[PD] arduino and digital outputs
Ricardo Lameiro
ricardolameiro at gmail.com
Wed May 19 19:07:49 CEST 2010
As far as I know, the pduino is not made for the arduino mega. so it could
work, but you need to test it out. also the firmata firmware would need also
some tweak since the mega has more outputs/inputs and analog ports
2010/5/19 Andres Ferrari <anfex at yahoo.com>
> hello,
> When I use the abstraction [arduino] or [comport] object
> the numbers of the digital outputs (pins) of the arduino hardware
> don't match with the output's numbers of the patch.
>
> for example, when i send 1 to digital output "12" from puredata the led
> connected to digital out 12 don't turn on but ...but turn on in digital out
> "14"...
>
> only works pins from 10- 13 but 0- 9 dont't work.
>
> When I've tested from the arduino's software with a sketch there aren't any
> problem, all works fine.
>
> Is it a [comport]r or "Firmata" problem?
> I have osx 10.5 and arduino mega.
>
> Any suggestions?.....thanks a lot!!!
>
>
> Andrés Ferrari G.
>
> http://www.myspace.com/anfex
>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
>
>
--
Fagote / Contrafagote
Bassoon / Contra-bassoon
http://myspace.com/ricardolameiro
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20100519/25bfbf5d/attachment.htm>
More information about the Pd-list
mailing list