[PD] earplug~ with other HRTF

Tue May 25 18:37:11 CEST 2010

I haven't used earplug~ for a long time but if I remember correctly it
was loading the HRIR coefficients from a text file, so you can
probably replace them with your own set. Of course it has to be the
same samplerate and length, and probably the same azimuth and
elevations.. There are some other alternatives such as CW_binaural~
using the IRCAM set, but you can probably replace it again, and IEM's
bin_ambi library (binaural through ambisonic virtual loudspeakers
spatialisation). I found CW_binaural~ more effective and the
externalisation was much better, but the IRCAM set sounded more
coloured than the MIT one. It is not in pd-extended yet (check this
list for its release).

aKis

On 24 May 2010 21:33, Julian Villegas <julovi at yahoo.com> wrote:
> Hi,
>
> could anybody tell me how to use earplug~ with a different HRTF set of measurements? I understand that the distributed version works with the MIT KEMAR set. I'd like to use a different set, measured closer to the head of the listener.
>
> Thank you!
>
>  Julian Villegas, Ph.D.
> http://julovi.net
>
>
> Me pregunto de un modo pensativo
> Que significa ser Colombiano?
> No se le respondi. Es un acto de fe
> JLB.
>
>
>
> ----- Original Message ----
>> From: "pd-list-request at iem.at" <pd-list-request at iem.at>
>> To: pd-list at iem.at
>> Sent: Mon, May 24, 2010 7:00:01 PM
>> Subject: Pd-list Digest, Vol 62, Issue 124
>>
>> Send Pd-list mailing list submissions to
>
>> ymailto="mailto:pd-list at iem.at"
>> href="mailto:pd-list at iem.at">pd-list at iem.at
>
> To subscribe or
>> unsubscribe via the World Wide Web, visit
>
>> href="http://lists.puredata.info/listinfo/pd-list" target=_blank
>> >http://lists.puredata.info/listinfo/pd-list
> or, via email, send a
>> message with subject or body 'help' to
>
>> ymailto="mailto:pd-list-request at iem.at"
>> href="mailto:pd-list-request at iem.at">pd-list-request at iem.at
>
> You can
>> reach the person managing the list at
>
>> ymailto="mailto:pd-list-owner at iem.at"
>> href="mailto:pd-list-owner at iem.at">pd-list-owner at iem.at
>
> When
>> replying, please edit your Subject line so it is more specific
> than "Re:
>> Contents of Pd-list digest..."
>
>
> Today's Topics:
>
>   1. Re:
>> "Scripting languages" ? (
>> href="mailto:ydegoyon at gmail.com">ydegoyon at gmail.com)
>   2. Re:
>> loading an .aif file into an array (Andrew
>> Faraday)
>
>
> ----------------------------------------------------------------------
>
> Message:
>> 1
> Date: Mon, 24 May 2010 08:09:16 +0200
> From: "
>> ymailto="mailto:ydegoyon at gmail.com"
>> href="mailto:ydegoyon at gmail.com">ydegoyon at gmail.com" <
>> ymailto="mailto:ydegoyon at gmail.com"
>> href="mailto:ydegoyon at gmail.com">ydegoyon at gmail.com>
> Subject: Re: [PD]
>> "Scripting languages" ?
> To: Mathieu Bouchard <
>> ymailto="mailto:matju at artengine.ca"
>> href="mailto:matju at artengine.ca">matju at artengine.ca>
> Cc: pd-list
>> <
>> href="mailto:pd-list at iem.at">pd-list at iem.at>, chrism <
>> ymailto="mailto:chris at mccormick.cx"
>> href="mailto:chris at mccormick.cx">chris at mccormick.cx>
> Message-ID:
>> <
>> href="mailto:4BFA180C.1040302 at gmail.com">4BFA180C.1040302 at gmail.com>
> Content-Type:
>> text/plain; charset=ISO-8859-1; format=flowed
>
>
>>
>>
>>
>> That was a few years after a fellow undergrad student (at a different
>>
>> university) told me, very lucidly : ? Now I understand what is
>>
>> pseudo-code. It's code that doesn't work ? (loosely translated from
>>
>> French). That's because pseudo-code is designed to be non-runnable.
