[PD] fux_kinect

[tim vets]

a few more attempts, I have it working once again,
with dropped frames.
...
Stream 70] Expected 1748 data bytes, but got 948
[Stream 70] Expected max 1748 data bytes, but got 1908. Dropping...
[Stream 80] Expected 1908 data bytes, but got 948
[Stream 80] Expected 1908 data bytes, but got 948
[Stream 70] Expected 1748 data bytes, but got 948
[Stream 80] Expected 1908 data bytes, but got 948
[Stream 70] Expected 1748 data bytes, but got 948
[Stream 70] Expected max 1748 data bytes, but got 1908. Dropping...
[Stream 80] Expected 1908 data bytes, but got 948
[Stream 80] Expected 1908 data bytes, but got 948
[Stream 70] Expected 1748 data bytes, but got 948
[Stream 70] Expected max 1748 data bytes, but got 1908. Dropping...
[Stream 80] Expected 1908 data bytes, but got 948
[Stream 70] Expected max 1748 data bytes, but got 1908. Dropping...
[Stream 80] Expected 1908 data bytes, but got 948
[Stream 70] Expected 1748 data bytes, but got 948
[Stream 70] Expected max 1748 data bytes, but got 1908. Dropping...
[Stream 80] Expected 1908 data bytes, but got 948
[Stream 80] Expected 1908
...
gr,
Tim

2011/11/14 tim vets <timvets at gmail.com>

> Hi all,
> I tested with fux_kinect and a kinect connected now. Some results:
> on the first test, fux_kinect-help.pd opens and the depth image appears,
> though with some glitches/flickering (scrambled frames now and then)
> The tilting also works.
> Upon closing the patch, pd crashes.
> On a second attempt (after this crash), the help patch freezes instantly.
> Only the first frame of the depth image appears, and then pd hangs.
> Attached is the output of "valgrind --leak-check=full pdextended" and
> opening fux_kinect-help.pd.
> Let me know if there's any more useful info I can produce.
> gr,
> Tim
>
>
> 2011/11/12 tim vets <timvets at gmail.com>
>
>> in case anyone wants to try
>>
>>
>> 2011/11/12 tim vets <timvets at gmail.com>
>>
>>>
>>>
>>> 2011/11/12 Mathieu Bouchard <matju at artengine.ca>
>>>
>>>> Le 2011-11-12 à 18:56:00, tim vets a écrit :
>>>>
>>>>
>>>>  it's stretching my knowledge quite far now,
>>>>> but gave it a shot anyway, and interpreted what you wrote as:
>>>>> find the line " gl_frame_cond = (pthread_cond_t)
>>>>> malloc(sizeof(pthread_mutex_t)**);"
>>>>> (in fux_kinect.cpp)
>>>>> and remove the "*" from that line.
>>>>>
>>>>
>>>> Ok, never mind removing "*", put it back and just replace the struct
>>>> name so that it matches :
>>>>
>>>>   gl_frame_cond = (pthread_cond_t *) malloc(sizeof(pthread_cond_t))**;
>>>>
>>>>
>>>>  or am I getting it wrong?
>>>>>
>>>>
>>>> Yes... and it's more changes than what I had listed... so nevermind
>>>> that one. But surely the author would know what I mean.
>>>>
>>>> In the meantime, let's stick to the shortest possible fix.
>>>>
>>>> bingo
>>> thanks :)
>>> can't test with the Kinect connected yet though...
>>> but at least pd does not hang anymore but instead just reports:
>>> [fux_kinect]: kinect initiated
>>> [fux_kinect]: Number of devices found: 0
>>> [fux_kinect]: Could not open device
>>>  gr,
>>> Tim
>>>
>>>
>>>>  ______________________________**______________________________**
>>>> __________
>>>> | Mathieu BOUCHARD ----- téléphone : +1.514.383.3801 ----- Montréal, QC
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20111114/9683599a/attachment.htm>