<DIV style="FONT-SIZE: 12px; FONT-FAMILY: verdana, arial">
<DIV> </DIV>
<DIV>Same problem after installing the last driver for my VGA card.</DIV>
<DIV>Does anybody have a small mov file that I can test to see whether if it is my file or my system that fails.</DIV>
<DIV>Do you have a check list to make sure the PD/PDP/PiDiP is well installed ?</DIV>
<DIV> </DIV>
<DIV>thanks you</DIV>
<DIV><BR> </DIV>
<DIV>
<DIV>
<TABLE>
<TBODY>
<TR>
<TD width=1 bgColor=#000000></TD>
<TD> </TD>
<TD>
<DIV>> </DIV>
<DIV>> Sorry I made a mistake on my XF86config file since, FC4 use</DIV>
<DIV>> X.org's system...</DIV>
<DIV>> So here is my xorg.conf file with nvidia driver :</DIV>
<DIV>> [...]</DIV>
<DIV>> Section "Monitor"</DIV>
<DIV>> Identifier "Monitor0"</DIV>
<DIV>> VendorName "Monitor Vendor"</DIV>
<DIV>> ModelName "Dell P1130"</DIV>
<DIV>> DisplaySize 400 300</DIV>
<DIV>> HorizSync 30.0 - 130.0</DIV>
<DIV>> VertRefresh 48.0 - 170.0</DIV>
<DIV>> Option "dpms"</DIV>
<DIV>> EndSection</DIV>
<DIV>> </DIV>
<DIV>> Section "Device"</DIV>
<DIV>> Identifier "Videocard0"</DIV>
<DIV>> Driver "nv"</DIV>
<DIV>> VendorName "Videocard vendor"</DIV>
<DIV>> BoardName "NVIDIA GeForce 6600 GT"</DIV>
<DIV>> EndSection</DIV>
<DIV>> </DIV>
<DIV>> Section "Screen"</DIV>
<DIV>> Identifier "Screen0"</DIV>
<DIV>> Device "Videocard0"</DIV>
<DIV>> Monitor "Monitor0"</DIV>
<DIV>> DefaultDepth 24</DIV>
<DIV>> SubSection "Display"</DIV>
<DIV>> Viewport 0 0</DIV>
<DIV>> Depth 16</DIV>
<DIV>> Modes "800x600" "640x480"</DIV>
<DIV>> EndSubSection</DIV>
<DIV>> SubSection "Display"</DIV>
<DIV>> Viewport 0 0</DIV>
<DIV>> Depth 24</DIV>
<DIV>> Modes "1280x1024" "1152x864" "1152x768"</DIV>
<DIV>> "1024x768" "800x600" "640x480"</DIV>
<DIV>> EndSubSection</DIV>
<DIV>> EndSection</DIV>
<DIV>> </DIV>
<DIV>> Section "DRI"</DIV>
<DIV>> Group 0</DIV>
<DIV>> Mode 0666</DIV>
<DIV>> EndSection</DIV>
<DIV>> </DIV>
<DIV>> </DIV>
<DIV>> Seems pretty ok to me. I still can't explain my green splitted</DIV>
<DIV>> screen.</DIV>
<DIV>> </DIV>
<DIV>> </DIV>
<DIV>> > > ola,</DIV>
<DIV>> > </DIV>
<DIV>> > ola,</DIV>
<DIV>> > </DIV>
<DIV>> > > seems a problem with the xvideo output,</DIV>
<DIV>> > > can you try to play it with a pdp_glx ?</DIV>
<DIV>> > </DIV>
<DIV>> > same result except it plays slower. glx use opengl i guess.</DIV>
<DIV>> > That's basically what I want escape since I'm doing really</DIV>
<DIV>> > simple processing on big files for this project.</DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > > then, please, indicate also your graphic driver</DIV>
<DIV>> > > and system..</DIV>
<DIV>> > </DIV>
<DIV>> > Here i'm limited with my linux knowledge... I'm under Fedora</DIV>
<DIV>> > Core4. Brand new installed and updated according to the</DIV>
<DIV>> > administrator. I've checked the XF86Config and it seems I use</DIV>
<DIV>> > only generic driver. The card is a NVidia GeForce 6600 GT.</DIV>
<DIV>> > here is an extract of the XF86Config.eg that is in this path</DIV>
<DIV>> > /usr/X11R6/lib/Server</DIV>
<DIV>> > Do you think that installing a specific driver would work</DIV>
<DIV>> better ?</DIV>
<DIV>> > </DIV>
<DIV>> > I'm not sure that the info you need to help me. Let me know</DIV>
<DIV>> > what command shell I should type to get the info.</DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > #</DIV>
<DIV>> ></DIV>
<DIV>> **********************************************************************</DIV>
<DIV>> > # Graphics device section</DIV>
<DIV>> > #</DIV>
<DIV>> ></DIV>
