[PD-cvs] SF.net SVN: pure-data: [10083] trunk/externals/hardware/arduino
eighthave at users.sourceforge.net
eighthave at users.sourceforge.net
Tue Jun 24 19:31:10 CEST 2008
Revision: 10083
http://pure-data.svn.sourceforge.net/pure-data/?rev=10083&view=rev
Author: eighthave
Date: 2008-06-24 10:31:10 -0700 (Tue, 24 Jun 2008)
Log Message:
-----------
added .txt to README to make it easier to use on all platforms
Added Paths:
-----------
trunk/externals/hardware/arduino/README.txt
Removed Paths:
-------------
trunk/externals/hardware/arduino/README
Deleted: trunk/externals/hardware/arduino/README
===================================================================
--- trunk/externals/hardware/arduino/README 2008-06-24 17:30:22 UTC (rev 10082)
+++ trunk/externals/hardware/arduino/README 2008-06-24 17:31:10 UTC (rev 10083)
@@ -1,21 +0,0 @@
-
-This package includes a Pd object and a matching Arduino firmware. It allows
-you to control the Arduino board from Pd without having to program in
-Arduino's C++
-
-To use it, first unzip the included Firmata-2.0 firmware and follow the README
-included in there. Then you'll be able to choose firmware from Arduino
-application, in File -> Open -> Library-Firmata menu.
-
-Once you have uploaded a firmware to your Arduino board, open up
-arduino-test.pd in Pd, then choose your serial port with the [open( message.
-
-For more on Arduino, go to: http://arduino.cc
-
-You can get more information about this firmware here:
-http://www.arduino.cc/playground/Interfacing/Firmata
-
-WARNING! This version of the arduino object for Pd will only work with 2.0
-versions of Firmata. It will NOT work with older versions of the firmware!
-
-Hans-Christoph Steiner <hans at eds.org>
Copied: trunk/externals/hardware/arduino/README.txt (from rev 10082, trunk/externals/hardware/arduino/README)
===================================================================
--- trunk/externals/hardware/arduino/README.txt (rev 0)
+++ trunk/externals/hardware/arduino/README.txt 2008-06-24 17:31:10 UTC (rev 10083)
@@ -0,0 +1,21 @@
+
+This package includes a Pd object and a matching Arduino firmware. It allows
+you to control the Arduino board from Pd without having to program in
+Arduino's C++
+
+To use it, first unzip the included Firmata-2.0 firmware and follow the README
+included in there. Then you'll be able to choose firmware from Arduino
+application, in File -> Open -> Library-Firmata menu.
+
+Once you have uploaded a firmware to your Arduino board, open up
+arduino-test.pd in Pd, then choose your serial port with the [open( message.
+
+For more on Arduino, go to: http://arduino.cc
+
+You can get more information about this firmware here:
+http://www.arduino.cc/playground/Interfacing/Firmata
+
+WARNING! This version of the arduino object for Pd will only work with 2.0
+versions of Firmata. It will NOT work with older versions of the firmware!
+
+Hans-Christoph Steiner <hans at eds.org>
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
More information about the Pd-cvs
mailing list