Hi,<br><br>I noticed different strange comportments with [line].<br><br>1)<br>When I send, for exemple, [100 10000( to a [line] for the second time the line give me 100 during 10 sec.<br>I expected it no to give me anything as it is said in the help-file :<br>
"You should also note that if you click that [bng] again a second time, nothing happens. This is because [line] is already at 1000, so sending it new instructions to ramp to 1000 is meaningless and has no effect."<br>
<br>2)<br>When I send [stop( to the line I can get the last send value in the [number \ I've put under. OK.<br>But this last value is not use as the new beginning of the next ramp. It's the last ramp's beginning that is.<br>
Whereas if I send new taget and time during the ramp it's the current value which is use as the beginning value for the ramp.<br><br>3)<br>I tried to put a [sel ] under the [line ] (with sure sent value by the line) to reset the line, or to stop the ramp. <br>
But the result is different if the bang is send from the [sel] than if I click it manually.<br>--> If I bang manually [stop( the ramp stop, an I get the last value.<br>--> If the [sel ] bang [stop( the ramp stop but send me the last beginning value.<br>
I try to put a [i]--[change] under the line expecting to solve the 1) problem... but it doesn't work.<br><br>Is it the same for everyone ?<br>I use 0.42.5-extended-rc5 on Ubuntu Lucid.<br><br>Thank you.<br><br>01ivier.<br>
<br><br><br>