[PD-cvs] externals/hardware/arduino/examples PD_all_inputs.pd, NONE, 1.1 PD_two_potentiometers.pd, NONE, 1.1 PD_inputs_to_PD.pd, 1.1, 1.2 PD_send_potentiometer.pd, 1.1, 1.2

Sun Mar 5 07:48:04 CET 2006

Update of /cvsroot/pure-data/externals/hardware/arduino/examples
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv20865

Modified Files:
	PD_inputs_to_PD.pd PD_send_potentiometer.pd 
Added Files:
	PD_all_inputs.pd PD_two_potentiometers.pd 
Log Message:
some example patches for the existing puredata firmwares, and the start of firmware for getting all inputs into Pd as fast as possible.  Some clean-up needed before a real release

Index: PD_inputs_to_PD.pd
===================================================================
RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_inputs_to_PD.pd,v
retrieving revision 1.1
retrieving revision 1.2
diff -C2 -d -r1.1 -r1.2
*** PD_inputs_to_PD.pd	4 Mar 2006 22:21:55 -0000	1.1
--- PD_inputs_to_PD.pd	5 Mar 2006 06:48:01 -0000	1.2
***************
*** 1,3 ****
! #N canvas 583 37 658 481 10;
  #X obj 29 56 r pushButton2;
  #X obj 29 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
--- 1,3 ----
! #N canvas 583 37 662 485 10;
  #X obj 29 56 r pushButton2;
  #X obj 29 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
***************
*** 27,31 ****
  -3754 -1 -1 0 256;
  #X obj 369 109 r potentioMeter2;
- #X msg 246 316 devicename /dev/tty.usbserial-181;
  #X text 242 298 On Mac OS X \, set this to the right value:;
  #X msg 192 255 open \$1;
--- 27,30 ----
***************
*** 66,69 ****
--- 65,69 ----
  #X restore 192 232 pd serin;
  #X text 273 233 serial port #;
+ #X msg 246 316 devicename /dev/tty.usbserial-191;
  #X connect 0 0 1 0;
  #X connect 2 0 3 0;
***************
*** 75,83 ****
  #X connect 15 0 14 0;
  #X connect 17 0 16 0;
! #X connect 18 0 21 0;
! #X connect 20 0 21 0;
! #X connect 21 0 29 0;
! #X connect 28 0 21 0;
! #X connect 29 0 32 0;
! #X connect 29 1 31 0;
! #X connect 34 0 20 0;
--- 75,83 ----
  #X connect 15 0 14 0;
  #X connect 17 0 16 0;
! #X connect 19 0 20 0;
! #X connect 20 0 28 0;
! #X connect 27 0 20 0;
! #X connect 28 0 31 0;
! #X connect 28 1 30 0;
! #X connect 33 0 19 0;
! #X connect 35 0 20 0;

