[PD] problem with pdp_theonice~

[yves degoyon]

hola,

well, here you have a bandwidth issue,
either your internet connection is not good enough
to transmit video ( try to lower the quality in that case )
but, most probably, the giss server is a bit saturated
and it doesn't take any more incoming stream.

join the giss channel to see if we can find a solution.

saludos,
sevy

Jack wrote:

>Hello list, hello Yves,
>I have a problem with the patch 'giss-2.0.pd' (pd-extended 0.39.3- 
>extended – MacosX.4.11 – X11 1.1.3 – XFree86 4.4.0).
>I have created a channel on http://giss.tv/.
>I use a FireWire camera and i see the preview (no problem).
>When i push the start bang in the emission, 'frames emited' go to 39  
>or 40 or 41 then stop and Pd freezes during 5 minutes then output :  
>'shutting down encoder'.
>
>here the output from PD :
>pdp_theonice~ : setting password to *****
>pdp_theonice~ : connecting to http://stream.giss.tv:8000/****.org
>pdp_theonice~ : connection request but a connection is pending . . .  
>disconnecting
>pdp_theonice~ : connection thread 26104523 launched
>pdp_theonice~ : connecting to port 8000
>pdp_theonice~ : logged in to stream.giss.tv
>pdp_theonice~ : connecting child 26104523 exiting. . . .
>pdp_theonice~ : initializing encoder. . .
>pdp_theonice~ : encoder initialized.
>pdp_theonice~ : writing headers. . .
>pdp_theonice~ : start streaming at 7 frames/second
>
>(freeze here)
>then 5 mn later :
>
>pdp_theonice~ : could not write audio packet (ret=-1).
>pdp_theonice~ : shutting down encoder
>pdp_theonice~ : could not write audio packet (ret=-1).
>pdp_theonice~ : could not write audio packet (ret=-1).
>
>Note : it's the same with a quicktime video
>
>any idea ?
>
>Jack
>_______________________________________________
>PD-list at iem.at mailing list
>UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
>
>
>  
>