[PD] Playing and recording simultaneously
Martin Peach
martin.peach at sympatico.ca
Sun Jul 4 23:40:26 CEST 2010
Henrique wrote:
> But, in order to the IR estimation be correct, there must be a
> synchronization between the clock frequencies of the: (1) D/A converter
> at the output generator and the (2) A/D converter on the input recorder.
> If the "sampling ticks" of these clocks are not (at least approximately)
> synchronized, then a significant error is expected on the estimate.
As long as they are on the same card, they will be in perfect sync at
the clock level unless you have some really unusual hardware. This is
because the same clock is used for A/D and D/A. Usually they are on the
same chip and the data from the ADC is clocked out using the same clock
that loads the DAC.
Martin
More information about the Pd-list
mailing list