[PD] Camera into linux Linux

brandt at subnet.at brandt at subnet.at
Sun Jun 8 10:30:05 CEST 2008


Hello all

Thanks for the advices, I did an old trick and it worked.I ripped the card
out of the machine, cleaned the contakts and put it back again and it
worked.

onc again thank all of you and the whole list.

der,brandt


Hiya,
>
> Could you test with xawtv to see if you get video from the card?  The blue
> screen is output by the card if there is no video input going into it so
> maybe the problem is with the camera?  Or do you want tv input into it?
> Again, live troubleshooting for something like this so try the irc
> channel.
>
> Cheers,
>
> Alexandre
>
> On Friday 06 June 2008 10:34:14 brandt at subnet.at wrote:
>> Hi thank you. I like that 4in one. But as i am in austie, shipping takes
>> to long time.
>>
>> anyway: I´ve a haupage Wintv, the driver are loaded with modprobe
>> and
>> lsmod shows it correct loaded. if i switch through the channels, it just
>> shows me a blue screen in pdp, and tells me that the frequency is not
>> correct. Also Gem finds it, the same output, in fact nothing.
>>
>> Thank you again
>> der.brandt
>>
>> > On Thursday 05 June 2008 15:22:03 Ctrl Alt Back wrote:
>> >> On Thu, Jun 05, 2008 at 08:59:59PM +0200, brandt at subnet.at wrote:
>> >> > thank you, sincerely
>> >> >
>> >> > I got one but this does not work, can't get any picture. gem and
>> PDP
>> >>
>> >> find
>> >>
>> >> > it but dispkay no picture. and i willing to spent some money, in
>> order
>> >>
>> >> to
>> >>
>> >> > get it work
>> >>
>> >> you have any further details ? like :
>> >> what card you got
>> >> what you are trying with it ?
>> >> driver loaded ?
>> >> try to run tvtime first on your card, go to menu > input
>> configuration,
>> >> select source composite 1, if it works, will work on Pd as well.
>> >
>> > Good advice, these cards are susceptible to electrostatic shock (I
>> have
>> > lost a
>> > couple over the years). I have had success with xawtv to test if video
>> > input
>> > worked.
>> >
>> > You could also try with gridflow.  Do 'lsmod' and see if you have the
>> > 'bttv'
>> > driver loaded. You should also have a device /dev/video0 and make sure
>> > you have the permissions ok... Try the irc channel if you want live
>> > troubleshooting help (irc.freenode.net, channel #dataflow).
>> >
>> > Cheers,
>> >
>> > Alexandre
>>
>> _______________________________________________
>> Pd-list at iem.at mailing list
>> UNSUBSCRIBE and account-management ->
>> http://lists.puredata.info/listinfo/pd-list
>
>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
>






More information about the Pd-list mailing list