[PD-dev] build error
marius schebella
marius.schebella at gmail.com
Fri Apr 11 22:44:21 CEST 2008
ok, the problem is that the following lines do not work on 10.5:
# this is necessary to deal with cross-platform echo issues with '-e'
ifeq ($(shell echo -e|sed 's|^-||'),e)
ECHO = /bin/echo
else
ECHO = echo
endif
or maybe they work, but somehow this still calls /bin/echo, even if I
uncomment the whole thing and hardcode it to "echo" some lines down,
Makefile is still using /bin/echo, but should be using /sw/bin/echo,
because which echo says /sw/bin/echo.
I had to change $(ECHO) to /sw/bin/echo and then it compiled, but that's
of course no solution for other platforms.
let's see if the rest of pd-extended compiles...
marius.
Hans-Christoph Steiner wrote:
>
> you are probably running your tests in your default 'bash' environment.
> The script runs in its own 'sh' environment, which is most likely
> somewhat different.
>
> Try the test in a test.sh script with #!/bin/sh at the top.
>
> .hc
>
>
> On Apr 11, 2008, at 11:12 AM, marius schebella wrote:
>> I cannot confirm that:
>>
>> echo -e marius\\nhans
>> prints out
>>
>> marius
>> hans
>>
>> as expected.
>> but maybe the problem is that
>> ECHO = echo
>> prints out
>> = echo
>> marius.
>>
>> Hans-Christoph Steiner wrote:
>>> It's actually, the "-e" option to 'echo', which means "interpret
>>> extended syntax", like "\n". Not all 'echo's support it. Your
>>> 'echo' does not, it just echos the "-e" and "\n" unchanged.
>>> Basically, someone needs to rewrite that chunk to not rely on a
>>> specific version of 'echo'. I think it could be done with 'sed'
>>> easily, or perhaps 'printf', if anyone wants to give it a shot.
>>> .hc
>>> On Apr 10, 2008, at 9:05 PM, marius schebella wrote:
>>>> I think the toxy error results from some sed problem, in particular
>>>> the "-e" option of sed. sed seems to write a strange line into
>>>> setup.wiq if I open it, the first line starts like
>>>>
>>>> -e // Do not edit this file (edit "../test/toxy/setup.wid", and run
>>>> "make").\n//\nputs stderr [concat loading built-in widget definitions]
>>>> package provide toxywidgets 0.1.0.17
>>>>
>>>> i am not a frequent sed user, and I also don't know what the
>>>> makefile hack means, I think, hans, you added that, maybe for 10.5
>>>> it needs a special treatment:
>>>>
>>>> ROOT_DIR = ..
>>>> WIDPATH = $(ROOT_DIR)/test/toxy/setup.wid
>>>> WIQFILE = $(notdir $(WIDPATH:.wid=.wiq))
>>>> # this is necessary to deal with cross-platform echo issues with '-e'
>>>> ifeq ($(shell echo -e|sed 's|^-||'),e) ECHO = /bin/echo
>>>> else
>>>> ECHO = echo
>>>> endif
>>>> redefault: checkwiq $(WIQFILE) default
>>>> checkwiq:
>>>> @if [ -f $(WIQFILE) ] && ! [ -s $(WIQFILE) ] ; then \
>>>> echo ERROR: empty file $(WIQFILE)... removed ; \
>>>> rm -f $(WIQFILE) ; fi
>>>> $(WIQFILE): $(WIDPATH)
>>>> @echo transferring widget definitions from \"$<\" to \"$@\"
>>>> # LATER think how to replace puts with pdtk_post
>>>> $(ECHO) -e '// Do not edit this file (edit "$<", and run
>>>> "make").\n//\nputs stderr [concat loading built-in widget
>>>> definitions]' \
>>>> | cat - $< | sed \
>>>> -e '1,\|//$$|{p;d;}' \
>>>> -e 's/\([\\\"]\)/\\\1/g' \
>>>> -e 's/^.*$$/\"&\\n\"/' > $@
>>>> @if [ -f $(WIQFILE) ] && ! [ -s $(WIQFILE) ] ; then \
>>>> echo ERROR: transfer failed... $(WIQFILE) removed ; \
>>>> rm -f $(WIQFILE) ; fi
>>>> include $(ROOT_DIR)/Makefile.common
>>>>
>>>> marius.
>>>>
>>>> Hans-Christoph Steiner wrote:
>>>>> 10.4 builds work on 10.5 fine, as far as I know. Are you having
>>>>> problems building or using binaries? Yes, Fink is not perfect, but
>>>>> imagine trying to build all that stuff by hand... and then write
>>>>> up instructions for someone else to do it... shudder...
>>>>> - My FTGL update has be included in Fink, so no need for the
>>>>> manual file install:
>>>>> http://pdb.finkproject.org/pdb/package.php/libftgl1
>>>>> - I haven't run into the ptex-nox-base problem myself, I generally
>>>>> try installing all of the dependencies from 'stable', then switch
>>>>> to 'unstable' for the rest. If an 'unstable' package adds more
>>>>> dependencies, then I switch back to 'stable' and try building them
>>>>> all there, then switch back to 'unstable' to finish everything.
