[PD-cvs] externals/iemlib CONTENT.txt, NONE, 1.1 CHANGES.txt, 1.1.1.1, 1.2 GnuLGPL.txt, 1.1.1.1, 1.2 INSTALL_win.txt, 1.1, 1.2 LICENCE.txt, 1.3, 1.4 README_win.txt, 1.1, 1.2
IOhannes m zmölnig
zmoelnig at users.sourceforge.net
Thu Jun 2 20:37:12 CEST 2005
- Previous message: [PD-cvs] externals/iemlib/iemhelp hdial.pd, NONE, 1.1 help-hp10_bess~.pd, NONE, 1.1 help-hp2_bess~.pd, NONE, 1.1 help-hp3_bess~.pd, NONE, 1.1 help-hp4_bess~.pd, NONE, 1.1 help-hp5_bess~.pd, NONE, 1.1 help-hp6_bess~.pd, NONE, 1.1 help-hp7_bess~.pd, NONE, 1.1 help-hp8_bess~.pd, NONE, 1.1 help-hp9_bess~.pd, NONE, 1.1 help-iem_r.pd, NONE, 1.1 help-iem_s.pd, NONE, 1.1 help-lp10_bess~.pd, NONE, 1.1 help-lp2_bess~.pd, NONE, 1.1 help-lp3_bess~.pd, NONE, 1.1 help-lp4_bess~.pd, NONE, 1.1 help-lp5_bess~.pd, NONE, 1.1 help-lp6_bess~.pd, NONE, 1.1 help-lp7_bess~.pd, NONE, 1.1 help-lp8_bess~.pd, NONE, 1.1 help-lp9_bess~.pd, NONE, 1.1 help-parent$0.pd, NONE, 1.1 help-parentdollarzero.pd, NONE, 1.1 hradio.pd, NONE, 1.1 test-parentdollarzero.pd, NONE, 1.1 vradio.pd, NONE, 1.1 0.INTRO.txt, 1.2, 1.3 7_guis-INTRO.pd, 1.4, 1.5 all_guis-INTRO.pd, 1.4, 1.5 bng.pd, 1.4, 1.5 gui-menue.pd, 1.4, 1.5 help-$n.pd, 1.4, 1.5 help-FIR~.pd, 1.4, 1.5 help-LFO_noise~.pd, 1.4, 1.5 help-add2_comma.pd, 1.4, 1.5 help-addl~.pd, 1.4, 1.5 help-any.pd, 1.4, 1.5 help-ap1~.pd, 1.4, 1.5 help-ap2~.pd, 1.4, 1.5 help-bpe.pd, 1.4, 1.5 help-bpq2~.pd, 1.4, 1.5 help-bpw2~.pd, 1.4, 1.5 help-bsq2~.pd, 1.4, 1.5 help-bsw2~.pd, 1.4, 1.5 help-db2v.pd, 1.4, 1.5 help-dbtofad.pd, 1.4, 1.5 help-default.pd, 1.4, 1.5 help-divl~.pd, 1.4, 1.5 help-dollarg.pd, 1.4, 1.5 help-dsp.pd, 1.4, 1.5 help-dsp~.pd, 1.4, 1.5 help-exp_inc.pd, 1.4, 1.5 help-f2note.pd, 1.4, 1.5 help-fade~.pd, 1.4, 1.5 help-fadtodb.pd, 1.4, 1.5 help-fadtorms.pd, 1.4, 1.5 help-float24.pd, 1.4, 1.5 help-for++.pd, 1.4, 1.5 help-gate.pd, 1.4, 1.5 help-hml_shelf~.pd, 1.4, 1.5 help-hp10_butt~.pd, 1.4, 1.5 help-hp10_cheb~.pd, 1.4, 1.5 help-hp10_crit~.pd, 1.4, 1.5 help-hp1~.pd, 1.4, 1.5 help-hp2_butt~.pd, 1.4, 1.5 help-hp2_cheb~.pd, 1.4, 1.5 help-hp2_crit~.pd, 1.4, 1.5 help-hp2~.pd, 1.4, 1.5 help-hp3_butt~.pd, 1.4, 1.5 help-hp3_cheb~.pd, 1.4, 1.5 help-hp3_crit~.pd, 1.4, 1.5 help-hp4_butt~.pd, 1.4, 1.5 help-hp4_cheb~.pd, 1.4, 1.5 help-hp4_crit~.pd, 1.4, 1.5 help-hp5_butt~.pd, 1.4, 1.5 help-hp5_cheb~.pd, 1.4, 1.5 help-hp5_crit~.pd, 1.4, 1.5 help-hp6_butt~.pd, 1.4, 1.5 help-hp6_cheb~.pd, 1.4, 1.5 help-hp6_crit~.pd, 1.4, 1.5 help-hp7_butt~.pd, 1.4, 1.5 help-hp7_cheb~.pd, 1.4, 1.5 help-hp7_crit~.pd, 1.4, 1.5 help-hp8_butt~.pd, 1.4, 1.5 help-hp8_cheb~.pd, 1.4, 1.5 help-hp8_crit~.pd, 1.4, 1.5 help-hp9_butt~.pd, 1.4, 1.5 help-hp9_cheb~.pd, 1.4, 1.5 help-hp9_crit~.pd, 1.4, 1.5 help-iem_anything.pd, 1.4, 1.5 help-iem_append.pd, 1.4, 1.5 help-iem_blocksize~.pd, 1.4, 1.5 help-iem_i_route.pd, 1.4, 1.5 help-iem_pbank_csv.pd, 1.4, 1.5 help-iem_prepend.pd, 1.4, 1.5 help-iem_receive.pd, 1.4, 1.5 help-iem_route.pd, 1.4, 1.5 help-iem_samplerate~.pd, 1.4, 1.5 help-iem_sel_any.pd, 1.4, 1.5 help-iem_send.pd, 1.4, 1.5 help-ii.pd, 1.4, 1.5 help-iiroute.pd, 1.4, 1.5 help-init.pd, 1.4, 1.5 help-int_fract~.pd, 1.4, 1.5 help-list2send.pd, 1.4, 1.5 help-lp10_butt~.pd, 1.4, 1.5 help-lp10_cheb~.pd, 1.4, 1.5 help-lp10_crit~.pd, 1.4, 1.5 help-lp1_t~.pd, 1.4, 1.5 help-lp1~.pd, 1.4, 1.5 help-lp2_butt~.pd, 1.4, 1.5 help-lp2_cheb~.pd, 1.4, 1.5 help-lp2_crit~.pd, 1.4, 1.5 help-lp2~.pd, 1.4, 1.5 help-lp3_butt~.pd, 1.4, 1.5 help-lp3_cheb~.pd, 1.4, 1.5 help-lp3_crit~.pd, 1.4, 1.5 help-lp4_butt~.pd, 1.4, 1.5 help-lp4_cheb~.pd, 1.4, 1.5 help-lp4_crit~.pd, 1.4, 1.5 help-lp5_butt~.pd, 1.4, 1.5 help-lp5_cheb~.pd, 1.4, 1.5 help-lp5_crit~.pd, 1.4, 1.5 help-lp6_butt~.pd, 1.4, 1.5 help-lp6_cheb~.pd, 1.4, 1.5 help-lp6_crit~.pd, 1.4, 1.5 help-lp7_butt~.pd, 1.4, 1.5 help-lp7_cheb~.pd, 1.4, 1.5 help-lp7_crit~.pd, 1.4, 1.5 help-lp8_butt~.pd, 1.4, 1.5 help-lp8_cheb~.pd, 1.4, 1.5 help-lp8_crit~.pd, 1.4, 1.5 help-lp9_butt~.pd, 1.4, 1.5 help-lp9_cheb~.pd, 1.4, 1.5 help-lp9_crit~.pd, 1.4, 1.5 help-maverage~.pd, 1.4, 1.5 help-merge_any.pd, 1.4, 1.5 help-mergefilename.pd, 1.4, 1.5 help-modulo_counter.pd, 1.4, 1.5 help-mp3play~.pd, 1.4, 1.5 help-mull~.pd, 1.4, 1.5 help-once.pd, 1.4, 1.5 help-para_bp2~.pd, 1.4, 1.5 help-peakenv~.pd, 1.4, 1.5 help-pink~.pd, 1.4, 1.5 help-post_netreceive.pd, 1.4, 1.5 help-pp.pd, 1.4, 1.5 help-pre_inlet.pd, 1.4, 1.5 help-pre_netsend.pd, 1.4, 1.5 help-prepend.pd, 1.4, 1.5 help-prepend_ascii.pd, 1.4, 1.5 help-prvu~.pd, 1.4, 1.5 help-pvu~.pd, 1.4, 1.5 help-rbpq2~.pd, 1.4, 1.5 help-rbpw2~.pd, 1.4, 1.5 help-receive2list.pd, 1.4, 1.5 help-rmstofad.pd, 1.4, 1.5 help-round_zero.pd, 1.4, 1.5 help-round~.pd, 1.4, 1.5 help-rvu~.pd, 1.4, 1.5 help-sin_phase~.pd, 1.4, 1.5 help-soundfile_info.pd, 1.4, 1.5 help-speedlim.pd, 1.4, 1.5 help-split.pd, 1.4, 1.5 help-split3.pd, 1.4, 1.5 help-splitfilename.pd, 1.4, 1.5 help-stripfilename.pd, 1.4, 1.5 help-subl~.pd, 1.4, 1.5 help-t3_bpe.pd, 1.4, 1.5 help-t3_delay.pd, 1.4, 1.5 help-t3_line~.pd, 1.4, 1.5 help-t3_metro.pd, 1.4, 1.5 help-t3_sig~.pd, 1.4, 1.5 help-t3_timer.pd, 1.4, 1.5 help-toggle_mess.pd, 1.4, 1.5 help-transf_fader.pd, 1.4, 1.5 help-unsig~.pd, 1.4, 1.5 help-unsymbol.pd, 1.4, 1.5 help-v2db.pd, 1.4, 1.5 help-vcf_bp2~.pd, 1.4, 1.5 help-vcf_bp4~.pd, 1.4, 1.5 help-vcf_bp6~.pd, 1.4, 1.5 help-vcf_bp8~.pd, 1.4, 1.5 help-vcf_hp2~.pd, 1.4, 1.5 help-vcf_hp4~.pd, 1.4, 1.5 help-vcf_hp6~.pd, 1.4, 1.5 help-vcf_hp8~.pd, 1.4, 1.5 help-vcf_lp2~.pd, 1.4, 1.5 help-vcf_lp4~.pd, 1.4, 1.5 help-vcf_lp6~.pd, 1.4, 1.5 help-vcf_lp8~.pd, 1.4, 1.5 help-vcf_rbp2~.pd, 1.4, 1.5 help-vcf_rbp4~.pd, 1.4, 1.5 help-vcf_rbp6~.pd, 1.4, 1.5 help-vcf_rbp8~.pd, 1.4, 1.5 help-wrap.pd, 1.4, 1.5 hslider.pd, 1.4, 1.5 my_canvas.pd, 1.4, 1.5 my_numbox.pd, 1.4, 1.5 popup.pd, 1.4, 1.5 radiobutton.pd, 1.4, 1.5 test_dollarg.pd, 1.4, 1.5 toggle.pd, 1.4, 1.5 vdial.pd, 1.4, 1.5 vslider.pd, 1.4, 1.5 vu.pd, 1.4, 1.5 x_all_guis.pd, 1.4, 1.5
- Next message: [PD-cvs] pd/src x_connective.c,1.3.4.1,1.3.4.1.2.1
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Update of /cvsroot/pure-data/externals/iemlib
