[PD] comport questions

[Martin Peach]

It should work. You could try using a terminal program to manually 
connect. From skimming the manual for that projector it says the RS-232 
is for firmware upgrades only...

Martin

On 2012-11-28 14:34, Pagano, Patrick wrote:
> Hi
>
> With the recent talk about comport I have tried to use it to control a
> BenQ MX660P Projector and I am having no response from the machine.
>
> RS-232 protocol
>
> Baud Rate
>
> 	
>
> 115200 bps (default)
>
> Changeable(2400/4800/9600/14400/19200/38400/57600/115200)
>
> Setting in OSD menu
>
> Data Length
>
> 	
>
> 8 bit
>
> Parity Check
>
> 	
>
> None
>
> Stop Bit
>
> 	
>
> 1 bit
>
> The command to turn it on is:
>
> <CR>*pow=on#<CR>
>
> But I am getting no response from the machine.
>
> I am using the ascii list of bites to send the message, maybe this is
> incorrect?
>
> Perhaps someone may shed some light upon this for me?
>
> I am on Windows7, pd 42-5 extended
>
> Patrick Pagano, B.S, M.F.A
>
> Assistant in Digital Arts and Science
>
> Digital Media Projection and Audio Design
>
> Digital Worlds Institute
>
> University of Florida, USA
>
> (352)294-2020
>
>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
>