Hi all,<br>I'm kind of newbie to arduino and pduino, standardFrmata2.1. I made some simple successful experiments with a GSR and analog inputs, but now i'm trying to read values from a Memsic accelerometers and can't work it out.<br>
Memsic outputs x-value and y-value on digital inputs 3 and 2. Using the code provided within the Memsic arduino tutorial I can see values through arduino serial monitor, but with pduino nothing is happening.<br><br>Running arduino-test and selecting the proper port (4) i get some errors:<br>
<br>get_baud_ratebits: 57600.000000<br>set_baudrate baudbits: 4097<br>[comport] opened serial line device 4 (/dev/ttyUSB0)<br><br><u>[comport] write returned -1, errno is 11<br>Write error, maybe TX-OVERRUNS on serial line</u><br clear="all">
<br>but [version(, [firmware( messages works properly. Then i make sure the pinMode is set to 0, but still nothing.<br>I'm sure I'm missing something here, so any help would be much appreciated and forgive me... I'm learning.<br>
thanks in advance,<br><br><br><br>-- <br>Marco Donnarumma aka TheSAD<br>Independent New Media Arts Professional, Performer, Teacher - Edinburgh, UK<br><br><br>PORTFOLIO: <a href="http://marcodonnarumma.com">http://marcodonnarumma.com</a><br>
LAB: <a href="http://www.thesaddj.com">http://www.thesaddj.com</a> | <a href="http://cntrl.sourceforge.net">http://cntrl.sourceforge.net</a> | <a href="http://www.flxer.net">http://www.flxer.net</a><br>EVENT: <a href="http://www.liveperformersmeeting.net">http://www.liveperformersmeeting.net</a><br>