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv4625
Modified Files:
CHANGES.txt GnuLGPL.txt INSTALL_win.txt LICENCE.txt
README_win.txt
Added Files:
CONTENT.txt
Log Message:
added files and updated for release-1.16
Index: README_win.txt
===================================================================
RCS file: /cvsroot/pure-data/externals/iemlib/README_win.txt,v
retrieving revision 1.1
retrieving revision 1.2
diff -C2 -d -r1.1 -r1.2
*** README_win.txt 1 Apr 2005 18:11:39 -0000 1.1
--- README_win.txt 2 Jun 2005 18:37:10 -0000 1.2
***************
*** 1,279 ****
! Installation-guide for iemlib under windows (win_xp, win2k, win_me, win_nt or win98)
!
! iemlib_R1.15 is written by Thomas Musil from IEM Graz Austria
! and it is compatible to miller puckette's pd-0.36-0 and pd-0.37-0.
! see also LICENCE.txt, GnuLGPL.txt and README.txt.
!
!
! 1.) download and copy iemlib_R1.15_win.zip into your pd-installation-directory
! ( e.g. C:\Programs\pd\iemlib_R1.15_win.zip )
!
!
! 2.) unzip iemlib_R1.15_win.zip
! winzip create a directory C:\Programs\pd\iemlib_R1.15\
!
!
! 3.) create an externs-directory in your pd-installation-directory (if it does not exist)
! ( e.g. C:\Programs\pd\externs\ )
!
!
! 4.) copy external-libraries
! iemlib contains 4 *.dll-files ( iem_mp3.dll, iem_t3_lib.dll, iemlib1.dll, iemlib2.dll )
! ( e.g. copy C:\Programs\pd\iemlib_R1.15\lib\*.dll --> C:\Programs\pd\externs\ )
!
!
! 5.) copy pd-abstractions-folder
! ( e.g. copy C:\Programs\pd\iemlib_R1.15\iemabs\ --> C:\Programs\pd\iemabs\ )
!
!
! 6.) copy pd-help-files-folder
! ( e.g. copy C:\Programs\pd\iemlib_R1.15\iemhelp\ --> C:\Programs\pd\doc\5.reference\iemhelp\ )
!
!
! 7.) add to your pd36_start.bat the following configuration-options:
! -path C:\Programs\pd\iemabs -path C:\Programs\pd\externs -lib iemlib1:iemlib2:iem_mp3:iem_t3_lib
!
! or create a textfile pd36_start.bat with this content:
!
! @echo off
! set PD_INSTALL=C:\Programme\pd\bin
! set PD_AUDIO=-r 44100 -audiobuf 160
! set PD_MIDI=-nomidi
! set PD_PATH=-path C:/Programme/pd/iemabs -path C:/Programme/pd/externs
! set PD_LIB=-lib iemlib1 -lib iemlib2 -lib iem_mp3 -lib iem_t3_lib
! @echo starting pd ...
! %PD_INSTALL%\pd %PD_AUDIO% %PD_MIDI% %PD_PATH% %PD_LIB%
!
!
!
! How to compile iemlib under windows
!
! after installing iemlib and if You are owner of a VCC++ compiler:
!
! 8.a) edit makefile_win of iemlib1
! change to directory C:\Programs\pd\iemlib_R1.15\iemlib1
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 8.b) compile iemlib1
! doubleclick iemlib1.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iemlib1.dll will be created in C:\Programs\pd\iemlib_R1.15\lib ).
!
! 9.a) edit makefile_win of iemlib2
! change to directory C:\Programs\pd\iemlib_R1.15\iemlib2
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 9.b) compile iemlib2
! doubleclick iemlib2.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iemlib2.dll will be created in C:\Programs\pd\iemlib_R1.15\lib ).
!
! 10.a) edit makefile_win of iem_mp3
! change to directory C:\Programs\pd\iemlib_R1.15\iem_mp3
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 10.b) compile iem_mp3
! doubleclick iem_mp3.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iem_mp3.dll will be created in C:\Programs\pd\iemlib_R1.15\lib ).
!
! 11.a) edit makefile_win of iem_t3_lib
! change to directory C:\Programs\pd\iemlib_R1.15\iem_t3_lib
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 11.b) compile iem_t3_lib
! doubleclick iem_t3_lib.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iem_t3_lib.dll will be created in C:\Programs\pd\iemlib_R1.15\lib ).
!
! 12.) copy external-libraries
! change to C:\Programs\pd\iemlib_R1.15\lib\
! ( e.g. copy C:\Programs\pd\iemlib_R1.15\lib\*.dll --> C:\Programs\pd\externs\ )
!
!
!
!
! contents of iemlib Release 1.15 from December 2003
!
! ============================ DSP~ ===============================
!
! ------------------------- filter~ -------------------------------
! FIR~ finite impuls response filter, with array-coefficients
!
! maverage~ moving average filter, (IIR + delay)
!
! ap1~ allpass 1.order
! ap2~ allpass 2.order
! bpq2~ bandpass 2.order with Q-inlet
! bpw2~ bandpass 2.order with bandwidth-inlet
! bsq2~ bandstop 2.order (notch) with Q-inlet
! bsw2~ bandstop 2.order (notch) with bandwidth-inlet
! hp1~ highpass 1.order
! hp2~ highpass 2.order
! lp1~ lowpass 1.order
! lp2~ lowpass 2.order
! rbpq2~ resonance-bandpass 2.order with Q-inlet
! rbpw2~ resonance-bandpass 2.order with bandwidth-inlet
!
! hml_shelf~ high-middle-low shelving-filter with freq- and gain-inlets
! lp1_t~ lowpass 1.order with time_constant inlet
! para_bp2~ parametrical bandpass 2. order with freq-, Q- and gain-inlet
!
! hp2_butt~, hp3_butt~, hp4_butt~, hp5_butt~, hp6_butt~, hp7_butt~,
! hp8_butt~, hp9_butt~, hp10_butt~
! highpass 2.3.4.5.6.7.8.9.10.order with butterworth characteristic
! hp2_cheb~, hp3_cheb~, hp4_cheb~, hp5_cheb~, hp6_cheb~, hp7_cheb~,
! hp8_cheb~, hp9_cheb~, hp10_cheb~
! highpass 2.3.4.5.6.7.8.9.10.order with chebyshev characteristic
! hp2_bess~, hp3_bess~, hp4_bess~, hp5_bess~, hp6_bess~, hp7_bess~,
! hp8_bess~, hp9_bess~, hp10_bess~
! highpass 2.3.4.5.6.7.8.9.10.order with bessel characteristic
! hp2_crit~, hp3_crit~, hp4_crit~, hp5_crit~, hp6_crit~, hp7_crit~,
! hp8_crit~, hp9_crit~, hp10_crit~
! highpass 2.3.4.5.6.7.8.9.10.order with critical damping
! lp2_butt~, lp3_butt~, lp4_butt~, lp5_butt~, lp6_butt~, lp7_butt~,
! lp8_butt~, lp9_butt~, lp10_butt~
! lowpass 2.3.4.5.6.7.8.9.10.order with butterworth characteristic
! lp2_cheb~, lp3_cheb~, lp4_cheb~, lp5_cheb~, lp6_cheb~, lp7_cheb~,
! lp8_cheb~, lp9_cheb~, lp10_cheb~
! lowpass 2.3.4.5.6.7.8.9.10.order with chebyshev characteristic
! lp2_bess~, lp3_bess~, lp4_bess~, lp5_bess~, lp6_bess~, lp7_bess~,
! lp8_bess~, lp9_bess~, lp10_bess~
! lowpass 2.3.4.5.6.7.8.9.10.order with bessel characteristic
! lp2_crit~, lp3_crit~, lp4_crit~, lp5_crit~, lp6_crit~, lp7_crit~,
! lp8_crit~, lp9_crit~, lp10_crit~
! lowpass 2.3.4.5.6.7.8.9.10.order with critical damping
!
