[PD] pduino + arduino UNO
Jose Luis Santorcuato
santorcuato76 at gmail.com
Tue Oct 19 07:09:10 CEST 2010
HI, I have no arduino one hand, you could try installing the latest Arduino
IDE, is for the UNO plate.
I noticed that in 2.1 are defined Firmat chipset ATMEGA xxx in the file
named firmata.h chipsets there are defined outputs and inputs, not sure, but
could include a chip or model, remember that the FTDI system but not necessary
with an Arduino UNO.
The Uno differs from all preceding boards in that it does not use the FTDI
USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as
a USB-to-serial converter. (arduino.cc)
Below define of plates, chips and inputs/outputs
Try de solutions and keep working
José
==============================================================================
* MACROS
*============================================================================*/
/* shortcut for setFirmwareNameAndVersion() that uses __FILE__ to set the
* firmware name. It needs to be a macro so that __FILE__ is included in
the
* firmware source file rather than the library source file.
*/
#define setFirmwareVersion(x, y) setFirmwareNameAndVersion(__FILE__, x, y)
// total number of pins currently supported
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) // Arduino NG
and Diecimila
#define TOTAL_ANALOG_PINS 8
#define TOTAL_DIGITAL_PINS 22 // 14 digital + 8 analog
#define TOTAL_PORTS 3 // total number of ports for the board
#define ANALOG_PORT 2 // port# of analog used as digital
#define FIRST_ANALOG_PIN 14 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 13 // digital pin to blink version on
#define FIRST_SERVO_PIN 2 // pin# of the first servo pin
#elif defined(__AVR_ATmega8__) // old Arduinos
#define TOTAL_ANALOG_PINS 6
#define TOTAL_DIGITAL_PINS 20 // 14 digital + 6 analog
#define TOTAL_PORTS 3 // total number of ports for the board
#define ANALOG_PORT 2 // port# of analog used as digital
#define FIRST_ANALOG_PIN 14 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 13 // digital pin to blink version on
#define FIRST_SERVO_PIN 2 // pin# of the first servo pin
#elif defined(__AVR_ATmega1280__)// Arduino Mega
#define TOTAL_ANALOG_PINS 16
#define TOTAL_DIGITAL_PINS 70 // 54 digital + 16 analog
#define TOTAL_PORTS 9 // total number of ports for the board
#define ANALOG_PORT 8 // port# of analog used as digital
#define FIRST_ANALOG_PIN 54 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 13 // digital pin to blink version on
#define FIRST_SERVO_PIN 2 // pin# of the first servo pin
#elif defined(__AVR_ATmega128__)// Wiring
#define TOTAL_ANALOG_PINS 8
#define TOTAL_DIGITAL_PINS 51
#define TOTAL_PORTS 7 // total number of ports for the board
#define ANALOG_PORT 5 // port# of analog used as digital
#define FIRST_ANALOG_PIN 40 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 48 // digital pin to blink version on
#define FIRST_SERVO_PIN 8 // pin# of the first servo pin
#elif defined(__AVR_AT90USB162__) // Teensy
#define TOTAL_ANALOG_PINS 0
#define TOTAL_DIGITAL_PINS 21 // 21 digital + no analog
#define TOTAL_PORTS 4 // total number of ports for the board
#define ANALOG_PORT 3 // port# of analog used as digital
#define FIRST_ANALOG_PIN 21 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 6 // digital pin to blink version on
#elif defined(__AVR_ATmega32U4__) // Teensy
#define TOTAL_ANALOG_PINS 12
#define TOTAL_DIGITAL_PINS 25 // 11 digital + 12 analog
#define TOTAL_PORTS 4 // total number of ports for the board
#define ANALOG_PORT 3 // port# of analog used as digital
#define FIRST_ANALOG_PIN 11 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 11 // digital pin to blink version on
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) //
Teensy++
#define TOTAL_ANALOG_PINS 8
#define TOTAL_DIGITAL_PINS 46 // 38 digital + 8 analog
#define TOTAL_PORTS 6 // total number of ports for the board
#define ANALOG_PORT 5 // port# of analog used as digital
#define FIRST_ANALOG_PIN 38 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 6 // digital pin to blink version on
#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__) // Sanguino
#define TOTAL_ANALOG_PINS 8
#define TOTAL_DIGITAL_PINS 32 // 24 digital + 8 analog
#define TOTAL_PORTS 4 // total number of ports for the board
#define ANALOG_PORT 3 // port# of analog used as digital
#define FIRST_ANALOG_PIN 24 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 0 // digital pin to blink version on
#elif defined(__AVR_ATmega645__) // Illuminato
#define TOTAL_ANALOG_PINS 6
#define TOTAL_DIGITAL_PINS 42 // 36 digital + 6 analog
#define TOTAL_PORTS 6 // total number of ports for the board
#define ANALOG_PORT 4 // port# of analog used as digital
#define FIRST_ANALOG_PIN 36 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 13 // digital pin to blink version on
#else // anything else
#define TOTAL_ANALOG_PINS 6
#define TOTAL_DIGITAL_PINS 14
#define TOTAL_PORTS 3 // total number of ports for the board
#define ANALOG_PORT 2 // port# of analog used as digital
#define FIRST_ANALOG_PIN 14 // pin# corresponding to analog 0
#define VERSION_BLINK_PIN 13 // digital pin to blink version on
#endif
#endif /* Firmata_h */
2010/10/18 tim vets <timvets at gmail.com>
> from http://arduino.cc/en/Main/Hardware :
> "It is similar to the Duemilanove, but has a different USB-to-serial chip
> the ATMega8U2"
> may have something to do with it...?
> gr,
> Tim
>
>
> 2010/10/18 alessandro contini <aless.contini at gmail.com>
>
>> hey there,
>> i'm teaching in an intensive course about Arduino in an italian design
>> school.
>>
>> some of the students are using Pduino for their final projects.
>> the point is i have a student who bought the new Arduino UNO board, we
>> tried to use it with Firmata 2.2 and Pduino, but it doesn't work.
>> when loading the arduino-test it loads only a part of the patch in the
>> console view. it recognizes the board as an Arduino UNO, but then it says
>> "can't create"
>>
>> i tried to search for the problem with google, but we haven't found
>> anything useful.
>> maybe someone encountered a similar problem? :)
>>
>>
>> alessandro contini + www.cntlsn.com
>>
>> _______________________________________________
>> Pd-list at iem.at mailing list
>> UNSUBSCRIBE and account-management ->
>> http://lists.puredata.info/listinfo/pd-list
>>
>>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
>
>
--
http://arselectronicachile.blogspot.com
http://www.myspace.com/santorcuato
http://comunicacionnativa.blogspot.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20101019/d77c2f72/attachment-0001.htm>
More information about the Pd-list
mailing list