[PD] looking for open dmx external
jim ruxton
cinetron at passport.ca
Sat Oct 13 19:52:40 CEST 2007
Hi Martin,
Thanks a lot. Sounds like a great solution. I'll give it a try and post
my results.
> Hi Jim,
> I think you could do it using [comport] if you set the baud rate to
> 250000 and 8 data/2 stop bit/no parity..
> With a regular serial port you can't set that particular baud rate but
> I'm guessing that the device will allow that since that's what it's made
> for.
> The "C++ Builder Example V1.41" on the Enttec website does just that.
> http://prdownloads.sourceforge.net/opendmxusb/bc5_dmxusb_soft_141.zip?download
> I recently modified [comport] to accept lists of bytes so you could send
> an entire dmx packet with one message.
>
> Martin
>
> jim ruxton wrote:
> > Hi, does anyone know where I can find an external for the Entec Open DMX
> > USB device, preferably for Linux though I can also use windows if I have
> > to. Thanks.
> > Jim
> >
> >
> > _______________________________________________
> > PD-list at iem.at mailing list
> > UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
> >
> >
>
>
More information about the Pd-list
mailing list