! vcf_hp2~, vcf_hp4~, vcf_hp6~, vcf_hp8~
! highpass 2.4.6.8.order with freq- and Q-signal-inlets
! vcf_lp2~, vcf_lp4~, vcf_lp6~, vcf_lp8~
! lowpass 2.4.6.8.order with freq- and Q-signal-inlets
! vcf_bp2~, vcf_bp4~, vcf_bp6~, vcf_bp8~
! bandpass 2.4.6.8.order with freq- and Q-signal-inlets
! vcf_rbp2~, vcf_rbp4~, vcf_rbp6~, vcf_rbp8~
! resonance-bandpass 2.4.6.8.order with freq- and Q-signal-inlets
!
! ------------------------ arithmetic~ ----------------------------
! addl~ signal-addition with line~
! divl~ signal-divison with line~
! mull~ signal-multiplication with line~
! subl~ signal-subtraction with line~
!
! ------------------------- converter~ ----------------------------
! prvu~ peak and rms VU-meter interface
! pvu~ peak VU-meter interface
! rvu~ rms VU-meter interface
! unsig~ signal to float converter
!
! ------------------ t3~ - time-tagged-trigger --------------------
! -- inputmessages allow a sample-accurate access to signalshape --
! t3_sig~ time tagged trigger sig~
! t3_line~ time tagged trigger line~
!
! --------------------------- misc~ -------------------------------
! fade~ fade-in fade-out shaper (need line~)
! iem_blocksize~ blocksize of a window in samples
! iem_samplerate~ samplerate of a window in Hertz
! int_fract~ split signal-float to integer- and fractal-part
! LFO_noise~ downsampled 2-point interpolated white noise
! mp3play~ mp3 stereo player
! peakenv~ peak envelope shaper
! pink~ pink noise
! round~ round signal-float to nearest integer
! sin_phase~ output phase-difference of 2 sinewaves in samples
!
! ========================= control ==============================
!
! ------------- gui (included into millers pd) --------------------
!
! bng bang, display and generate a bang-message
! cnv canvas, colored background and text
! hdl horizontal dial, for multiplex usage
! hradio horizontal radiobutton, only float in/out
! hsl horizontal slider
! nbx numberbox, the second
! tgl 2 state toggle
! vdl vertical dial, for multiplex usage
! vradio vertical radiobutton, only float in/out
! vsl vertical slider
! vu vu-meter, display rms- + peak-level in dB
!
! --------------------- float operating -------------------------
! 1p1z float-message-filter 1.order
! db2v db to rms
! dbtofad midi-db to fader-characteristic
! fadtodb fader-characteristic to midi-db
! fadtorms fader-characteristic to rms
! rmstofad rms to fader-characteristic
! round_zero round numbers near zero to zero
! speedlim reduce speed of a numeric stream
! split3 part a numeric stream into 3 ways
! split part a numeric stream into 2 ways (like moses)
! transf_fader partial linear characteristic diagram (like table)
! v2db rms to db
! wrap wraparound
!
! -------------------- symbol operating -------------------------
! mergefilename merge a list of symbols together
! splitfilename divide a symbol into 2 parts
! stripfilename strip n characters of a symbol
! unsymbol convert a symbol- to a anything-message
!
! ------------------- anything operating ------------------------
! any store and recall any message (like f, or symbol)
! iem_append append a message to any messages (obsolete: merge_any)
! iem_prepend prepend a message to any messages (abbr. pp or prepend)
!
! -------------------------- init -------------------------------
! default replace initial-argument, if it is zero
! dollarg receive parent initial-arguments (abbr. $n)
! dsp control audio-engine, calculate dsp-performance (aka. dsp~)
! float24 store a 24-bit accurate float-number
! init initialize a message via loadbang (abbr. ii)
! once any message pass through only the first time
!
! ------------------------- counter -----------------------------
! exp_inc exponential increment counter (bang triggered)
! for++ incremental counter (triggered by internal metro)
! modulo_counter endless loop counter (bang triggered)
!
! -------------------------- misc -------------------------------
! add2_comma add a comma-separated message to a messagebox
! bpe break point envelope controller
! f2note frequency to midi+cents+note
! gate interruptible message connection (like spigot)
! iem_i_route variation of route (abbr. iiroute)
! iem_receive catch "sent" messages (receive-name-input) (abbr. iem_r)
! iem_route improvement of route
! iem_sel_any control a message-box with multiple content
! iem_send send messages to named object (send-name-input)(ab. iem_s)
! pre_inlet output an identifier-message and then the incoming message
! prepend_ascii output an identifier-message and then the incoming message
! soundfile_info output header-info of a wav-file
! toggle_mess control a message-box with multiple content (abbr. tm)
!
! ------------------- parameter handling ------------------------
! iem_pbank_csv parameter memory manager (csv-format) (like textfile)
! list2send array of send-objects
! receive2list array of receive-objects
!
! --------------- t3 - time-tagged-trigger ---------------------
! ----------- a time-tag is prepended to each message -----------
! ----- so these objects allow a sample-accurate access to ------
! ---------- the signal-objects t3_sig~ and t3_line~ ------------
! t3_bpe time tagged trigger break point envelope
! t3_delay time tagged trigger delay
! t3_metro time tagged trigger metronom
! t3_timer time tagged trigger timer
!
! -------------- obsolete ---------------------------------------
! post_netreceive
! pre_netsend
--- 1,271 ----
! Installation-guide for iemlib under windows (win_xp, win2k, win_me, win_nt or win98)
!
! iemlib_R1.16 is written by Thomas Musil from IEM Graz Austria
! and it is compatible to miller puckette's pd-0.36-0 to pd-0.37-3.
! see also LICENCE.txt, GnuLGPL.txt and README.txt.
!
!
! 1.) download and copy iemlib_R1.16_win.zip into your pd-installation-directory
! ( e.g. C:\Programs\pd\iemlib_R1.16_win.zip )
!
!
! 2.) unzip iemlib_R1.16_win.zip
! winzip create a directory C:\Programs\pd\iemlib_R1.16\
!
!
! 3.) copy external-libraries
! iemlib contains 4 *.dll-files ( iem_mp3.dll, iem_t3_lib.dll, iemlib1.dll, iemlib2.dll )
! ( e.g. copy C:\Programs\pd\iemlib_R1.16\lib\*.dll --> C:\Programs\pd\extra\ )
!
!
! 4.) copy pd-help-files-folder
! ( e.g. copy C:\Programs\pd\iemlib_R1.16\iemhelp\ --> C:\Programs\pd\doc\5.reference\iemhelp\ )
!
!
! 5.) add to your pd37_start.bat the following configuration-options:
! -path C:\Programs\pd\iemlib_R1.16\iemabs -lib iemlib1 -lib iemlib2 -lib iem_mp3 -lib iem_t3_lib
!
! or create a textfile pd37_start.bat with this content:
!
! @echo off
! set PD_INSTALL=C:\Programme\pd\bin
! set PD_AUDIO=-r 44100 -audiobuf 160
! set PD_MIDI=-nomidi
! set PD_PATH=-path C:/Programme/pd/iemlib_R1.16\iemabs
! set PD_LIB=-lib iemlib1 -lib iemlib2 -lib iem_mp3 -lib iem_t3_lib
! @echo starting pd ...
! %PD_INSTALL%\pd %PD_AUDIO% %PD_MIDI% %PD_PATH% %PD_LIB%
!
!
!
! How to compile iemlib under windows
!
! after installing iemlib and if You are owner of a VCC++ compiler:
!
! 6.a) edit makefile_win of iemlib1
! change to directory C:\Programs\pd\iemlib_R1.16\iemlib1
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 6.b) compile iemlib1
! doubleclick iemlib1.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iemlib1.dll will be created in C:\Programs\pd\iemlib_R1.16\lib ).
!
! 7.a) edit makefile_win of iemlib2
! change to directory C:\Programs\pd\iemlib_R1.16\iemlib2
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 7.b) compile iemlib2
! doubleclick iemlib2.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iemlib2.dll will be created in C:\Programs\pd\iemlib_R1.16\lib ).
!
! 8.a) edit makefile_win of iem_mp3
! change to directory C:\Programs\pd\iemlib_R1.16\iem_mp3
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 8.b) compile iem_mp3
! doubleclick iem_mp3.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iem_mp3.dll will be created in C:\Programs\pd\iemlib_R1.16\lib ).
