[PD] bcr2000 and midi-feedback

[Luigi Rensinghoff]

Am 22.07.2008 um 15:31 schrieb Atte André Jensen:

> Hi
>
> I have assigned a knob on my bcr2000 to a vertical slider in pd. Under
> the sliders properties, I have set send-symbol and receive-symbol to
> "send" and "rec". I then have
>
> [ctlin 1]
> |
> [/ 127]
> |
> [s rec]
>
>
> [r send]
> |
> [* 127]
> |
> [ctlout 1]
>
> This basically works, the upper one is receiving from the bcr and  
> moving
> the fader in pd, the lower one is updating the display on the bcr when
> the knob is moved in pd.
>
> The problem is that pd sends it's send-symbol, even if the fader is
> moved as a result of the receive-symbol. This means that the bcr get's
> the value right back, with a small delay, which causes the whole to be
> very reluctent to accept movements from the bcr.
>
> I could make some logic that doesn't send the value back if it was
> received from midi, but thought I'd ask if there was a simpler  
> solution?

i cant think of any....

probably you need to pit the send and receive out of the slider and  
do something

with "t b b" and "spigot"...

but that would be what you call the "logic"....

cheers luigi

> For instance is it possible to have pd's knobs *not* send it's
> send-symbol if the fader was moved as a result of a receive-symbol?
>
> -- 
> peace, love & harmony
> Atte
>
> http://atte.dk       | http://myspace.com/attejensen
> http://anagrammer.dk | http://modlys.dk
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management -> http://lists.puredata.info/ 
> listinfo/pd-list
>

 >---------------------------------------<

Luigi Rensinghoff
luigi.rensinghoff at freenet.de
skype:gigischinke
ichat:gigicarlo




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20080722/6fe17c54/attachment.htm>