<DIV>> **********************************************************************</DIV>
<DIV>> > </DIV>
<DIV>> > # Any number of graphics device sections may be present</DIV>
<DIV>> > </DIV>
<DIV>> > Section "Device"</DIV>
<DIV>> > </DIV>
<DIV>> > # The Identifier must be present.</DIV>
<DIV>> > </DIV>
<DIV>> > Identifier "Generic VGA"</DIV>
<DIV>> > Driver "vga"</DIV>
<DIV>> > # Chipset "generic"</DIV>
<DIV>> > # VideoRam 256</DIV>
<DIV>> > # Clocks 25.2 28.3</DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > thks a lot.</DIV>
<DIV>> > nicolaos.</DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > > </DIV>
<DIV>> > > >I can play my QT file with lqtplay. The result is not quite</DIV>
<DIV>> > > >smooth and some frames are dropped. Since Pdp or pidip</DIV>
<DIV>> use the</DIV>
<DIV>> > > >same libquicktime, i'm wondering why I get such result (green</DIV>
<DIV>> > > >picture, split)when I play it.</DIV>
<DIV>> > > >Here is the output of lqtplay :</DIV>
<DIV>> > > ></DIV>
<DIV>> > > >$ lqtplay AE_BackRight.mov </DIV>
<DIV>> > > >INFO: playing AE_BackRight.mov</DIV>
<DIV>> > > > video: 1 track(s)</DIV>
<DIV>> > > > track #1</DIV>
<DIV>> > > > width : 1024</DIV>
<DIV>> > > > height: 576</DIV>
<DIV>> > > > depth : 24 bit</DIV>
<DIV>> > > > rate : 25.00 fps</DIV>
<DIV>> > > > codec : jpeg</DIV>
<DIV>> > > > audio: 1 track(s)</DIV>
<DIV>> > > > track #1</DIV>
<DIV>> > > > rate : 48000 Hz</DIV>
<DIV>> > > > bits : 16</DIV>
<DIV>> > > > chans : 1</DIV>
<DIV>> > > > codec : twos</DIV>
<DIV>> > > >Timescale: 25</DIV>
<DIV>> > > >INFO: Xvideo port 61: 0x32595559 (YUY2) packed [BC_YUV422]</DIV>
<DIV>> > > >INFO: Xvideo port 61: 0x32315659 (YV12) planar [BC_YUV420P]</DIV>
<DIV>> > > >INFO: Xvideo port 61: 0x59565955 (UYVY) packed</DIV>
<DIV>> > > >INFO: Xvideo port 61: 0x30323449 (I420) planar [BC_YUV420P]</DIV>
<DIV>> > > >INFO: Xvideo port 61: 0x3 () packed</DIV>
<DIV>> > > >Stream colormodel YUV 4:2:2 planar (jpeg), using YUV 4:2:2</DIV>
<DIV>> > > >packed (YUY2)</DIV>
<DIV>> > > >INFO: using BC_YUV422 + Xvideo extention</DIV>
<DIV>> > > >INFO: window size is 1024x576</DIV>
<DIV>> > > ></DIV>
<DIV>> > > ></DIV>
<DIV>> > > >Any idea how to make this file work into PD/pdp/pidip ?</DIV>
<DIV>> > > >Any idea what codec will make PD/... play it smoothly ? I may</DIV>
<DIV>> > > >then convert the file with lqt_transcode.</DIV>
<DIV>> > > ></DIV>
<DIV>> > > >thanks a lot,</DIV>
<DIV>> > > >nicolaos.</DIV>
<DIV>> > > ></DIV>
<DIV>> > > ></DIV>
<DIV>> > > ></DIV>
<DIV>> > > ></DIV>
<DIV>> > > > </DIV>
<DIV>> > > ></DIV>
<DIV>> > > >>Merci sevY,</DIV>
<DIV>> > > >>sorry, i'm a bit slow for testing the solutions, I'm</DIV>
<DIV>> fulltime</DIV>
<DIV>> > > >>busy with 4-5 projects.</DIV>
<DIV>> > > >>So qtinfo gives me :</DIV>
<DIV>> > > >>$ qtinfo ./AE_FrontRight.mov </DIV>
<DIV>> > > >></DIV>
<DIV>> > > >>File ./AE_FrontRight.mov:</DIV>
<DIV>> > > >> 1 audio tracks.</DIV>
<DIV>> > > >> 1 channels, 16 bits, sample rate 48000, length 29721600</DIV>
<DIV>> > > >>samples, compressor twos.</DIV>
<DIV>> > > >> Sample format: 16 bit signed.</DIV>
<DIV>> > > >> supported.</DIV>
<DIV>> > > >> 1 video tracks.</DIV>
<DIV>> > > >> 1024x576, depth 24, rate 25.000000, length 15480 frames,</DIV>
<DIV>> > > >>compressor jpeg.</DIV>
<DIV>> > > >> Native colormodel: YUV 4:2:2 planar (jpeg)</DIV>
<DIV>> > > >> Interlace mode: None (Progressive)</DIV>
<DIV>> > > >> supported.</DIV>
<DIV>> > > >>Deleting quicktime codecs</DIV>
<DIV>> > > >></DIV>
<DIV>> > > >>It's a pretty big file coming directly from After Effect as</DIV>
