[PD] comport in Win XP "Write error, maybe TX-OVERRUNS on serial line"

[Jaime Villarreal]

Thank you Hans and John. I installed the newer version and now my simple
patch is working correctly.

On 7/18/06, Hans-Christoph Steiner <hans at eds.org> wrote:
>
>
> Sounds like you are using an old version of [comport].  A much more recent
> version is included in the next test release:
>
> http://at.or.at/hans/pd/installers.html
>
> .hc
>
> On Jul 18, 2006, at 1:55 PM, Jaime Villarreal wrote:
>
> Hi, I'm new to pd and would like to comunicate via the comport.
> I have a very simple patch which tries to send the number 1 to the comport
> object.
> The comport is configured as follows.
>      comport $1 9600
> Pd reports:
>      Opened serial line device  COM1
> Ok. That's Good. But when I try to send anything I get,
>      Write error, maybe TX-OVERRUNS on serial line
>
> My serial port, COM1, is the FTDI USB serial converter included on the
> arduino microcontroller board. I have been able to comunicate successfully
> through the USB converter with other software so I am sure it is not a
> problem with my converter.
>
> I have taken screenshots of everything that I thought might be related and
> published them here.
>      http://www.intra.org.mx/pd/
>
> If anyone can offer me any advice I'd be very grateful.
> _______________________________________________
> PD-list at iem.at mailing list
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
>
>
> ------------------------------------------------------------------------
>
> Using ReBirth is like trying to play an 808 with a long stick.    -David
> Zicarelli
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20060719/c90ef377/attachment.htm>