--- NEW FILE: PD_all_inputs.pd ---
#N canvas 159 48 492 617 10;
#X obj 346 18 import zexy;
#X text 112 148 On Mac OS X \, set this to the right value:;
#X text 5 38 You might need to select another port \, check the Pd
window to see if it connected successfully:;
#X msg 136 120 close;
#X msg 116 165 devicename /dev/tty.usbserial-191;
#X obj 11 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC0 5 30 1 10
-3754 -1 -1 508 256;
#N canvas 162 133 518 368 serin 0;
#X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017
-1 0;
#X obj 241 251 s \$0-number-canvas;
#X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1
-1 0;
#X obj 101 134 + 1;
#X obj 100 173 outlet;
#X obj 101 39 inlet;
#X msg 241 228 label \$1;
#X obj 241 206 makefilename %d;
#X connect 2 0 3 0;
#X connect 3 0 4 0;
#X connect 3 0 7 0;
#X connect 5 0 2 0;
#X connect 6 0 1 0;
#X connect 7 0 6 0;
#X coords 0 -1 1 1 76 17 1 100 100;
#X restore 77 71 pd serin;
#X msg 77 119 open \$1;
#X text 4 -3 This patch works with the example Arduino firmware of
the same name.;
#X text 9 552 CAUTION! Watch out if you connect your potentiometer
without an extra resistor \, when you turn it all the way up \, the
full voltage and current will go to the input. This could fry your
board!;
#X obj 79 357 +;
#X obj 78 259 trigger float bang;
#X obj 95 318 float;
#X obj 95 337 * 10;
#X obj 176 345 float;
#X msg 196 290 0;
#X text 250 459 ASCII for A B C D E F;
#X obj 77 235 - 48;
#X obj 79 460 route 65 66 67 68 69 70;
#X obj 79 378 trigger bang float;
#X obj 79 417 float;
#X obj 247 386 float;
#X obj 79 440 pack float float;
#X obj 61 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC1 5 30 1 10
-3754 -1 -1 0 256;
#X obj 111 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC2 5 30 1 10
-3754 -1 -1 10 256;
#X obj 161 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC3 5 30 1 10
-3754 -1 -1 98 256;
#X obj 211 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC4 5 30 1 10
-3754 -1 -1 158 256;
#X obj 261 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC5 5 30 1 10
-3754 -1 -1 623 256;
#X obj 320 511 print ERRANT_VALUE;
#X obj 247 250 float;
#X obj 77 211 moses 58;
#X text 84 88 (sometimes it takes up to 10 seconds to close the serial
port \, if things are running fast);
#X text 181 121 <-- close before uploading a new firmware!;
#X obj 77 188 comport 1 19200;
#X connect 3 0 33 0;
#X connect 4 0 33 0;
#X connect 6 0 7 0;
#X connect 7 0 33 0;
#X connect 10 0 14 0;
#X connect 10 0 19 0;
#X connect 11 0 10 0;
#X connect 11 1 12 0;
#X connect 12 0 13 0;
#X connect 13 0 10 1;
#X connect 14 0 12 1;
#X connect 15 0 12 1;
#X connect 17 0 11 0;
#X connect 18 0 5 0;
#X connect 18 1 23 0;
#X connect 18 2 24 0;
#X connect 18 3 25 0;
#X connect 18 4 26 0;
#X connect 18 5 27 0;
#X connect 18 6 28 0;
#X connect 19 0 20 0;
#X connect 19 1 22 1;
#X connect 20 0 22 0;
#X connect 21 0 20 1;
#X connect 22 0 18 0;
#X connect 29 0 15 0;
#X connect 29 0 21 0;
#X connect 30 0 17 0;
#X connect 30 1 29 0;
#X connect 33 0 30 0;

Index: PD_send_potentiometer.pd
===================================================================
RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_send_potentiometer.pd,v
retrieving revision 1.1
retrieving revision 1.2
diff -C2 -d -r1.1 -r1.2
*** PD_send_potentiometer.pd	4 Mar 2006 22:21:55 -0000	1.1
--- PD_send_potentiometer.pd	5 Mar 2006 06:48:01 -0000	1.2
***************
*** 1,15 ****
! #N canvas 66 362 494 354 10;
! #X text 153 122 On Mac OS X \, set this to the right value:;
! #X obj 103 182 comport 1 9600;
! #X text 30 11 You might need to select another port \, check the Pd
  window to see if it connected successfully:;
! #X msg 163 87 close;
! #X msg 157 139 devicename /dev/tty.usbserial-191;
! #X obj 102 215 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -3754 -1 -1 79 256;
! #X text 36 252 CAUTION! Watch out if you connect your potentiometer
! without an extra resistor \, when you turn it all the way up \, the
! full voltage and currrent will go to the input. This could kill your
! board!;
  #N canvas 162 133 518 368 serin 0;
  #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017
--- 1,11 ----
! #N canvas 66 362 498 358 10;
! #X text 151 136 On Mac OS X \, set this to the right value:;
! #X obj 101 196 comport 1 9600;
! #X text 28 25 You might need to select another port \, check the Pd
  window to see if it connected successfully:;
! #X msg 161 101 close;
! #X msg 155 153 devicename /dev/tty.usbserial-191;
! #X obj 100 229 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -3754 -1 -1 13 256;
  #N canvas 162 133 518 368 serin 0;
  #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017
***************
*** 30,41 ****
  #X connect 7 0 6 0;
  #X coords 0 -1 1 1 76 17 1 100 100;
! #X restore 103 61 pd serin;
! #X msg 103 86 open \$1;
! #X text 184 62 serial port #;
! #X text 30 -20 This patch works with the example Arduino firmware of
  the same name.;
  #X connect 1 0 5 0;
  #X connect 3 0 1 0;
  #X connect 4 0 1 0;
! #X connect 7 0 8 0;
! #X connect 8 0 1 0;
--- 26,41 ----
  #X connect 7 0 6 0;
  #X coords 0 -1 1 1 76 17 1 100 100;
! #X restore 101 75 pd serin;
! #X msg 101 100 open \$1;
! #X text 182 76 serial port #;
! #X text 28 -6 This patch works with the example Arduino firmware of
  the same name.;
+ #X text 34 266 CAUTION! Watch out if you connect your potentiometer
+ without an extra resistor \, when you turn it all the way up \, the
+ full voltage and current will go to the input. This could kill your
+ board!;
  #X connect 1 0 5 0;
  #X connect 3 0 1 0;
  #X connect 4 0 1 0;
! #X connect 6 0 7 0;
! #X connect 7 0 1 0;

