<div dir="ltr"><div>Reading through the manuals I'm trying different stuff. Thought of connecting to the lanbox (I spelled it wrong in the subject of this thread) via [comport]. I do get connected, but can't really see how to send commands. <br>
I'm trying to connect via [tcpsend] via ethernet cause I think it's easier to send commands in ASCII (looks easier to me at least), but the manual says that the lanbox will ask for a password (which is 777 followed by a carriege return, so in ASCII it will be 55 55 55 13). So I'm sending [connect 192.168.1.77 4777( to [tcpsend], Pd freezes for a while and the the console says 'tcpsend: connecting to port 4777', but if I immediately after send [55 55 55 13( to [tcpsend] the console says 'tcpsend: not connected'. Anyway, the toggle underneath [tcpsend] never goes to one, so no connection is actually established.<br>
</div>Any ideas on this one guys?<br></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Sun, Mar 17, 2013 at 11:35 PM, Alexandros Drymonitis <span dir="ltr"><<a href="mailto:adrcki@gmail.com" target="_blank">adrcki@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Actually all I need to do is control two white lights which are connected to a DMX dimmer each. I've done a simple setup on lanbox's software, but can't really see how to control it via Pd. It's on channels 1 and 2, so I guess I need to send something like a list with the channel number and the brightness number, right? what's the exact syntax for [udpsend]?<br>
</div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><br><div class="gmail_quote">On Sun, Mar 17, 2013 at 11:31 PM, <span dir="ltr"><<a href="mailto:brandt@subnet.at" target="_blank">brandt@subnet.at</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
i worked with it and as alexandros said itīs really easy. i once made a patch, which was a kind of simulation of an avolite board from the eighties. worked straight out the box<br>
<br>
all the best<br>
<br>
<br>
Zitat von dreamer <<a href="mailto:dreamer@puikheid.nl" target="_blank">dreamer@puikheid.nl</a>>:<div><div><br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
On Sat, Mar 16, 2013 at 9:49 PM, Alexandros Drymonitis <<a href="mailto:adrcki@gmail.com" target="_blank">adrcki@gmail.com</a>>wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi,<br>
<br>
</blockquote>
Has anyone used the Lanbox-LCX sending it control data from Pd? On lanbox's<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
website I saw that it also receives TCP commands. Would mrpeach library's<br>
[tcpsend] do?<br>
<br>
</blockquote>
<br>
Yes I have. You can control the lanbox-lcx with simple TCP/UDP commands.<br>
At least we used [udpsend] to transmit the datapackets (looking back at my<br>
patches. it's also from mrpeach).<br>
But [tcpsend] should work just the same (we had to enable UDP-mode in the<br>
firmware afaik).<br>
<br>
I have borrowed a prototype lcx+ but I don't have it working at the moment.<br>
All I can tell you that it is quite trivial to interface with the lanbox.<br>
If you need any more specific information I can get it from one of the devs<br>
if you want :)<br>
<br>
grtz,<br>
drmr<br>
<br>
</blockquote>
<br>
<br>
</div></div></blockquote></div><br></div>
</div></div></blockquote></div><br></div>