table/writesf/vcf~

[mik]

Yes, it works. It's indeed only the 0.32 help file which makes pd crash.
Problem solved.
Thanks.
mik
----- Original Message -----
From: "Norbert Math" <math at iem.kug.ac.at>
To: <pd-list at iem.mhsg.ac.at>
Sent: Wednesday, December 13, 2000 5:51 PM
Subject: Re: table/writesf/vcf~


>
>
> mik wrote:
>
> > hi
> > - vcf~ makes pd exit
>
> on my debian linux box vcf~ works in pd032 (i used the
> filter-floyd example), but as soon as i open the help
> for vcf~ pd dies.
>
> i opened the vcf~ help file in pd030, "edited" it
> (i.e. moved the boxes around) - now it opens fine also
> in pd032.
>
> here it is, i wonder if pd survies opening it on
> your boxes ...
>
> norbert
>
>
> #N canvas 269 89 600 496 10;
> #X floatatom 274 116;
> #X obj 274 146 sig~;
> #X floatatom 333 218;
> #X floatatom 265 334;
> #X obj 265 294 env~;
> #X floatatom 149 334;
> #X obj 149 185 phasor~;
> #X obj 149 215 cos~;
> #X floatatom 149 119;
> #X obj 149 149 sig~;
> #X text 83 203 cosine;
> #X text 70 218 test signal;
> #X obj 149 290 env~;
> #X text 111 355 amp in (db);
> #X text 53 119 test frequency;
> #X text 251 356 amp out (db);
> #X obj 265 262 vcf~;
> #X text 314 114 center frequency;
> #X text 339 199 q;
> #X text 25 18 vcf~ -- voltage-controlled filter;
> #X floatatom 332 40;
> #X connect 0 0 1 0;
> #X connect 1 0 16 1;
> #X connect 2 0 16 2;
> #X connect 4 0 3 0;
> #X connect 6 0 7 0;
> #X connect 7 0 12 0;
> #X connect 7 0 16 0;
> #X connect 8 0 9 0;
> #X connect 9 0 6 0;
> #X connect 12 0 5 0;
> #X connect 16 0 4 0;
> #X connect 20 0 8 0;
> #X connect 20 0 0 0;
>
>