--- NEW FILE: PD_two_potentiometers.pd ---
#N canvas 327 35 530 629 10;
#X obj 420 2 import zexy;
#X text 127 139 On Mac OS X \, set this to the right value:;
#X obj 77 195 comport 1 9600;
#X text 5 42 You might need to select another port \, check the Pd
window to see if it connected successfully:;
#X msg 137 104 close;
#X msg 131 156 devicename /dev/tty.usbserial-191;
#X obj 111 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_0 -15
30 1 14 -3754 -1 -1 0 256;
#N canvas 162 133 518 368 serin 0;
#X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017
-1 0;
#X obj 241 251 s \$0-number-canvas;
#X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1
-1 0;
#X obj 101 134 + 1;
#X obj 100 173 outlet;
#X obj 101 39 inlet;
#X msg 241 228 label \$1;
#X obj 241 206 makefilename %d;
#X connect 2 0 3 0;
#X connect 3 0 4 0;
#X connect 3 0 7 0;
#X connect 5 0 2 0;
#X connect 6 0 1 0;
#X connect 7 0 6 0;
#X coords 0 -1 1 1 76 17 1 100 100;
#X restore 77 78 pd serin;
#X msg 77 103 open \$1;
#X text 158 79 serial port #;
#X text 4 -3 This patch works with the example Arduino firmware of
the same name.;
#X text 6 550 CAUTION! Watch out if you connect your potentiometer
without an extra resistor \, when you turn it all the way up \, the
full voltage and current will go to the input. This could fry your
board!;
#X obj 156 246 makefilename %c;
#X obj 77 225 select 13 10;
#X text 266 246 <-- convert integer to ASCII;
#X obj 223 424 +;
#X obj 193 470 float;
#X obj 221 315 trigger float bang;
#X obj 239 385 float;
#X obj 239 404 * 10;
#X obj 221 289 symbol2list;
#X obj 320 412 float;
#X msg 164 337 0;
#X obj 150 470 float;
#X text 197 339 <-- reset for the next pot reading;
#X text 303 285 <-- converts the ASCII digit;
#X text 332 297 symbol to a float;
#X text 169 225 <-- filter out newline characters;
#X obj 156 267 select B A;
#X obj 209 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_1 -15
30 1 14 -3754 -1 -1 0 256;
#X connect 2 0 13 0;
#X connect 4 0 2 0;
#X connect 5 0 2 0;
#X connect 7 0 8 0;
#X connect 8 0 2 0;
#X connect 12 0 28 0;
#X connect 13 2 12 0;
#X connect 15 0 16 1;
#X connect 15 0 21 0;
#X connect 15 0 23 1;
#X connect 16 0 29 0;
#X connect 17 0 15 0;
#X connect 17 1 18 0;
#X connect 18 0 19 0;
#X connect 19 0 15 1;
#X connect 20 0 17 0;
#X connect 21 0 18 1;
#X connect 22 0 18 1;
#X connect 23 0 6 0;
#X connect 28 0 22 0;
#X connect 28 0 23 0;
#X connect 28 1 22 0;
#X connect 28 1 16 0;
#X connect 28 2 20 0;