[PD] bcr2000 and midi-feedback

IOhannes m zmoelnig zmoelnig at iem.at
Tue Jul 22 16:16:12 CEST 2008


Atte André Jensen wrote:
> Hi

> 
> This basically works, the upper one is receiving from the bcr and moving 
> the fader in pd, the lower one is updating the display on the bcr when 
> the knob is moved in pd.
> 
> The problem is that pd sends it's send-symbol, even if the fader is 

i doubt that Pd sends it's send-symbol....

> moved as a result of the receive-symbol. This means that the bcr get's 
> the value right back, with a small delay, which causes the whole to be 
> very reluctent to accept movements from the bcr.
> 
> I could make some logic that doesn't send the value back if it was 
> received from midi, but thought I'd ask if there was a simpler solution? 
> For instance is it possible to have pd's knobs *not* send it's 
> send-symbol if the fader was moved as a result of a receive-symbol?
> 



anyhow, under the link below [1] is the abstraction that we use in our 
CUBEmixer-application in order to interact with midi (using 
behringer-sh!t) among other things.

use it like

[ctlin 1]
|
[sendreceive send]
|
[ctlout 0]


[r bla]
|
[ \


the abstraction depends on iemlib2 in order to have settable 
sends/receives but if you don't want this, just replace it by ordinary 
[s]/[r].


fgmasdr.
IOhannes


[1] 
https://iem.svn.sourceforge.net/svnroot/iem/spatialization/CUBEmixer/trunk/lib/abs/sendreceive.pd




More information about the Pd-list mailing list