!
! 9.a) edit makefile_win of iem_t3_lib
! change to directory C:\Programs\pd\iemlib_R1.16\iem_t3_lib
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 9.b) compile iem_t3_lib
! doubleclick iem_t3_lib.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iem_t3_lib.dll will be created in C:\Programs\pd\iemlib_R1.16\lib ).
!
! 10.) copy external-libraries
! change to C:\Programs\pd\iemlib_R1.16\lib\
! ( e.g. copy C:\Programs\pd\iemlib_R1.16\lib\*.dll --> C:\Programs\pd\extra\ )
!
!
!
!
! contents of iemlib Release 1.16 from August 2004
!
! ============================ DSP~ ===============================
!
! ------------------------- filter~ -------------------------------
! FIR~ finite impuls response filter, with array-coefficients
!
! maverage~ moving average filter, (IIR + delay)
!
! ap1~ allpass 1.order
! ap2~ allpass 2.order
! bpq2~ bandpass 2.order with Q-inlet
! bpw2~ bandpass 2.order with bandwidth-inlet
! bsq2~ bandstop 2.order (notch) with Q-inlet
! bsw2~ bandstop 2.order (notch) with bandwidth-inlet
! hp1~ highpass 1.order
! hp2~ highpass 2.order
! lp1~ lowpass 1.order
! lp2~ lowpass 2.order
! rbpq2~ resonance-bandpass 2.order with Q-inlet
! rbpw2~ resonance-bandpass 2.order with bandwidth-inlet
!
! hml_shelf~ high-middle-low shelving-filter with freq- and gain-inlets
! lp1_t~ lowpass 1.order with time_constant inlet
! para_bp2~ parametrical bandpass 2. order with freq-, Q- and gain-inlet
!
! hp2_butt~, hp3_butt~, hp4_butt~, hp5_butt~, hp6_butt~, hp7_butt~,
! hp8_butt~, hp9_butt~, hp10_butt~
! highpass 2.3.4.5.6.7.8.9.10.order with butterworth characteristic
! hp2_cheb~, hp3_cheb~, hp4_cheb~, hp5_cheb~, hp6_cheb~, hp7_cheb~,
! hp8_cheb~, hp9_cheb~, hp10_cheb~
! highpass 2.3.4.5.6.7.8.9.10.order with chebyshev characteristic
! hp2_bess~, hp3_bess~, hp4_bess~, hp5_bess~, hp6_bess~, hp7_bess~,
! hp8_bess~, hp9_bess~, hp10_bess~
! highpass 2.3.4.5.6.7.8.9.10.order with bessel characteristic
! hp2_crit~, hp3_crit~, hp4_crit~, hp5_crit~, hp6_crit~, hp7_crit~,
! hp8_crit~, hp9_crit~, hp10_crit~
! highpass 2.3.4.5.6.7.8.9.10.order with critical damping
! lp2_butt~, lp3_butt~, lp4_butt~, lp5_butt~, lp6_butt~, lp7_butt~,
! lp8_butt~, lp9_butt~, lp10_butt~
! lowpass 2.3.4.5.6.7.8.9.10.order with butterworth characteristic
! lp2_cheb~, lp3_cheb~, lp4_cheb~, lp5_cheb~, lp6_cheb~, lp7_cheb~,
! lp8_cheb~, lp9_cheb~, lp10_cheb~
! lowpass 2.3.4.5.6.7.8.9.10.order with chebyshev characteristic
! lp2_bess~, lp3_bess~, lp4_bess~, lp5_bess~, lp6_bess~, lp7_bess~,
! lp8_bess~, lp9_bess~, lp10_bess~
! lowpass 2.3.4.5.6.7.8.9.10.order with bessel characteristic
! lp2_crit~, lp3_crit~, lp4_crit~, lp5_crit~, lp6_crit~, lp7_crit~,
! lp8_crit~, lp9_crit~, lp10_crit~
! lowpass 2.3.4.5.6.7.8.9.10.order with critical damping
!
! vcf_hp2~, vcf_hp4~, vcf_hp6~, vcf_hp8~
! highpass 2.4.6.8.order with freq- and Q-signal-inlets
! vcf_lp2~, vcf_lp4~, vcf_lp6~, vcf_lp8~
! lowpass 2.4.6.8.order with freq- and Q-signal-inlets
! vcf_bp2~, vcf_bp4~, vcf_bp6~, vcf_bp8~
! bandpass 2.4.6.8.order with freq- and Q-signal-inlets
! vcf_rbp2~, vcf_rbp4~, vcf_rbp6~, vcf_rbp8~
! resonance-bandpass 2.4.6.8.order with freq- and Q-signal-inlets
!
! ------------------------ arithmetic~ ----------------------------
! addl~ signal-addition with line~
! divl~ signal-divison with line~
! mull~ signal-multiplication with line~
! subl~ signal-subtraction with line~
!
! ------------------------- converter~ ----------------------------
! prvu~ peak and rms VU-meter interface
! pvu~ peak VU-meter interface
! rvu~ rms VU-meter interface
! unsig~ signal to float converter
!
! ------------------ t3~ - time-tagged-trigger --------------------
! -- inputmessages allow a sample-accurate access to signalshape --
! t3_sig~ time tagged trigger sig~
! t3_line~ time tagged trigger line~
!
! --------------------------- misc~ -------------------------------
! fade~ fade-in fade-out shaper (need line~)
! iem_blocksize~ blocksize of a window in samples
! iem_samplerate~ samplerate of a window in Hertz
! int_fract~ split signal-float to integer- and fractal-part
! LFO_noise~ downsampled 2-point interpolated white noise
! mp3play~ mp3 stereo player
! peakenv~ peak envelope shaper
! pink~ pink noise
! round~ round signal-float to nearest integer
! sin_phase~ output phase-difference of 2 sinewaves in samples
!
! ========================= control ==============================
!
! ------------- gui (included into millers pd) --------------------
!
! bng bang, display and generate a bang-message
! cnv canvas, colored background and text
! hdl horizontal dial, for multiplex usage
! hradio horizontal radiobutton, only float in/out
! hsl horizontal slider
! nbx numberbox, the second
! tgl 2 state toggle
! vdl vertical dial, for multiplex usage
! vradio vertical radiobutton, only float in/out
! vsl vertical slider
! vu vu-meter, display rms- + peak-level in dB
!
! --------------------- float operating -------------------------
! 1p1z float-message-filter 1.order
! db2v db to rms
! dbtofad midi-db to fader-characteristic
! fadtodb fader-characteristic to midi-db
! fadtorms fader-characteristic to rms
! rmstofad rms to fader-characteristic
! round_zero round numbers near zero to zero
! speedlim reduce speed of a numeric stream
! split3 part a numeric stream into 3 ways
! split part a numeric stream into 2 ways (like moses)
! transf_fader partial linear characteristic diagram (like table)
! v2db rms to db
! wrap wraparound
!
! -------------------- symbol operating -------------------------
! mergefilename merge a list of symbols together
! splitfilename divide a symbol into 2 parts
! stripfilename strip n characters of a symbol
! unsymbol convert a symbol- to a anything-message
!
! ------------------- anything operating ------------------------
! any store and recall any message (like f, or symbol)
! iem_append append a message to any messages (obsolete: merge_any)
! iem_prepend prepend a message to any messages (abbr. pp or prepend)
!
! -------------------------- init -------------------------------
! default replace initial-argument, if it is zero
! dollarg receive parent initial-arguments (abbr. $n)
! dsp control audio-engine, calculate dsp-performance (aka. dsp~)
! float24 store a 24-bit accurate float-number
! init initialize a message via loadbang (abbr. ii)
! once any message pass through only the first time
!
! ------------------------- counter -----------------------------
! exp_inc exponential increment counter (bang triggered)
! for++ incremental counter (triggered by internal metro)
! modulo_counter endless loop counter (bang triggered)
!
! -------------------------- misc -------------------------------
! add2_comma add a comma-separated message to a messagebox
! bpe break point envelope controller
! f2note frequency to midi+cents+note
! gate interruptible message connection (like spigot)
! iem_i_route variation of route (abbr. iiroute)
! iem_receive catch "sent" messages (receive-name-input) (abbr. iem_r)
! iem_route improvement of route
! iem_sel_any control a message-box with multiple content
! iem_send send messages to named object (send-name-input)(ab. iem_s)
! pre_inlet output an identifier-message and then the incoming message
! prepend_ascii output an identifier-message and then the incoming message
! soundfile_info output header-info of a wav-file
! toggle_mess control a message-box with multiple content (abbr. tm)
!
! ------------------- parameter handling ------------------------
! iem_pbank_csv parameter memory manager (csv-format) (like textfile)
! list2send array of send-objects
! receive2list array of receive-objects
!
! --------------- t3 - time-tagged-trigger ---------------------
! ----------- a time-tag is prepended to each message -----------
! ----- so these objects allow a sample-accurate access to ------
! ---------- the signal-objects t3_sig~ and t3_line~ ------------
! t3_bpe time tagged trigger break point envelope
! t3_delay time tagged trigger delay
! t3_metro time tagged trigger metronom
! t3_timer time tagged trigger timer
!
