[PD] multiple arduinos

[olsen]

Hi

if you're running on Linux check the [ADDITIONAL-INFOS] in the arduino-help.pd on the upper right corner in the 
pd-rewrite: https://github.com/reduzent/pduino
as mentioned below the infos you'll find there are basically from http://answers.ros.org/answers/101/revisions/
with this method you can connect the arduino within pd due to its serial adress avoiding id-conflicts.

hope this helps
ø


On 09/06/2011 09:27 PM, tim vets wrote:
> We have an installation running at www.verbekefoundation.com <http://www.verbekefoundation.com> with two arduino's and
> pd for several years now.
> The only thing that fries now and then are the power supplies.
> iirc, it's just a matter of sending the right [devicename <name_of_device>( to the two [comport], ( or [arduino] ?) objects.
> You can get those devicenames by doing "ls /dev/ttyU*", which will give you something like /dev/ttyUSB0 and
> /dev/ttyUSB1, representing the two arduino's.
> (under the assumption that the newer arduino models still work the same way.)
> gr,
> Tim
>
> 2011/9/6 FernandoG <dataferx at gmail.com <mailto:dataferx at gmail.com>>
>
>     Hi
>
>     Anybody knows if its posible to use multiple arduinos ( 2 or 3 arduino mega) with the same pduino based puredata patch?
>
>     Thanks!
>
>     F
>
>     _______________________________________________
>     Pd-list at iem.at <mailto:Pd-list at iem.at> mailing list
>     UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
>
>
>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management ->  http://lists.puredata.info/listinfo/pd-list

-- 
ETs DNA will not be televised
http://hasa-labs.org