[PD] enttec dmx usb pro pd linux

[Erich Berger]

to give some more info:

i had success with wtf2osc which includes a
python script osc2dmx.enttec.py, which is
able to open my device and via osc i am able
to send.

i belief the problem is that dmx512 tries to open
/dev/dmx but my dmx controller is on /dev/ttyUSB0.

erich



---------------------
http://randomseed.org

On Thu, 20 Nov 2008, Erich Berger wrote:

> hello,
>
> i ll try to get the enttec dmx usb pro to work under linux
> ubuntu 7.10 and pd.
>
> i followed the instructions of iohannes in dmx512 .
> everything compiled fine.
> but i am not able to open the enttec.
>
> plugin in and dmesg:
>
> [ 1332.756000] usb 3-1: new full speed USB device using uhci_hcd and
> address 3
> [ 1332.952000] usb 3-1: configuration #1 chosen from 1 choice
> [ 1333.372000] usbcore: registered new interface driver usbserial
> [ 1333.372000]
> /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c:
> USB Serial support registered for generic
> [ 1333.372000] usbcore: registered new interface driver usbserial_generic
> [ 1333.372000]
> /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c:
> USB Serial Driver core
> [ 1333.404000]
> /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c:
> USB Serial support registered for FTDI USB Serial Device
> [ 1333.404000] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
> [ 1333.404000]
> /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c:
> Detected FT232RL
> [ 1333.404000] usb 3-1: FTDI USB Serial Device converter now attached to
> ttyUSB0
> [ 1333.404000] usbcore: registered new interface driver ftdi_sio
> [ 1333.404000]
> /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c:
> v1.4.3:USB FTDI Serial Converters Driver
> [ 1333.532000] dmxdev 2.6 compiled for Linux 2.6.22-15-generic Copyright
> (c) 1998-2005 by Michael Stickel
> [ 1333.532000] dmxdev: 20 universes for input / 20 universes for output
> [ 1333.532000] dmxdev: registration of dmx succeded
> [ 1333.532000] dmxdev: registration of dmxin succeded
> [ 1333.532000] dmxdev: proc entries created
> [ 1333.548000] ftdi2dmx: no version for "dmx_find_driver" found: kernel
> tainted.
> [ 1333.548000] family USB created
> [ 1333.548000] dmx-driver ftdi2dmx created
> [ 1333.548000] usbcore: registered new interface driver FTDI2DMX
> [ 1333.548000]
> /home/erich/software/dmx4linux-2.6.1/drivers/devices/usb/ftdi2dmx.c:
> FTDI2DMX registered.
>
> plugin in and out again and dmesg:
>
> [ 1639.956000] usb 3-1: USB disconnect, address 3
> [ 1639.956000] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
> disconnected from ttyUSB0
> [ 1639.956000] ftdi_sio 3-1:1.0: device disconnected
> [ 1642.212000] usb 3-1: new full speed USB device using uhci_hcd and
> address 4
> [ 1642.404000] usb 3-1: configuration #1 chosen from 1 choice
> [ 1642.408000] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
> [ 1642.408000]
> /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c:
> Detected FT232RL
> [ 1642.408000] usb 3-1: FTDI USB Serial Device converter now attached to
> ttyUSB0
>
> when u ise dmxconsole or pd and dmesg it gives an additional:
>
> [ 1714.280000] dmxdev: opening as DMXFI_DMXOUT
>
> but i never get the green lamp on the device blinking, so it is
> not initialized.
>
> i also tried to use the dmx_usb driver from Erwin Rol
> also without success (it creates an additional /dev/dmx0,
> which i could not access).
>
> anybody a hint how i could proceed ?
>
> thx
>
> erich
>
> ---------------------
> http://randomseed.org
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
>