDI]
> "audio input device #1: Edirol DA-PCI Multichannel
> audio input device #2: Edirol DA-PCI 1/2
> audio input device #3: Edirol DA-PCI 5/6
> audio input device #4: Edirol DA-PCI 5/6
> audio input device #5: Edirol DA-PCI 7/8
> audio input device #6: Edirol DA-PCI Mon. Mixer
> audio output device #1: Edirol DA-PCI Multichannel
> audio output device #2: Edirol DA-PCI 1/2
> audio output device #3: Edirol DA-PCI 3/4
> audio output device #4: Edirol DA-PCI 5/6
> audio output device #5: Edirol DA-PCI 7/8"
>
> and when starting e.g. with "pd -audiodev 3,2" it is said:
>
> "separate audio device choice not supported; using sequential devices."
>
> and there are always 2 in and out channels only.
>
> by typing "pd -channels [2+n]" or anything with a comma (e.g. "2,1"), i
get:
>
> "waveInOpen: Dieses Format wird nicht unterstuetzt oder kann nicht
> uebersetzt werden. Benutzen Sie die Funktion 'Capabilities', um die
> unterstützten Formate zu ermitteln."
>
> if anybody could help me it would be very appreciated, cause i need 4
> output-channels in my next performance in november.
>
> thnx, johannes kreidler
>