[PD] [hid] 0.6 released

[patrick]

hi hans,

i'm trying your new hid to make it work with the multio of christian
klippel. here's what i get when i plug the iobox in my computer (gentoo,
2.6.12)


ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00100303
PRSC LSDA PPS PES CCS
usb 2-2: new low speed USB device using ohci_hcd and address 4
ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00100303
PRSC LSDA PPS PES CCS
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: multI/O Box
usb 2-2: Manufacturer: mamalala.de
usb 2-2: SerialNumber: Verrsion 0.01
usb 2-2: hotplug
usb 2-2: configuration #1 chosen from 2 choices
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usbhid 2-2:1.0: usb_probe_interface
usbhid 2-2:1.0: usb_probe_interface - got id
input: USB HID v1.00 Multi-Axis Controller [mamalala.de multI/O Box] on
usb-0000:00:03.0-2
usb 2-2:1.0: hotplug
hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0004


then, i had to do a chmod 666 /dev/input/event*. using lsevent:

./lsevent
Compiled with EV_VERSION 0x10000
Nothing on /dev/input/event0.
Nothing on /dev/input/event1.
Nothing on /dev/input/event2.
Nothing on /dev/input/event3.
Nothing on /dev/input/event4.
Nothing on /dev/input/event5.
Nothing on /dev/input/event6.
Nothing on /dev/input/event7.


a question: does your object need libusb?

is this normal:
cat /dev/input/event0
cat: /dev/input/event0: No such device

thank you hans!
pat