[PD-cvs] SF.net SVN: pure-data:[10578] trunk/externals/moocow/pdstring
mukau at users.sourceforge.net
mukau at users.sourceforge.net
Mon Jan 19 17:12:37 CET 2009
Revision: 10578
http://pure-data.svn.sourceforge.net/pure-data/?rev=10578&view=rev
Author: mukau
Date: 2009-01-19 16:12:33 +0000 (Mon, 19 Jan 2009)
Log Message:
-----------
+ moved automake symlinks to copies
Modified Paths:
--------------
trunk/externals/moocow/pdstring/Makefile.in
trunk/externals/moocow/pdstring/autogen.sh
trunk/externals/moocow/pdstring/config/Makefile.in
trunk/externals/moocow/pdstring/src/Makefile.in
trunk/externals/moocow/pdstring/src/unsigned.pd
Added Paths:
-----------
trunk/externals/moocow/pdstring/autoreconf.sh
trunk/externals/moocow/pdstring/config/depcomp
trunk/externals/moocow/pdstring/config/install-sh
trunk/externals/moocow/pdstring/config/missing
trunk/externals/moocow/pdstring/config/mkinstalldirs
Removed Paths:
-------------
trunk/externals/moocow/pdstring/config/depcomp
trunk/externals/moocow/pdstring/config/install-sh
trunk/externals/moocow/pdstring/config/missing
trunk/externals/moocow/pdstring/config/mkinstalldirs
Modified: trunk/externals/moocow/pdstring/Makefile.in
===================================================================
--- trunk/externals/moocow/pdstring/Makefile.in 2009-01-19 10:16:33 UTC (rev 10577)
+++ trunk/externals/moocow/pdstring/Makefile.in 2009-01-19 16:12:33 UTC (rev 10578)
@@ -54,7 +54,7 @@
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES =
SOURCES =
Modified: trunk/externals/moocow/pdstring/autogen.sh
===================================================================
--- trunk/externals/moocow/pdstring/autogen.sh 2009-01-19 10:16:33 UTC (rev 10577)
+++ trunk/externals/moocow/pdstring/autogen.sh 2009-01-19 16:12:33 UTC (rev 10578)
@@ -32,8 +32,8 @@
if test -n "$MY_AMDIRS"; then
for d in $MY_AMDIRS ; do
- echo "(cd $d ; $AUTOMAKE -a)"
- (cd $d ; $AUTOMAKE -a)
+ echo "(cd $d ; $AUTOMAKE -a -c)"
+ (cd $d ; $AUTOMAKE -a -c)
done
fi
Added: trunk/externals/moocow/pdstring/autoreconf.sh
===================================================================
--- trunk/externals/moocow/pdstring/autoreconf.sh (rev 0)
+++ trunk/externals/moocow/pdstring/autoreconf.sh 2009-01-19 16:12:33 UTC (rev 10578)
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+exec autoreconf --install --force --verbose
+#--symlink
Property changes on: trunk/externals/moocow/pdstring/autoreconf.sh
___________________________________________________________________
Added: svn:executable
+ *
Added: svn:eol-style
+ native
Modified: trunk/externals/moocow/pdstring/config/Makefile.in
===================================================================
--- trunk/externals/moocow/pdstring/config/Makefile.in 2009-01-19 10:16:33 UTC (rev 10577)
+++ trunk/externals/moocow/pdstring/config/Makefile.in 2009-01-19 16:12:33 UTC (rev 10578)
@@ -41,12 +41,12 @@
POST_UNINSTALL = :
subdir = config
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in depcomp \
- install-sh missing mkinstalldirs
+ install-sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES =
SOURCES =
Deleted: trunk/externals/moocow/pdstring/config/depcomp
===================================================================
--- trunk/externals/moocow/pdstring/config/depcomp 2009-01-19 10:16:33 UTC (rev 10577)
+++ trunk/externals/moocow/pdstring/config/depcomp 2009-01-19 16:12:33 UTC (rev 10578)
@@ -1 +0,0 @@
-link /usr/share/automake-1.9/depcomp
\ No newline at end of file
Added: trunk/externals/moocow/pdstring/config/depcomp
===================================================================
--- trunk/externals/moocow/pdstring/config/depcomp (rev 0)
+++ trunk/externals/moocow/pdstring/config/depcomp 2009-01-19 16:12:33 UTC (rev 10578)
@@ -0,0 +1,530 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2005-07-09.11
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake at gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+ stat=$?
+
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mecanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Property changes on: trunk/externals/moocow/pdstring/config/depcomp
___________________________________________________________________
Added: svn:executable
+ *
Deleted: trunk/externals/moocow/pdstring/config/install-sh
===================================================================
--- trunk/externals/moocow/pdstring/config/install-sh 2009-01-19 10:16:33 UTC (rev 10577)
+++ trunk/externals/moocow/pdstring/config/install-sh 2009-01-19 16:12:33 UTC (rev 10578)
@@ -1 +0,0 @@
-link /usr/share/automake-1.9/install-sh
\ No newline at end of file
Added: trunk/externals/moocow/pdstring/config/install-sh
===================================================================
--- trunk/externals/moocow/pdstring/config/install-sh (rev 0)
+++ trunk/externals/moocow/pdstring/config/install-sh 2009-01-19 16:12:33 UTC (rev 10578)
@@ -0,0 +1,323 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-05-14.22
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
+
+ -T) no_target_directory=true
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ *) # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ test -n "$dir_arg$dstarg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+ break;;
+ esac
+done
+
+if test -z "$1"; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ src=
+
+ if test -d "$dst"; then
+ mkdircmd=:
+ chmodcmd=
+ else
+ mkdircmd=$mkdirprog
+ fi
+ else
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dst=$dst/`basename "$src"`
+ fi
+ fi
+
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ shift
+ IFS=$oIFS
+
+ pathcomp=
+
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp"
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test -d "$pathcomp" || exit
+ fi
+ pathcomp=$pathcomp/
+ done
+ fi
+
+ if test -n "$dir_arg"; then
+ $doit $mkdircmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+ else
+ dstfile=`basename "$dst"`
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Copy the file name to the temp name.