! -------------- obsolete ---------------------------------------
! post_netreceive
! pre_netsend
Index: CHANGES.txt
===================================================================
RCS file: /cvsroot/pure-data/externals/iemlib/CHANGES.txt,v
retrieving revision 1.1.1.1
retrieving revision 1.2
diff -C2 -d -r1.1.1.1 -r1.2
*** CHANGES.txt 18 May 2004 21:32:40 -0000 1.1.1.1
--- CHANGES.txt 2 Jun 2005 18:37:10 -0000 1.2
***************
*** 1,64 ****
! iemlib Release 1.15:
!
!
! improvements:
!
! all signal-filters are more stable
! speedlim lost its change-characteristic
! iem_pbank_csv lost its 3.arg, but got a buffer and more
! recall-options
!
!
!
! new:
!
! more high-order IIR-filters
! (odd order 3. 5. 7. 9.)
! (critical damping and bessel-characteristic)
!
! more VCFs with signal-parameters
! (vcf_hp~, vcf_bp~, vcf_rbp~)
!
! addl~ signal-addition with line~
! divl~ signal-divison with line~
! mull~ signal-multiplication with line~
! subl~ signal-subtraction with line~
! rvu~ rms VU-meter interface
! iem_blocksize~ blocksize of a window in samples
! iem_samplerate~ samplerate of a window in Hertz
! int_fract~ split signal-float to integer- and fractal-part
! round~ round signal-float to nearest integer
! sin_phase~ output phase-difference of 2 sinewaves in samples
! 1p1z float-message-filter 1.order
! dbtofad midi-db to fader-characteristic
! fadtodb fader-characteristic to midi-db
! fadtorms fader-characteristic to rms
! rmstofad rms to fader-characteristic
! round_zero round numbers near zero to zero
! transf_fader partial linear characteristic diagram (like table)
! wrap wraparound
! default replace initial-argument, if it is zero
! float24 store a 24-bit accurate float-number
! once any message pass through only the first time
! add2_comma add a comma-separated message to a messagebox
! iem_receive catch "sent" messages (receive-name-input) (abbr. iem_r)
! iem_sel_any control a message-box with multiple content
! iem_send send messages to named object (send-name-input)(ab. iem_s)
! pre_inlet output an identifier-message and then the incoming message
! soundfile_info output header-info of a wav-file
!
!
!
! name-changes (but compatible aliases):
!
! merge_any -> iem_append
! prepend -> iem_prepend
!
!
!
! incompatible changes:
!
! post_netreceive -> list2send array of send-objects
! pre_netsend -> receive2list array of receive-objects
!
!
--- 1,80 ----
! ************************************************************
! iemlib Release 1.16:
! ____________________________________________________________
! improvements:
!
! the linux-compile-bugs are fixed.
!
! any, iem_anything, iem_append, merge_any,
! pp, iem_prepend, prepend,
! iem_send, iem_s, receive2list,
! iem_receive, iem_r
! are abstractions using kernel-externals.
! You cannot open these abstractions now.
!
!
! ************************************************************
! iemlib Release 1.15:
! ____________________________________________________________
!
! improvements:
!
! all signal-filters are more stable
! speedlim lost its change-characteristic
! iem_pbank_csv lost its 3.arg, but got a buffer and more
! recall-options
!
!
!
! new:
!
! more high-order IIR-filters
! (odd order 3. 5. 7. 9.)
! (critical damping and bessel-characteristic)
!
! more VCFs with signal-parameters
! (vcf_hp~, vcf_bp~, vcf_rbp~)
!
! addl~ signal-addition with line~
! divl~ signal-divison with line~
! mull~ signal-multiplication with line~
! subl~ signal-subtraction with line~
! rvu~ rms VU-meter interface
! iem_blocksize~ blocksize of a window in samples
! iem_samplerate~ samplerate of a window in Hertz
! int_fract~ split signal-float to integer- and fractal-part
! round~ round signal-float to nearest integer
! sin_phase~ output phase-difference of 2 sinewaves in samples
! 1p1z float-message-filter 1.order
! dbtofad midi-db to fader-characteristic
! fadtodb fader-characteristic to midi-db
! fadtorms fader-characteristic to rms
! rmstofad rms to fader-characteristic
! round_zero round numbers near zero to zero
! transf_fader partial linear characteristic diagram (like table)
! wrap wraparound
! default replace initial-argument, if it is zero
! float24 store a 24-bit accurate float-number
! once any message pass through only the first time
! add2_comma add a comma-separated message to a messagebox
! iem_receive catch "sent" messages (receive-name-input) (abbr. iem_r)
! iem_sel_any control a message-box with multiple content
! iem_send send messages to named object (send-name-input)(ab. iem_s)
! pre_inlet output an identifier-message and then the incoming message
! soundfile_info output header-info of a wav-file
!
!
!
! name-changes (but compatible aliases):
!
! merge_any -> iem_append
! prepend -> iem_prepend
!
!
!
! incompatible changes:
!
! post_netreceive -> list2send array of send-objects
! pre_netsend -> receive2list array of receive-objects
!
!
--- NEW FILE: CONTENT.txt ---
contents of iemlib Release 1.16 from August 2004
============================ DSP~ ===============================
------------------------- filter~ -------------------------------
FIR~ finite impuls response filter, with array-coefficients
maverage~ moving average filter, (IIR + delay)
ap1~ allpass 1.order
ap2~ allpass 2.order
bpq2~ bandpass 2.order with Q-inlet
bpw2~ bandpass 2.order with bandwidth-inlet
bsq2~ bandstop 2.order (notch) with Q-inlet
bsw2~ bandstop 2.order (notch) with bandwidth-inlet
hp1~ highpass 1.order
hp2~ highpass 2.order
lp1~ lowpass 1.order
lp2~ lowpass 2.order
rbpq2~ resonance-bandpass 2.order with Q-inlet
rbpw2~ resonance-bandpass 2.order with bandwidth-inlet
hml_shelf~ high-middle-low shelving-filter with freq- and gain-inlets
lp1_t~ lowpass 1.order with time_constant inlet
para_bp2~ parametrical bandpass 2. order with freq-, Q- and gain-inlet
hp2_butt~, hp3_butt~, hp4_butt~, hp5_butt~, hp6_butt~, hp7_butt~,
hp8_butt~, hp9_butt~, hp10_butt~
highpass 2.3.4.5.6.7.8.9.10.order with butterworth characteristic
hp2_cheb~, hp3_cheb~, hp4_cheb~, hp5_cheb~, hp6_cheb~, hp7_cheb~,
hp8_cheb~, hp9_cheb~, hp10_cheb~
highpass 2.3.4.5.6.7.8.9.10.order with chebyshev characteristic
hp2_bess~, hp3_bess~, hp4_bess~, hp5_bess~, hp6_bess~, hp7_bess~,
hp8_bess~, hp9_bess~, hp10_bess~
highpass 2.3.4.5.6.7.8.9.10.order with bessel characteristic
hp2_crit~, hp3_crit~, hp4_crit~, hp5_crit~, hp6_crit~, hp7_crit~,
hp8_crit~, hp9_crit~, hp10_crit~
highpass 2.3.4.5.6.7.8.9.10.order with critical damping
lp2_butt~, lp3_butt~, lp4_butt~, lp5_butt~, lp6_butt~, lp7_butt~,
lp8_butt~, lp9_butt~, lp10_butt~
lowpass 2.3.4.5.6.7.8.9.10.order with butterworth characteristic
lp2_cheb~, lp3_cheb~, lp4_cheb~, lp5_cheb~, lp6_cheb~, lp7_cheb~,
lp8_cheb~, lp9_cheb~, lp10_cheb~
lowpass 2.3.4.5.6.7.8.9.10.order with chebyshev characteristic
lp2_bess~, lp3_bess~, lp4_bess~, lp5_bess~, lp6_bess~, lp7_bess~,
lp8_bess~, lp9_bess~, lp10_bess~
lowpass 2.3.4.5.6.7.8.9.10.order with bessel characteristic
lp2_crit~, lp3_crit~, lp4_crit~, lp5_crit~, lp6_crit~, lp7_crit~,
lp8_crit~, lp9_crit~, lp10_crit~
lowpass 2.3.4.5.6.7.8.9.10.order with critical damping
vcf_hp2~, vcf_hp4~, vcf_hp6~, vcf_hp8~
highpass 2.4.6.8.order with freq- and Q-signal-inlets
vcf_lp2~, vcf_lp4~, vcf_lp6~, vcf_lp8~
lowpass 2.4.6.8.order with freq- and Q-signal-inlets
vcf_bp2~, vcf_bp4~, vcf_bp6~, vcf_bp8~
bandpass 2.4.6.8.order with freq- and Q-signal-inlets
vcf_rbp2~, vcf_rbp4~, vcf_rbp6~, vcf_rbp8~
resonance-bandpass 2.4.6.8.order with freq- and Q-signal-inlets
------------------------ arithmetic~ ----------------------------
addl~ signal-addition with line~
divl~ signal-divison with line~
mull~ signal-multiplication with line~
subl~ signal-subtraction with line~
------------------------- converter~ ----------------------------
prvu~ peak and rms VU-meter interface
pvu~ peak VU-meter interface
rvu~ rms VU-meter interface
unsig~ signal to float converter
------------------ t3~ - time-tagged-trigger --------------------
-- inputmessages allow a sample-accurate access to signalshape --
t3_sig~ time tagged trigger sig~
t3_line~ time tagged trigger line~
--------------------------- misc~ -------------------------------
fade~ fade-in fade-out shaper (need line~)
iem_blocksize~ blocksize of a window in samples
