[PD] comport rxerrors

[Martin Peach]

On Wed, Sep 16, 2015 at 4:08 AM, <rolfm at dds.nl> wrote:

>
>
> Martin Peach <chakekatzil at gmail.com> schreef:
>
> What errors do you get? Do you get data OK/wrong/some/none? What baud rate
>> are you using?
>>
>>
> RXERRORS on serial line (997)
>
> after opening the port 10 of these messages appear.
> then after around 40 secs the message is given continouisly.
>
> i tried 9600 and 115200 as baud rates: same result.
>
> no data comes through.
>
> this with a simple setup:
> Arduino sketch does every 3 secs a Serial.println,
> PD patch only with [comport] and [print].
>
>
In your arduino code you will have a line
Serial.begin();
with the baud rate inside the parentheses. It should be the same as what
[comport] is using.
Also Serial,println() sends ASCII and [comport] will output those ASCII
codes, not the actual text.
So if the baud rates are really the same at both ends and you still get no
data, then [comport] is buggy on Win10, beyond printing the non-error
message.

Martin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20150916/16b421f9/attachment.html>