+ $doit $cpprog "$src" "$dsttmp" &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ || {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ }
+ }
+ fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+ (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Property changes on: trunk/externals/moocow/pdstring/config/install-sh
___________________________________________________________________
Added: svn:executable
+ *
Deleted: trunk/externals/moocow/pdstring/config/missing
===================================================================
--- trunk/externals/moocow/pdstring/config/missing 2009-01-19 10:16:33 UTC (rev 10577)
+++ trunk/externals/moocow/pdstring/config/missing 2009-01-19 16:12:33 UTC (rev 10578)
@@ -1 +0,0 @@
-link /usr/share/automake-1.9/missing
\ No newline at end of file
Added: trunk/externals/moocow/pdstring/config/missing
===================================================================
--- trunk/externals/moocow/pdstring/config/missing (rev 0)
+++ trunk/externals/moocow/pdstring/config/missing 2009-01-19 16:12:33 UTC (rev 10578)
@@ -0,0 +1,360 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake at gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Property changes on: trunk/externals/moocow/pdstring/config/missing
___________________________________________________________________
Added: svn:executable
+ *
Deleted: trunk/externals/moocow/pdstring/config/mkinstalldirs
===================================================================
--- trunk/externals/moocow/pdstring/config/mkinstalldirs 2009-01-19 10:16:33 UTC (rev 10577)
+++ trunk/externals/moocow/pdstring/config/mkinstalldirs 2009-01-19 16:12:33 UTC (rev 10578)
@@ -1 +0,0 @@
-link /usr/share/automake-1.9/mkinstalldirs
\ No newline at end of file
Added: trunk/externals/moocow/pdstring/config/mkinstalldirs
===================================================================
--- trunk/externals/moocow/pdstring/config/mkinstalldirs (rev 0)
+++ trunk/externals/moocow/pdstring/config/mkinstalldirs 2009-01-19 16:12:33 UTC (rev 10578)
@@ -0,0 +1,158 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+
+scriptversion=2005-06-29.22
+
+# Original author: Noah Friedman <friedman at prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake at gnu.org> or send patches to
+# <automake-patches at gnu.org>.
+
+errstatus=0
+dirmode=
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake at gnu.org>."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage"
+ exit $?
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --version)
+ echo "$0 $scriptversion"
+ exit $?
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
+
+for file
+do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error. This is a problem when calling mkinstalldirs
+# from a parallel make. We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
+case $dirmode in
+ '')
+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ test -d ./-p && rmdir ./-p
+ test -d ./--version && rmdir ./--version
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+ test ! -d ./--version; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ else
+ # Clean up after NextStep and OpenStep mkdir.
+ for d in ./-m ./-p ./--version "./$dirmode";
+ do
+ test -d $d && rmdir $d
+ done
+ fi
+ ;;
+esac
+
+for file
+do
+ case $file in
+ /*) pathcomp=/ ;;
+ *) pathcomp= ;;
+ esac
+ oIFS=$IFS
+ IFS=/
+ set fnord $file
+ shift
+ IFS=$oIFS
+
+ for d
+ do
+ test "x$d" = x && continue
+
+ pathcomp=$pathcomp$d
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp=$pathcomp/
+ done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Property changes on: trunk/externals/moocow/pdstring/config/mkinstalldirs
___________________________________________________________________
Added: svn:executable
+ *
Modified: trunk/externals/moocow/pdstring/src/Makefile.in
===================================================================
--- trunk/externals/moocow/pdstring/src/Makefile.in 2009-01-19 10:16:33 UTC (rev 10577)
+++ trunk/externals/moocow/pdstring/src/Makefile.in 2009-01-19 16:12:33 UTC (rev 10578)
@@ -60,7 +60,7 @@
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(pdexternsdir)" "$(DESTDIR)$(pddocdir)" \
Modified: trunk/externals/moocow/pdstring/src/unsigned.pd
===================================================================
--- trunk/externals/moocow/pdstring/src/unsigned.pd 2009-01-19 10:16:33 UTC (rev 10577)
+++ trunk/externals/moocow/pdstring/src/unsigned.pd 2009-01-19 16:12:33 UTC (rev 10578)
@@ -4,11 +4,24 @@
#X obj 119 146 print s2a;
#X obj 105 176 any2string;
#X floatatom 105 208 5 0 0 0 - - -;
-#X msg 56 37 -10;
-#X msg 94 37 246;
+#X msg 105 48 -10;
+#X msg 143 48 246;
+#X floatatom 238 207 5 0 0 0 - - -;
+#X floatatom 240 82 5 0 0 1 byte_value - -;
+#X msg 240 49 -10;
+#X msg 278 49 246;
+#X obj 238 115 bytes2any;
+#X obj 238 175 any2bytes;
+#X obj 252 145 print s2b;
#X connect 0 0 1 0;
#X connect 1 0 2 0;
#X connect 1 0 3 0;
#X connect 3 0 4 0;
#X connect 5 0 0 0;
#X connect 6 0 0 0;
+#X connect 8 0 11 0;
+#X connect 9 0 8 0;
+#X connect 10 0 8 0;
+#X connect 11 0 12 0;
+#X connect 11 0 13 0;
+#X connect 12 0 7 0;
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
More information about the Pd-cvs
mailing list