[PD] Midi controller problem with PD 0.37

[David McCallum]

         Last I checked .37 had problems with MIDI in Windows. So use .36 
until they're fixed.

David

At 16:25 24/07/2003, Brad KLIGERMAN wrote:
>I was using an Evolution UC-16 midi controller connected to a USB port 
>with winXP and PD 0.36 without any problems. I started using PD 0.37-test 
>6 and get the following message when PD loads :
>
> >midi input enabled; warning, don't close the DOS window directly!
> >could not open midi input device number 1: PortMidi: `Invalid device ID'
> >could not open midi output device number -1: PortMidi: `Invalid device ID'
> >12 audio buffers
>
>with the following pd.bat :
>
> >@echo off
> >cd bin
> >pd -midiindev 1 -path ...
>
>I still have 0.36 loaded, and I verified that the midi controller works 
>fine, but using the same pd.bat, it doesn't work with 0.37.
>Is there something I'm missing here??
>
>bradKLIGERMAN
>
>
>_______________________________________________
>PD-list mailing list
>PD-list at iem.at
>http://iem.at/cgi-bin/mailman/listinfo/pd-list
>

.
. David McCallum
.  Music wants to be free
. http://mentalfloss.ca/sintheta
.