iem_samplerate~ samplerate of a window in Hertz
int_fract~ split signal-float to integer- and fractal-part
LFO_noise~ downsampled 2-point interpolated white noise
mp3play~ mp3 stereo player
peakenv~ peak envelope shaper
pink~ pink noise
round~ round signal-float to nearest integer
sin_phase~ output phase-difference of 2 sinewaves in samples
========================= control ==============================
------------- gui (included into millers pd) --------------------
bng bang, display and generate a bang-message
cnv canvas, colored background and text
hdl horizontal dial, for multiplex usage
hradio horizontal radiobutton, only float in/out
hsl horizontal slider
nbx numberbox, the second
tgl 2 state toggle
vdl vertical dial, for multiplex usage
vradio vertical radiobutton, only float in/out
vsl vertical slider
vu vu-meter, display rms- + peak-level in dB
--------------------- float operating -------------------------
1p1z float-message-filter 1.order
db2v db to rms
dbtofad midi-db to fader-characteristic
fadtodb fader-characteristic to midi-db
fadtorms fader-characteristic to rms
rmstofad rms to fader-characteristic
round_zero round numbers near zero to zero
speedlim reduce speed of a numeric stream
split3 part a numeric stream into 3 ways
split part a numeric stream into 2 ways (like moses)
transf_fader partial linear characteristic diagram (like table)
v2db rms to db
wrap wraparound
-------------------- symbol operating -------------------------
mergefilename merge a list of symbols together
splitfilename divide a symbol into 2 parts
stripfilename strip n characters of a symbol
unsymbol convert a symbol- to a anything-message
------------------- anything operating ------------------------
any store and recall any message (like f, or symbol)
iem_append append a message to any messages (obsolete: merge_any)
iem_prepend prepend a message to any messages (abbr. pp or prepend)
-------------------------- init -------------------------------
default replace initial-argument, if it is zero
dollarg receive parent initial-arguments (abbr. $n)
dsp control audio-engine, calculate dsp-performance (aka. dsp~)
float24 store a 24-bit accurate float-number
init initialize a message via loadbang (abbr. ii)
once any message pass through only the first time
------------------------- counter -----------------------------
exp_inc exponential increment counter (bang triggered)
for++ incremental counter (triggered by internal metro)
modulo_counter endless loop counter (bang triggered)
-------------------------- misc -------------------------------
add2_comma add a comma-separated message to a messagebox
bpe break point envelope controller
f2note frequency to midi+cents+note
gate interruptible message connection (like spigot)
iem_i_route variation of route (abbr. iiroute)
iem_receive catch "sent" messages (receive-name-input) (abbr. iem_r)
iem_route improvement of route
iem_sel_any control a message-box with multiple content
iem_send send messages to named object (send-name-input)(ab. iem_s)
pre_inlet output an identifier-message and then the incoming message
prepend_ascii output an identifier-message and then the incoming message
soundfile_info output header-info of a wav-file
toggle_mess control a message-box with multiple content (abbr. tm)
------------------- parameter handling ------------------------
iem_pbank_csv parameter memory manager (csv-format) (like textfile)
list2send array of send-objects
receive2list array of receive-objects
--------------- t3 - time-tagged-trigger ---------------------
----------- a time-tag is prepended to each message -----------
----- so these objects allow a sample-accurate access to ------
---------- the signal-objects t3_sig~ and t3_line~ ------------
t3_bpe time tagged trigger break point envelope
t3_delay time tagged trigger delay
t3_metro time tagged trigger metronom
t3_timer time tagged trigger timer
-------------- obsolete ---------------------------------------
post_netreceive
pre_netsend
Index: INSTALL_win.txt
===================================================================
RCS file: /cvsroot/pure-data/externals/iemlib/INSTALL_win.txt,v
retrieving revision 1.1
retrieving revision 1.2
diff -C2 -d -r1.1 -r1.2
*** INSTALL_win.txt 1 Apr 2005 18:11:38 -0000 1.1
--- INSTALL_win.txt 2 Jun 2005 18:37:10 -0000 1.2
***************
*** 1,99 ****
! Installation-guide for iemlib under windows (win_xp, win2k, win_me, win_nt or win98)
!
! iemlib_R1.15 is written by Thomas Musil from IEM Graz Austria
! and it is compatible to miller puckette's pd-0.36-0 and pd-0.37-0.
! see also LICENCE.txt, GnuLGPL.txt and README.txt.
!
!
! 1.) download and copy iemlib_R1.15_win.zip into your pd-installation-directory
! ( e.g. C:\Programs\pd\iemlib_R1.15_win.zip )
!
!
! 2.) unzip iemlib_R1.15_win.zip
! winzip create a directory C:\Programs\pd\iemlib_R1.15\
!
!
! 3.) create an externs-directory in your pd-installation-directory (if it does not exist)
! ( e.g. C:\Programs\pd\externs\ )
!
!
! 4.) copy external-libraries
! iemlib contains 4 *.dll-files ( iem_mp3.dll, iem_t3_lib.dll, iemlib1.dll, iemlib2.dll )
! ( e.g. copy C:\Programs\pd\iemlib_R1.15\lib\*.dll --> C:\Programs\pd\externs\ )
!
!
! 5.) copy pd-abstractions-folder
! ( e.g. copy C:\Programs\pd\iemlib_R1.15\iemabs\ --> C:\Programs\pd\iemabs\ )
!
!
! 6.) copy pd-help-files-folder
! ( e.g. copy C:\Programs\pd\iemlib_R1.15\iemhelp\ --> C:\Programs\pd\doc\5.reference\iemhelp\ )
!
!
! 7.) add to your pd36_start.bat the following configuration-options:
! -path C:\Programs\pd\iemabs -path C:\Programs\pd\externs -lib iemlib1:iemlib2:iem_mp3:iem_t3_lib
!
! or create a textfile pd36_start.bat with this content:
!
! @echo off
! set PD_INSTALL=C:\Programme\pd\bin
! set PD_AUDIO=-r 44100 -audiobuf 160
! set PD_MIDI=-nomidi
! set PD_PATH=-path C:/Programme/pd/iemabs -path C:/Programme/pd/externs
! set PD_LIB=-lib iemlib1 -lib iemlib2 -lib iem_mp3 -lib iem_t3_lib
! @echo starting pd ...
! %PD_INSTALL%\pd %PD_AUDIO% %PD_MIDI% %PD_PATH% %PD_LIB%
!
!
!
! How to compile iemlib under windows
!
! after installing iemlib and if You are owner of a VCC++ compiler:
!
! 8.a) edit makefile_win of iemlib1
! change to directory C:\Programs\pd\iemlib_R1.15\iemlib1
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 8.b) compile iemlib1
! doubleclick iemlib1.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iemlib1.dll will be created in C:\Programs\pd\iemlib_R1.15\lib ).
!
! 9.a) edit makefile_win of iemlib2
! change to directory C:\Programs\pd\iemlib_R1.15\iemlib2
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 9.b) compile iemlib2
! doubleclick iemlib2.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iemlib2.dll will be created in C:\Programs\pd\iemlib_R1.15\lib ).
!
! 10.a) edit makefile_win of iem_mp3
! change to directory C:\Programs\pd\iemlib_R1.15\iem_mp3
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 10.b) compile iem_mp3
! doubleclick iem_mp3.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iem_mp3.dll will be created in C:\Programs\pd\iemlib_R1.15\lib ).
!
! 11.a) edit makefile_win of iem_t3_lib
! change to directory C:\Programs\pd\iemlib_R1.15\iem_t3_lib
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 11.b) compile iem_t3_lib
! doubleclick iem_t3_lib.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iem_t3_lib.dll will be created in C:\Programs\pd\iemlib_R1.15\lib ).
!
! 12.) copy external-libraries
! change to C:\Programs\pd\iemlib_R1.15\lib\
! ( e.g. copy C:\Programs\pd\iemlib_R1.15\lib\*.dll --> C:\Programs\pd\externs\ )
--- 1,91 ----
! Installation-guide for iemlib under windows (win_xp, win2k, win_me, win_nt or win98)
!
! iemlib_R1.16 is written by Thomas Musil from IEM Graz Austria
! and it is compatible to miller puckette's pd-0.36-0 to pd-0.37-3.
! see also LICENCE.txt, GnuLGPL.txt and README.txt.
!
!
! 1.) download and copy iemlib_R1.16_win.zip into your pd-installation-directory
! ( e.g. C:\Programs\pd\iemlib_R1.16_win.zip )
!
!
! 2.) unzip iemlib_R1.16_win.zip
! winzip create a directory C:\Programs\pd\iemlib_R1.16\
!
!
! 3.) copy external-libraries
! iemlib contains 4 *.dll-files ( iem_mp3.dll, iem_t3_lib.dll, iemlib1.dll, iemlib2.dll )
! ( e.g. copy C:\Programs\pd\iemlib_R1.16\lib\*.dll --> C:\Programs\pd\extra\ )
!