>>>>> It may sound complicated, but it is not really. It is just some
>>>>> copy-n- pasting of package names, and running 'fink configure' a
>>>>> few times.
>>>>> - the toxy build problem is the classic 'nifty hack' issue, where
>>>>> the dev stuck some write-only code in the Makefile as a quick hack
>>>>> to get things working, then built the library upon that hack...
>>>>> .hc
>>>>> On Apr 10, 2008, at 4:03 AM, David Plans Casal wrote:
>>>>>> On 10 Apr 2008, at 01:35, bsoisoi wrote:
>>>>>>
>>>>>>> are you on 10.5? Welcome to the mac os x pd-extended nightmare
>>>>>> Hear hear. 10.5 build is becoming the first reason in ten years I've
>>>>>> looked for another dev platform than pd. Mind, I think maybe a switch
>>>>>> back to old Linux is a better option.
>>>>>>
>>>>>> David
>>>>>>
>>>>>>> !B
>>>>>>>
>>>>>>>
>>>>>>> On Apr 9, 2008, at 7:52 PM, marius schebella wrote:
>>>>>>>
>>>>>>>> tried fink install coreutils-default and...
>>>>>>>> ... then I tried fink install sed and...
>>>>>>>> ... then it did not work still.
>>>>>>>> marius.
>>>>>>>>
>>>>>>>>
>>>>>>>> Hans-Christoph Steiner wrote:
>>>>>>>>> Arg, this bug again. There is some crazy scripting in this
>>>>>>>>> makefile, it
>>>>>>>>> is quite problematic:
>>>>>>>>>
>>>>>>>>> http://pure-data.svn.sourceforge.net/viewvc/pure-data/trunk/
>>>>>>>>> externals/miXed/toxy/Makefile
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> .hc
>>>>>>>>>
>>>>>>>>> On Apr 9, 2008, at 6:22 PM, marius schebella wrote:
>>>>>>>>>> hi,
>>>>>>>>>> trying to build an intel build of pd-extended and get an error
>>>>>>>>>> for
>>>>>>>>>> toxy,
>>>>>>>>>> don't know what is wrong. thanks,
>>>>>>>>>> marius.
>>>>>>>>>>
>>>>>>>>>> gcc -Wall -W -Wstrict-prototypes -Wno-unused -Wno-parentheses
>>>>>>>>>> -Wno-switch -march=pentium4 -msse2 -mfpmath=sse -ftree-vectorize
>>>>>>>>>> -ftree-vectorizer-verbose=2 -DUNIX -DMACOSX -I . -I ../../../pd/
>>>>>>>>>> src -I
>>>>>>>>>> ../shared -c -o widgettype.o widgettype.c
>>>>>>>>>> In file included from widgettype.c:16:
>>>>>>>>>> setup.wiq:2: error: ‘e’ undeclared here (not in a function)
>>>>>>>>>> setup.wiq:2: error: syntax error before ‘package’
>>>>>>>>>> In file included from widgettype.c:16:
>>>>>>>>>> setup.wiq:2:29: error: too many decimal points in number
>>>>>>>>>> setup.wiq:4:3: error: invalid preprocessing directive #LATER
>>>>>>>>>> setup.wiq:5:3: error: invalid preprocessing directive #glue
>>>>>>>>>> setup.wiq:6:3: error: invalid preprocessing directive #LATER
>>>>>>>>>> setup.wiq:7:3: error: invalid preprocessing directive #LATER
>>>>>>>>>> setup.wiq:8:3: error: invalid preprocessing directive #way
>>>>>>>>>> setup.wiq:9:3: error: invalid preprocessing directive #right
>>>>>>>>>> setup.wiq:11:3: error: invalid preprocessing directive #LATER
>>>>>>>>>> setup.wiq:14:3: error: invalid preprocessing directive #FIXME
>>>>>>>>>> setup.wiq:18: error: syntax error before ‘{’ token
>>>>>>>>>> setup.wiq:23:3: error: invalid preprocessing directive #valid
>>>>>>>>>> setup.wiq:32:3: error: invalid preprocessing directive #FIXME
>>>>>>>>>> setup.wiq:33:3: error: invalid preprocessing directive #In
>>>>>>>>>> setup.wiq:34:3: error: invalid preprocessing directive #try
>>>>>>>>>> setup.wiq:39:3: error: invalid preprocessing directive #FIXME
>>>>>>>>>> setup.wiq:40:7: error: invalid preprocessing directive #pd
>>>>>>>>>> setup.wiq:73:3: error: invalid preprocessing directive #LATER
>>>>>>>>>> setup.wiq:80: error: syntax error before ‘{’ token
>>>>>>>>>> setup.wiq:99: error: syntax error before ‘{’ token
>>>>>>>>>> setup.wiq:106:3: error: invalid preprocessing directive #LATER
>>>>>>>>>> setup.wiq:111: error: stray ‘\’ in program
>>>>>>>>>> setup.wiq:131:3: error: invalid preprocessing directive #FIXME
>>>>>>>>>> setup.wiq:133:3: error: invalid preprocessing directive #FIXME
>>>>>>>>>> setup.wiq:148:3: error: invalid preprocessing directive #puts
>>>>>>>>>> setup.wiq:150:7: error: invalid preprocessing directive #puts
>>>>>>>>>> setup.wiq:154: error: ‘catch’ undeclared here (not in a function)
>>>>>>>>>> setup.wiq:154: error: syntax error before ‘{’ token
>>>>>>>>>> setup.wiq:175:3: error: invalid preprocessing directive #puts
>>>>>>>>>> setup.wiq:187: error: syntax error before ‘&’ token
>>>>>>>>>> setup.wiq:187: error: ‘concat’ undeclared here (not in a
>>>>>>>>>> function)
>>>>>>>>>> setup.wiq:187: error: syntax error before ‘tcl’