<DIV>> > > >>jpeg sequence. YUV 4:2:2 must be the problem, since i'm</DIV>
<DIV>> pretty</DIV>
<DIV>> > > >>sure pdp_qt or yqt can decode jpeg sequence.</DIV>
<DIV>> > > >>I would like to keep it like this since I want keep the high</DIV>
<DIV>> > > >>quality from it. Is there a color mode conversion in</DIV>
<DIV>> pdp/pidip</DIV>
<DIV>> > > >>package ?</DIV>
<DIV>> > > >></DIV>
<DIV>> > > >>thanks.</DIV>
<DIV>> > > >></DIV>
<DIV>> > > >>nicolaos.</DIV>
<DIV>> > > >></DIV>
<DIV>> > > >></DIV>
<DIV>> > > >></DIV>
<DIV>> > > >></DIV>
<DIV>> > > >></DIV>
<DIV>> > > >> </DIV>
<DIV>> > > >></DIV>
<DIV>> > > >>>ola,</DIV>
<DIV>> > > >>></DIV>
<DIV>> > > >>>seems ther's a problem with your codec and the libquicktime</DIV>
<DIV>> > > >>>you are using, which version of libquicktime and which</DIV>
<DIV>> codec</DIV>
<DIV>> > > >>>( do a qtinfo on your movie )</DIV>
<DIV>> > > >>></DIV>
<DIV>> > > >>>for the font, you are missing this file :</DIV>
<DIV>> > > >>>/usr/X11R6/lib/X11/fonts/TTF/helmetr.ttf</DIV>
<DIV>> > > >>></DIV>
<DIV>> > > >>>you can get it from pidip source code.</DIV>
<DIV>> > > >>></DIV>
<DIV>> > > >>>suerte,</DIV>
<DIV>> > > >>>sevy</DIV>
<DIV>> > > >>></DIV>
<DIV>> > > >>>nicolas.sauret@laposte.net wrote:</DIV>
<DIV>> > > >>></DIV>
<DIV>> > > >>> </DIV>
<DIV>> > > >>></DIV>
<DIV>> > > >>>>Hello all,</DIV>
<DIV>> > > >>>></DIV>
<DIV>> > > >>>>It's finally installed. I only have a error loading the</DIV>
<DIV>> > font.</DIV>
<DIV>> > > >>>>Yves propose to make install from Pidip but there is</DIV>
<DIV>> no such</DIV>
<DIV>> > > >>>>things in the Pd-Extended...</DIV>
<DIV>> > > >>>></DIV>
<DIV>> > > >>>>The problem actually is that using pdp_yqt, I get a green</DIV>
<DIV>> > > >>>>screen (all green).</DIV>
<DIV>> > > >>>>Using pdp_qt, I get an interesting split composed of 7</DIV>
<DIV>> > > >>>> </DIV>
<DIV>> > > >>>></DIV>
<DIV>> > > >parts :</DIV>
<DIV>> > > > </DIV>
<DIV>> > > ></DIV>
<DIV>> > > >>>>bottom half (black)</DIV>
<DIV>> > > >>>>left and right half of the bottom half of the bottom up</DIV>
<DIV>> > (half</DIV>
<DIV>> > > >>>>picture)</DIV>
<DIV>> > > >>>>and so on wich make 7 parts. The picture are green but at</DIV>
<DIV>> > > >>>>least I can see my film.</DIV>
<DIV>> > > >>>></DIV>
<DIV>> > > >>>>the film is in YUV422. I guess the problem comes from</DIV>
<DIV>> here.</DIV>
<DIV>> > > >>>>How to arrange this ?</DIV>
<DIV>> > > >>>></DIV>
<DIV>> > > >>>>thanks</DIV>
<DIV>> > > >>>>++</DIV>
<DIV>> > > >>>>nic.</DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > Accédez au courrier électronique de La Poste :</DIV>
<DIV>> www.laposte.net ; </DIV>
<DIV>> > 3615 LAPOSTENET (0,34 €/mn) ; tél : 08 92 68 13 50 (0,34€/mn)</DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > </DIV>
<DIV>> > _______________________________________________</DIV>
<DIV>> > PD-list@iem.at mailing list</DIV>
<DIV>> > UNSUBSCRIBE and account-management -></DIV>
<DIV>> http://lists.puredata.info/listinfo/pd-list</DIV>
<DIV>> > </DIV>
<DIV>> </DIV>
<DIV>> Accédez au courrier électronique de La Poste : www.laposte.net ; </DIV>
<DIV>> 3615 LAPOSTENET (0,34 €/mn) ; tél : 08 92 68 13 50 (0,34€/mn)</DIV>
<DIV>> </DIV>
<DIV>> </DIV>
<DIV>> </DIV></TD></TR></TBODY></TABLE></DIV></DIV></DIV><DIV style='{font-family:verdana, arial;font-size: 10px}'>
<DIV><br></DIV>
<DIV><br></DIV>
<DIV><EM>Accédez au courrier électronique de La Poste : www.laposte.net ;</EM></DIV>
<DIV><EM>3615 LAPOSTENET (0,34 /mn) ; tél : 08 92 68 13 50 (0,34/mn)</EM></DIV>
</DIV>