[PD] Floats and negative numbers over OSC

[Georg Werner]

Hi,

i tried your patch on winxp just with udpsend and had the same problems:
error: udpsend_send: item 0 (-1.000000) is not between 0 and 255
error: udpsend_send: item 0 (1.100000) is not an integer
so maybe the problem is not OSC but UDP? as it seems to handle only 
single bytes.
So my question how to send a -1.1 over UDP?
g.


PSPunch schrieb:
> 
> Hi Martin,
> 
> 
> Thank you for your response.
> 
> I am attaching the patch used to produce the following results.
> 
> This was tested on
> Pd version 0.41.4-extended,
> running on WinXP SP3.
> 
> 
> The OSC data were sent by GlovePIE running the following code.
> 
> -------
> SendOSC("127.0.0.1", 9997, "/test", 0)
> wait 1 second
> SendOSC("127.0.0.1", 9997, "/test", 1.5)
> wait 1 second
> SendOSC("127.0.0.1", 9997, "/test", -1)
> wait 1 second
> -------
> 
> 
> 
> 
> I was expecting [routeOSC] to output 0, 1.5, -1.
> 
> 
> --- Output ---
> 
> raw: 47 116 101 115 116 0 0 0 44 105 0 0 0 0 0 0
> unpacked: /test 0
> routed: 0
> 
> raw: 47 116 101 115 116 0 0 0 44 102 0 0 63 63 0 0
> unpacked: /test 0.746094
> routed: 0.746094
> 
> raw: 47 116 101 115 116 0 0 0 44 105 0 0 63 63 63 63
> unpacked: /test 1.06111e+009
> routed: 1.06111e+009
> 
> 
> 
> Thank you again for your help.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list