>>>>>>>>>> setup.wiq:188: error: stray ‘\’ in program
>>>>>>>>>> setup.wiq:192:3: error: invalid preprocessing directive
>>>>>>>>>> #empirically
>>>>>>>>>> setup.wiq:193:3: error: invalid preprocessing directive #better
>>>>>>>>>> setup.wiq:196: error: stray ‘\’ in program
>>>>>>>>>> setup.wiq:202: error: stray ‘\’ in program
>>>>>>>>>> setup.wiq:207:3: error: invalid preprocessing directive
>>>>>>>>>> #pdtk_canvas_mouseup
>>>>>>>>>> setup.wiq:214: error: stray ‘\’ in program
>>>>>>>>>> setup.wiq:243:3: error: invalid preprocessing directive #undo
>>>>>>>>>> setup.wiq:248:3: error: invalid preprocessing directive #to
>>>>>>>>>> setup.wiq:273:3: error: invalid preprocessing directive #standard
>>>>>>>>>> setup.wiq:275:3: error: invalid preprocessing directive #FIXME
>>>>>>>>>> setup.wiq:278: error: stray ‘\’ in program
>>>>>>>>>> setup.wiq:290: error: stray ‘\’ in program
>>>>>>>>>> setup.wiq:292: error: stray ‘\’ in program
>>>>>>>>>> setup.wiq:298:3: error: invalid preprocessing directive #puts
>>>>>>>>>> setup.wiq:299: error: syntax error before ‘{’ token
>>>>>>>>>> setup.wiq:315:3: error: invalid preprocessing directive #FIXME
>>>>>>>>>> setup.wiq:318:2: error: invalid preprocessing directive #>
>>>>>>>>>> setup.wiq:319:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:320:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:321:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:323:2: error: invalid preprocessing directive #>
>>>>>>>>>> setup.wiq:324:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:325:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:326:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:327:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:329:2: error: invalid preprocessing directive #>
>>>>>>>>>> setup.wiq:330:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:331:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:333:2: error: invalid preprocessing directive #@
>>>>>>>>>> setup.wiq:336:2: error: invalid preprocessing directive #>
>>>>>>>>>> setup.wiq:337:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:338:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:339:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:340:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:341:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:342:2: error: invalid preprocessing directive #.
>>>>>>>>>> setup.wiq:344:2: error: invalid preprocessing directive #@
>>>>>>>>>> setup.wiq:345: error: stray ‘#’ in program
>>>>>>>>>> setup.wiq:345: error: stray ‘#’ in program
>>>>>>>>>> make[3]: *** [widgettype.o] Error 1
>>>>>>>>>> make[2]: *** [toxy_install] Error 2
>>>>>>>>>> make[1]: *** [externals_install] Error 2
>>>>>>>>>> make: *** [extended_install] Error 2
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> PD-dev mailing list
>>>>>>>>>> PD-dev at iem.at
>>>>>>>>>> http://lists.puredata.info/listinfo/pd-dev
>>>>>>>>>
>>>>>>>>> -------------------------------------------------------------------
>>>>>>>>> ---------
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Access to computers should be unlimited and total. - the hacker
>>>>>>>>> ethic
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> PD-dev mailing list
>>>>>>>> PD-dev at iem.at
>>>>>>>> http://lists.puredata.info/listinfo/pd-dev
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> PD-dev mailing list
>>>>>>> PD-dev at iem.at
>>>>>>> http://lists.puredata.info/listinfo/pd-dev
>>>>>>
>>>>>> _______________________________________________
>>>>>> PD-dev mailing list
>>>>>> PD-dev at iem.at
>>>>>> http://lists.puredata.info/listinfo/pd-dev
>>>>> ------------------------------------------------------------------------
>>>>> ----
>>>>> I spent 33 years and four months in active military service and
>>>>> during that period I spent most of my time as a high class muscle
>>>>> man for Big Business, for Wall Street and the bankers. -
>>>>> General Smedley Butler
>>>>> _______________________________________________
>>>>> PD-dev mailing list
>>>>> PD-dev at iem.at
>>>>> http://lists.puredata.info/listinfo/pd-dev
>>> ----------------------------------------------------------------------------
>>> ¡El pueblo unido jamás será vencido!
>
>
>
> ----------------------------------------------------------------------------
>
>
> There is no way to peace, peace is the way. -A.J. Muste
>
>
>
More information about the Pd-dev
mailing list