!
! 4.) copy pd-help-files-folder
! ( e.g. copy C:\Programs\pd\iemlib_R1.16\iemhelp\ --> C:\Programs\pd\doc\5.reference\iemhelp\ )
!
!
! 5.) add to your pd37_start.bat the following configuration-options:
! -path C:\Programs\pd\iemlib_R1.16\iemabs -lib iemlib1 -lib iemlib2 -lib iem_mp3 -lib iem_t3_lib
!
! or create a textfile pd37_start.bat with this content:
!
! @echo off
! set PD_INSTALL=C:\Programme\pd\bin
! set PD_AUDIO=-r 44100 -audiobuf 160
! set PD_MIDI=-nomidi
! set PD_PATH=-path C:/Programme/pd/iemlib_R1.16\iemabs
! set PD_LIB=-lib iemlib1 -lib iemlib2 -lib iem_mp3 -lib iem_t3_lib
! @echo starting pd ...
! %PD_INSTALL%\pd %PD_AUDIO% %PD_MIDI% %PD_PATH% %PD_LIB%
!
!
!
! How to compile iemlib under windows
!
! after installing iemlib and if You are owner of a VCC++ compiler:
!
! 6.a) edit makefile_win of iemlib1
! change to directory C:\Programs\pd\iemlib_R1.16\iemlib1
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 6.b) compile iemlib1
! doubleclick iemlib1.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iemlib1.dll will be created in C:\Programs\pd\iemlib_R1.16\lib ).
!
! 7.a) edit makefile_win of iemlib2
! change to directory C:\Programs\pd\iemlib_R1.16\iemlib2
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 7.b) compile iemlib2
! doubleclick iemlib2.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iemlib2.dll will be created in C:\Programs\pd\iemlib_R1.16\lib ).
!
! 8.a) edit makefile_win of iem_mp3
! change to directory C:\Programs\pd\iemlib_R1.16\iem_mp3
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 8.b) compile iem_mp3
! doubleclick iem_mp3.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iem_mp3.dll will be created in C:\Programs\pd\iemlib_R1.16\lib ).
!
! 9.a) edit makefile_win of iem_t3_lib
! change to directory C:\Programs\pd\iemlib_R1.16\iem_t3_lib
! and edit following lines of makefile_win and save
! ( VIS_CPP_PATH = "" and PD_INST_PATH = "" )
!
! 9.b) compile iem_t3_lib
! doubleclick iem_t3_lib.dsw, VCC++ will start,
! Menue: build/configuration = Release ,
! Menue: build/build all ,
! ( after this command, iem_t3_lib.dll will be created in C:\Programs\pd\iemlib_R1.16\lib ).
!
! 10.) copy external-libraries
! change to C:\Programs\pd\iemlib_R1.16\lib\
! ( e.g. copy C:\Programs\pd\iemlib_R1.16\lib\*.dll --> C:\Programs\pd\extra\ )
Index: LICENCE.txt
===================================================================
RCS file: /cvsroot/pure-data/externals/iemlib/LICENCE.txt,v
retrieving revision 1.3
retrieving revision 1.4
diff -C2 -d -r1.3 -r1.4
*** LICENCE.txt 1 Apr 2005 17:54:43 -0000 1.3
--- LICENCE.txt 2 Jun 2005 18:37:10 -0000 1.4
***************
*** 1,21 ****
! Copyright (C) IEM 2003, Thomas MUSIL [musil at iem.at]
!
! This library is free software; you can redistribute it and/or
! modify it under the terms of the GNU Lesser General Public
! License as published by the Free Software Foundation; either
! version 2.1 of the License, or (at your option) any later version.
!
! This library is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! Lesser General Public License for more details (see GnuLGPL.txt).
! (e.g. http://www.gnu.org/copyleft/lesser.html)
!
! You should have received a copy of the GNU Lesser General Public
! License along with this library; if not, write to the Free Software
! Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
!
! IEM - Institute of Electronic Music and Acoustics
! University of Music and Dramatic Arts Graz
! Inffeldgasse 10/3, 8010 Graz, Austria
! http://iem.at
\ No newline at end of file
--- 1,52 ----
! iemlib containing iemlib1, iemlib2, iem_t3_lib, iem_mp3 iemabs and iemhelp
!
! Copyright (C) Thomas MUSIL [musil_at_iem.at]
!
! This library is free software; you can redistribute it and/or
! modify it under the terms of the GNU Lesser General Public
! License as published by the Free Software Foundation; either
! version 2.1 of the License, or (at your option) any later version.
!
! This library is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! Lesser General Public License for more details (see GnuLGPL.txt).
! (e.g. http://www.gnu.org/copyleft/lesser.html)
!
! You should have received a copy of the GNU Lesser General Public
! License along with this library; if not, write to the Free Software
! Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
!
! IEM - Institute of Electronic Music and Acoustics, Graz
! Inffeldgasse 10/3, 8010 Graz, Austria
! http://iem.at
!
!
! <one line to give the library's name and a brief idea of what it does.>
! Copyright (C) <year> <name of author>
!
! This library is free software; you can redistribute it and/or
! modify it under the terms of the GNU Lesser General Public
! License as published by the Free Software Foundation; either
! version 2.1 of the License, or (at your option) any later version.
!
! This library is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! Lesser General Public License for more details.
!
! You should have received a copy of the GNU Lesser General Public
! License along with this library; if not, write to the Free Software
! Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
!
! Also add information on how to contact you by electronic and paper mail.
!
! You should also get your employer (if you work as a programmer) or your
! school, if any, to sign a "copyright disclaimer" for the library, if
! necessary. Here is a sample; alter the names:
!
! Yoyodyne, Inc., hereby disclaims all copyright interest in the
! library `Frob' (a library for tweaking knobs) written by James Random Hacker.
!
! <signature of Ty Coon>, 1 April 1990
! Ty Coon, President of Vice
\ No newline at end of file
Index: GnuLGPL.txt
===================================================================
RCS file: /cvsroot/pure-data/externals/iemlib/GnuLGPL.txt,v
retrieving revision 1.1.1.1
retrieving revision 1.2
diff -C2 -d -r1.1.1.1 -r1.2
*** GnuLGPL.txt 18 May 2004 21:32:42 -0000 1.1.1.1
--- GnuLGPL.txt 2 Jun 2005 18:37:10 -0000 1.2
***************
*** 1,505 ****
! GNU LESSER GENERAL PUBLIC LICENSE
! Version 2.1, February 1999
!
! Copyright (C) 1991, 1999 Free Software Foundation, Inc.
! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
! Everyone is permitted to copy and distribute verbatim copies
! of this license document, but changing it is not allowed.
!
! [This is the first released version of the Lesser GPL. It also counts
! as the successor of the GNU Library Public License, version 2, hence
[...981 lines suppressed...]
! You should have received a copy of the GNU Lesser General Public
! License along with this library; if not, write to the Free Software
! Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
!
! Also add information on how to contact you by electronic and paper mail.
!
! You should also get your employer (if you work as a programmer) or your
! school, if any, to sign a "copyright disclaimer" for the library, if
! necessary. Here is a sample; alter the names:
!
! Yoyodyne, Inc., hereby disclaims all copyright interest in the
! library `Frob' (a library for tweaking knobs) written by James Random Hacker.
!
! <signature of Ty Coon>, 1 April 1990
! Ty Coon, President of Vice
!
! That's all there is to it!
!
!
!