>>
> i
>> thin k YOU fa.i.l.ed in that case and not your
>> student
> hihi
>
> sevil
>
>
>
> ------------------------------
>
> Message:
>> 2
> Date: Mon, 24 May 2010 08:23:19 +0100
> From: Andrew Faraday <
>> ymailto="mailto:jbturgid at hotmail.com"
>> href="mailto:jbturgid at hotmail.com">jbturgid at hotmail.com>
> Subject: Re:
>> [PD] loading an .aif file into an array
> To: <
>> ymailto="mailto:cccadavid at hotmail.com"
>> href="mailto:cccadavid at hotmail.com">cccadavid at hotmail.com>, <
>> ymailto="mailto:pd-list at iem.at"
>> href="mailto:pd-list at iem.at">pd-list at iem.at>
> Message-ID: <
>> ymailto="mailto:COL120-W65C7E0FCDC6E98180F59A3DEE70 at phx.gbl"
>> href="mailto:COL120-W65C7E0FCDC6E98180F59A3DEE70 at phx.gbl">COL120-W65C7E0FCDC6E98180F59A3DEE70 at phx.gbl>
> Content-Type:
>> text/plain; charset="iso-8859-1"
>
>
> a few little problems with
>> this
> Firstly, the flag is -resize, you've put the dash after read. Also there
>> seems to be a space in your filename, that always makes it tricky to refer to.
>> Also check capitalization is right. If the underscore's in your file name, it
>> should be in the tag. so:
> [read -resize filename arrayname(
> There's also
>> some bits to get used to with the filepath, I can't remember off hand but I
>> think to start from your home directory the file path should start with a / . If
>> the file is in the same directory as your patch you can always write it's name
>> without a file path. Also you can simplify this sightly by using [openpanel]
>> like this:
> [O] (gui bang)|
> [openpanel]|[read -resize $1
>> Bajo(|[soundfiler]
> By clicking the bang you should be able to navigate to
>> your file and then load it to your array.
> Hope this helps
> Andrew
> From:
>>
>> href="mailto:cccadavid at hotmail.com">cccadavid at hotmail.com
> To:
>> ymailto="mailto:pd-list at iem.at"
>> href="mailto:pd-list at iem.at">pd-list at iem.at
> Date: Sun, 23 May 2010
>> 18:25:08 -0500
> Subject: [PD] loading an .aif file into an
>> array
>
>
>
>
>
>
>
>
> Hi, I do not know the protocol to open
>> an .aif file in MAC OSX 10.6.4. My current attempts are using a message that
>> reads: read- resize camilocadavid/Secuencias/Bajo_fiesta1 80.aif Bajo. This
>> message is connected to the soundfiler's input. The array I created is called
>> Bajo. The thing is I dont know which size should the array have.
> the
>> underline between Bajo_fiesta is a space. Should it go, shouldnt it?It is pretty
>> simple, but couldnt figure it out.Thanks
>>
> Get
>> news, entertainment and everything you care about at Live.com. Check it out!
>>
>>
>>
> _________________________________________________________________
>
>> href="http://clk.atdmt.com/UKM/go/195013117/direct/01/" target=_blank
>> >http://clk.atdmt.com/UKM/go/195013117/direct/01/
> -------------- next
>> part --------------
> An HTML attachment was scrubbed...
> URL: <
>> href="http://lists.puredata.info/pipermail/pd-list/attachments/20100524/a14dbd2b/attachment.html"
>> target=_blank
>> >http://lists.puredata.info/pipermail/pd-list/attachments/20100524/a14dbd2b/attachment.html>
>
> ------------------------------
>
> _______________________________________________
> Pd-list
>> mailing list
>
>> href="mailto:Pd-list at iem.at">Pd-list at iem.at
> to manage your subscription
>> (including un-subscription) see
>
>> href="http://lists.puredata.info/listinfo/pd-list" target=_blank
>> >http://lists.puredata.info/listinfo/pd-list
>
>
> End of Pd-list
>> Digest, Vol 62, Issue 124
> ****************************************
>
>
>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
>