[PD] pduino/comport w/ arduino freezes keyboard and trackpad on Macbook

[nick weldin]

If drawing to much power from the usb socket is the problem then you 
need to provide power for the arduino either by going through a 
powered hub, or if you are drawing to much power on the arduino to 
run it off usb switch the power jumper over on the board and provide 
power for the electronics on it seperately, rather than drawing it 
from the usb bus.

HTH

Nick

>Hi HC,
>
>I've had the problem of the USB bus being killed because to much power
>was drawn, but it was because I plugged a pot into the wrong ports.
...snip...
PD-list at iem.at