- Previous message: [PD-cvs] externals/iemlib/iemhelp hdial.pd, NONE, 1.1 help-hp10_bess~.pd, NONE, 1.1 help-hp2_bess~.pd, NONE, 1.1 help-hp3_bess~.pd, NONE, 1.1 help-hp4_bess~.pd, NONE, 1.1 help-hp5_bess~.pd, NONE, 1.1 help-hp6_bess~.pd, NONE, 1.1 help-hp7_bess~.pd, NONE, 1.1 help-hp8_bess~.pd, NONE, 1.1 help-hp9_bess~.pd, NONE, 1.1 help-iem_r.pd, NONE, 1.1 help-iem_s.pd, NONE, 1.1 help-lp10_bess~.pd, NONE, 1.1 help-lp2_bess~.pd, NONE, 1.1 help-lp3_bess~.pd, NONE, 1.1 help-lp4_bess~.pd, NONE, 1.1 help-lp5_bess~.pd, NONE, 1.1 help-lp6_bess~.pd, NONE, 1.1 help-lp7_bess~.pd, NONE, 1.1 help-lp8_bess~.pd, NONE, 1.1 help-lp9_bess~.pd, NONE, 1.1 help-parent$0.pd, NONE, 1.1 help-parentdollarzero.pd, NONE, 1.1 hradio.pd, NONE, 1.1 test-parentdollarzero.pd, NONE, 1.1 vradio.pd, NONE, 1.1 0.INTRO.txt, 1.2, 1.3 7_guis-INTRO.pd, 1.4, 1.5 all_guis-INTRO.pd, 1.4, 1.5 bng.pd, 1.4, 1.5 gui-menue.pd, 1.4, 1.5 help-$n.pd, 1.4, 1.5 help-FIR~.pd, 1.4, 1.5 help-LFO_noise~.pd, 1.4, 1.5 help-add2_comma.pd, 1.4, 1.5 help-addl~.pd, 1.4, 1.5 help-any.pd, 1.4, 1.5 help-ap1~.pd, 1.4, 1.5 help-ap2~.pd, 1.4, 1.5 help-bpe.pd, 1.4, 1.5 help-bpq2~.pd, 1.4, 1.5 help-bpw2~.pd, 1.4, 1.5 help-bsq2~.pd, 1.4, 1.5 help-bsw2~.pd, 1.4, 1.5 help-db2v.pd, 1.4, 1.5 help-dbtofad.pd, 1.4, 1.5 help-default.pd, 1.4, 1.5 help-divl~.pd, 1.4, 1.5 help-dollarg.pd, 1.4, 1.5 help-dsp.pd, 1.4, 1.5 help-dsp~.pd, 1.4, 1.5 help-exp_inc.pd, 1.4, 1.5 help-f2note.pd, 1.4, 1.5 help-fade~.pd, 1.4, 1.5 help-fadtodb.pd, 1.4, 1.5 help-fadtorms.pd, 1.4, 1.5 help-float24.pd, 1.4, 1.5 help-for++.pd, 1.4, 1.5 help-gate.pd, 1.4, 1.5 help-hml_shelf~.pd, 1.4, 1.5 help-hp10_butt~.pd, 1.4, 1.5 help-hp10_cheb~.pd, 1.4, 1.5 help-hp10_crit~.pd, 1.4, 1.5 help-hp1~.pd, 1.4, 1.5 help-hp2_butt~.pd, 1.4, 1.5 help-hp2_cheb~.pd, 1.4, 1.5 help-hp2_crit~.pd, 1.4, 1.5 help-hp2~.pd, 1.4, 1.5 help-hp3_butt~.pd, 1.4, 1.5 help-hp3_cheb~.pd, 1.4, 1.5 help-hp3_crit~.pd, 1.4, 1.5 help-hp4_butt~.pd, 1.4, 1.5 help-hp4_cheb~.pd, 1.4, 1.5 help-hp4_crit~.pd, 1.4, 1.5 help-hp5_butt~.pd, 1.4, 1.5 help-hp5_cheb~.pd, 1.4, 1.5 help-hp5_crit~.pd, 1.4, 1.5 help-hp6_butt~.pd, 1.4, 1.5 help-hp6_cheb~.pd, 1.4, 1.5 help-hp6_crit~.pd, 1.4, 1.5 help-hp7_butt~.pd, 1.4, 1.5 help-hp7_cheb~.pd, 1.4, 1.5 help-hp7_crit~.pd, 1.4, 1.5 help-hp8_butt~.pd, 1.4, 1.5 help-hp8_cheb~.pd, 1.4, 1.5 help-hp8_crit~.pd, 1.4, 1.5 help-hp9_butt~.pd, 1.4, 1.5 help-hp9_cheb~.pd, 1.4, 1.5 help-hp9_crit~.pd, 1.4, 1.5 help-iem_anything.pd, 1.4, 1.5 help-iem_append.pd, 1.4, 1.5 help-iem_blocksize~.pd, 1.4, 1.5 help-iem_i_route.pd, 1.4, 1.5 help-iem_pbank_csv.pd, 1.4, 1.5 help-iem_prepend.pd, 1.4, 1.5 help-iem_receive.pd, 1.4, 1.5 help-iem_route.pd, 1.4, 1.5 help-iem_samplerate~.pd, 1.4, 1.5 help-iem_sel_any.pd, 1.4, 1.5 help-iem_send.pd, 1.4, 1.5 help-ii.pd, 1.4, 1.5 help-iiroute.pd, 1.4, 1.5 help-init.pd, 1.4, 1.5 help-int_fract~.pd, 1.4, 1.5 help-list2send.pd, 1.4, 1.5 help-lp10_butt~.pd, 1.4, 1.5 help-lp10_cheb~.pd, 1.4, 1.5 help-lp10_crit~.pd, 1.4, 1.5 help-lp1_t~.pd, 1.4, 1.5 help-lp1~.pd, 1.4, 1.5 help-lp2_butt~.pd, 1.4, 1.5 help-lp2_cheb~.pd, 1.4, 1.5 help-lp2_crit~.pd, 1.4, 1.5 help-lp2~.pd, 1.4, 1.5 help-lp3_butt~.pd, 1.4, 1.5 help-lp3_cheb~.pd, 1.4, 1.5 help-lp3_crit~.pd, 1.4, 1.5 help-lp4_butt~.pd, 1.4, 1.5 help-lp4_cheb~.pd, 1.4, 1.5 help-lp4_crit~.pd, 1.4, 1.5 help-lp5_butt~.pd, 1.4, 1.5 help-lp5_cheb~.pd, 1.4, 1.5 help-lp5_crit~.pd, 1.4, 1.5 help-lp6_butt~.pd, 1.4, 1.5 help-lp6_cheb~.pd, 1.4, 1.5 help-lp6_crit~.pd, 1.4, 1.5 help-lp7_butt~.pd, 1.4, 1.5 help-lp7_cheb~.pd, 1.4, 1.5 help-lp7_crit~.pd, 1.4, 1.5 help-lp8_butt~.pd, 1.4, 1.5 help-lp8_cheb~.pd, 1.4, 1.5 help-lp8_crit~.pd, 1.4, 1.5 help-lp9_butt~.pd, 1.4, 1.5 help-lp9_cheb~.pd, 1.4, 1.5 help-lp9_crit~.pd, 1.4, 1.5 help-maverage~.pd, 1.4, 1.5 help-merge_any.pd, 1.4, 1.5 help-mergefilename.pd, 1.4, 1.5 help-modulo_counter.pd, 1.4, 1.5 help-mp3play~.pd, 1.4, 1.5 help-mull~.pd, 1.4, 1.5 help-once.pd, 1.4, 1.5 help-para_bp2~.pd, 1.4, 1.5 help-peakenv~.pd, 1.4, 1.5 help-pink~.pd, 1.4, 1.5 help-post_netreceive.pd, 1.4, 1.5 help-pp.pd, 1.4, 1.5 help-pre_inlet.pd, 1.4, 1.5 help-pre_netsend.pd, 1.4, 1.5 help-prepend.pd, 1.4, 1.5 help-prepend_ascii.pd, 1.4, 1.5 help-prvu~.pd, 1.4, 1.5 help-pvu~.pd, 1.4, 1.5 help-rbpq2~.pd, 1.4, 1.5 help-rbpw2~.pd, 1.4, 1.5 help-receive2list.pd, 1.4, 1.5 help-rmstofad.pd, 1.4, 1.5 help-round_zero.pd, 1.4, 1.5 help-round~.pd, 1.4, 1.5 help-rvu~.pd, 1.4, 1.5 help-sin_phase~.pd, 1.4, 1.5 help-soundfile_info.pd, 1.4, 1.5 help-speedlim.pd, 1.4, 1.5 help-split.pd, 1.4, 1.5 help-split3.pd, 1.4, 1.5 help-splitfilename.pd, 1.4, 1.5 help-stripfilename.pd, 1.4, 1.5 help-subl~.pd, 1.4, 1.5 help-t3_bpe.pd, 1.4, 1.5 help-t3_delay.pd, 1.4, 1.5 help-t3_line~.pd, 1.4, 1.5 help-t3_metro.pd, 1.4, 1.5 help-t3_sig~.pd, 1.4, 1.5 help-t3_timer.pd, 1.4, 1.5 help-toggle_mess.pd, 1.4, 1.5 help-transf_fader.pd, 1.4, 1.5 help-unsig~.pd, 1.4, 1.5 help-unsymbol.pd, 1.4, 1.5 help-v2db.pd, 1.4, 1.5 help-vcf_bp2~.pd, 1.4, 1.5 help-vcf_bp4~.pd, 1.4, 1.5 help-vcf_bp6~.pd, 1.4, 1.5 help-vcf_bp8~.pd, 1.4, 1.5 help-vcf_hp2~.pd, 1.4, 1.5 help-vcf_hp4~.pd, 1.4, 1.5 help-vcf_hp6~.pd, 1.4, 1.5 help-vcf_hp8~.pd, 1.4, 1.5 help-vcf_lp2~.pd, 1.4, 1.5 help-vcf_lp4~.pd, 1.4, 1.5 help-vcf_lp6~.pd, 1.4, 1.5 help-vcf_lp8~.pd, 1.4, 1.5 help-vcf_rbp2~.pd, 1.4, 1.5 help-vcf_rbp4~.pd, 1.4, 1.5 help-vcf_rbp6~.pd, 1.4, 1.5 help-vcf_rbp8~.pd, 1.4, 1.5 help-wrap.pd, 1.4, 1.5 hslider.pd, 1.4, 1.5 my_canvas.pd, 1.4, 1.5 my_numbox.pd, 1.4, 1.5 popup.pd, 1.4, 1.5 radiobutton.pd, 1.4, 1.5 test_dollarg.pd, 1.4, 1.5 toggle.pd, 1.4, 1.5 vdial.pd, 1.4, 1.5 vslider.pd, 1.4, 1.5 vu.pd, 1.4, 1.5 x_all_guis.pd, 1.4, 1.5
- Next message: [PD-cvs] pd/src x_connective.c,1.3.4.1,1.3.4.1.2.1
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the Pd-cvs
mailing list