[PD] Anyone working with JackTools on OSX?

[Johnny - elementicaotici]

On Jan 8, 2004, at 16:34, derek holzer wrote:

> Jose,
>
> One thing you could try:
>
> Open your Makefile and check to see that all the paths are correct.  
> You should see some notes that ask things like "Where is your m_pd.h?"  
> and such things. Do a manual search for anything that is listed as an  
> "include" and see if it is the correct path.
>
> Beyond that, I am not sure. This may be the first documented case of  
> compiling PD OSX with Jack. Something to tell your grandkids about...  
> ;-)
No... You must made some little mods in the makefile and all will  
work.. I've already done this...
lrt is a linux library and you must remove it from the makefile, and  
also you must remove a file.
btw you can download pd 0.37 compiled here:  
http://www.meskalina.it/elementicaotici/dev/downloads/pd-0.37-0- 
Jack.zip

Johnny from jackosx
...
>
> best,
> D.
>
> jmfernandez1 at free.fr wrote:
>
>> I try to build pd with jack support. The ./configure --enable-jack  
>> seems to work but when I run the  "make" in the console I have:
> <snip!>
>> ld: can't locate file for: -lrt
>> make: *** [../bin/pd] Error 1
>
>
> -- 
> derek holzer ::: http://www.umatic.nl
> ---Oblique Strategy # 91:
> "Infinitesimal gradations"
>
>
> _______________________________________________
> PD-list mailing list
> PD-list at iem.at
> http://iem.at/cgi-bin/mailman/listinfo/pd-list
>