bendin and touchin confused

[Toshinori Ohkouchi]

Hi All

It happened in my case.

----------------------------------------------
pd030/ s_nt.c / void sys_poll_midi(void)

   	    switch (msgtype)
    	    {
    		case 0: inmidi_noteon(0, chan, byte1, 0); break; 
    		case 1: inmidi_noteon(0, chan, byte1, byte2); break; 
    		case 2: inmidi_polyaftertouch(0, chan, byte1, byte2); break; 
    		case 3: inmidi_controlchange(0, chan, byte1, byte2); break; 
    		case 4: inmidi_programchange(0, chan, byte1); break; 
>    		case 6: inmidi_aftertouch(0, chan, byte1); break; 
>		case 5: inmidi_pitchbend(0, chan, byte1<<7 + byte2 - 8192); break; 
----------------------------------------------------

>    		case 5: inmidi_aftertouch(0, chan, byte1); break; 
>		case 6: inmidi_pitchbend(0, chan, byte1<<7 + byte2 - 8192); break; 
                 ~


Still  BENDIN is buggy,but confusion is corrected.
Sorry to Strange English. :-)



    		
>Hi there,
>
>I experienced a strange problem trying to use the pitch-bend midi data
>coming from my synthesizer (Kawai K11):
>
>The bendin-objekt receives the aftertouch data and touchin receives
>something like pitch bend data but only '0' or '127'. If I move the
>wheel I allways get '0', only at it's very end I suddenly get '127'...
>
>This happens with WinNT-pd 0.28 to 0.31 (haven't tried any other
>versions jet). Using another synth does not help (I have checked midi
>data with a small software that diplays midi bytes: pitch bend is
>present if I move the wheel...).
>
>Any suggestions how / where to get the pitch bend data from?
>
>thanks,
>
>Olaf
>
>


Toshinori Ohkouchi
大河内俊則