[PD] Quest for usb-audio:linux 2.6.3

thewade pdman at aproximation.org
Sun Feb 29 20:13:49 CET 2004


Firstly I want to thank you all for your help in saving me hours of work. Thank you, this list and the people on it are an invaluable resource, a really good community of people.

I am running fedora core 2 test 1 and I just built and installed the newest kernel 2.6.3 (not patched to 2.6.4, but I hope I wont have too...). I feel powerless to get my Maudio duo working with this kernel as the drivers are built in to the kernel. I assumed that the new /etc/modules.conf is now /etc/modprobe.conf and I edited the file to look like this:

#------/etc/modprobe.conf------------#
alias eth0 e100

include /etc/modprobe.conf.dist
install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
alias usb-controller uhci-hcd
alias ieee1394-controller ohci1394
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 1.0.2 ---
alias snd-card-0 snd-maestro3
alias sound-slot-0 snd-maestro3
alias sound-slot-1 snd-usb-audio
# --- END: Generated by ALSACONF, do not edit. ---

but I still get these errors when I start the duo:

#-------tail -f /var/log/messages-------#
Feb 29 12:01:01 transport kernel: usb 1-1.4: new full speed USB device using address 12
Feb 29 12:01:01 transport kernel: drivers/usb/core/config.c: invalid alternate setting 3 for interface 1
Feb 29 12:01:01 transport kernel: usb 1-1.4: can\'t read configurations, error -22
Feb 29 12:01:01 transport kernel: usb 1-1.4: new full speed USB device using address 13
Feb 29 12:01:01 transport kernel: drivers/usb/core/config.c: invalid alternate setting 3 for interface 1
Feb 29 12:01:01 transport kernel: usb 1-1.4: can\'t read configurations, error -22

How do I get the duo to work? Has anyone tackled this yet? My next question is about the usb midisport 2x2, but I imagine that getting the duo set up will answer that question as well...

Has anyone had, or till has, this problem?

Im going to reboot to see if that helps, but my experence with linux says that it wont...

Thanks,
-thewade




More information about the Pd-list mailing list