[PD] arduino question

[Dafydd Hughes]

Try this.

On Fri, Nov 25, 2011 at 12:19 AM, Pagano, Patrick <pat at digitalworlds.ufl.edu
> wrote:

>  Yes.
>
> r_ANA_0
>
> i assume it sees it as constantly sending something but i do not know how
> to control it.
>
> pp
>
>  ------------------------------
> *From:* Dafydd Hughes [dafydd61 at gmail.com]
> *Sent:* Friday, November 25, 2011 12:18 AM
>
> *To:* Pagano, Patrick
> *Cc:* pd-list at iem.at
> *Subject:* Re: [PD] arduino question
>
>  Oh cool - is this your stuff coming out of ANA_0?
>
> On Fri, Nov 25, 2011 at 12:16 AM, Pagano, Patrick <
> pat at digitalworlds.ufl.edu> wrote:
>
>>  it's a number box that is constantly sending 0 or 1 depending on
>> whether the sensor is on or off.
>>
>> the value is a constant stream and i am just unsure how to just get ONE
>> bang when it's turned on and  ignore the 0 bang when it turns off.
>>
>>
>>  ------------------------------
>> *From:* Dafydd Hughes [dafydd61 at gmail.com]
>> *Sent:* Friday, November 25, 2011 12:12 AM
>>
>> *To:* Pagano, Patrick
>> *Cc:* pd-list at iem.at
>> *Subject:* Re: [PD] arduino question
>>
>>   Hi Patrick
>>
>>  Do you mean you only want a bang when the sensor turns on?
>>
>>  What do the messages look like coming from the arduino? What is that
>> second value?
>>
>>  I hope I'm able to help here!
>>
>>  cheers
>> dafydd
>>
>> On Fri, Nov 25, 2011 at 12:04 AM, Pagano, Patrick <
>> pat at digitalworlds.ufl.edu> wrote:
>>
>>>  Kind of. I am still a newbie to this but i have been using
>>> pduino_playaround.
>>> So are you suggesting removing the second value that is sent by Arduino?
>>> What is happening is that pd receives the "on" from the sensor and keeps
>>> baninging until the sensor turns off and then it sends another bang when it
>>> turns off so if the sensor turns it on it eventually bangs again and resets
>>> to 0 again. whereas i just want it to send  bang when it's activated to
>>> play a sound and not band when it's done.
>>>
>>> pp
>>>  ------------------------------
>>> *From:* Dafydd Hughes [dafydd61 at gmail.com]
>>> *Sent:* Friday, November 25, 2011 12:00 AM
>>> *To:* Pagano, Patrick
>>> *Cc:* pd-list at iem.at
>>>
>>> *Subject:* Re: [PD] arduino question
>>>
>>>   You know what? I'm not sure. I've never worked with those sensors.
>>> What do you mean by "message to bang?" are you doing a call-and-response
>>> between Pd and the Arduino?
>>>
>>>  Are you working with this sketch?
>>> http://www.arduino.cc/playground/Code/PIRsense
>>>
>>> On Thu, Nov 24, 2011 at 11:28 PM, Pagano, Patrick <
>>> pat at digitalworlds.ufl.edu> wrote:
>>>
>>>>  that kind of works but after it sends it's message to bang something
>>>> the PIRturns off when the sensor goes "off" and it sends another value is
>>>> there a way to ignore that?
>>>>
>>>> pp
>>>>  ------------------------------
>>>> *From:* Dafydd Hughes [dafydd61 at gmail.com]
>>>> *Sent:* Thursday, November 24, 2011 10:43 PM
>>>> *To:* Pagano, Patrick
>>>> *Subject:* Re: [PD] arduino question
>>>>
>>>>   Hi Patrick
>>>>
>>>>  Are you trying to turn the sample on/off by comparing it to a range?
>>>>
>>>>  If so, have you tried something like:
>>>>
>>>>  [< 0.3]
>>>> |
>>>> [change]
>>>>
>>>>  ?
>>>>
>>>> cheers
>>>> dafydd
>>>>
>>>> On Thu, Nov 24, 2011 at 10:31 PM, Pagano, Patrick <
>>>> pat at digitalworlds.ufl.edu> wrote:
>>>>
>>>>>   Hi
>>>>>
>>>>>  I am using a PIR sensor with pduino playground and I have the sensor
>>>>> picking up movement. It's my first pd-arduino excursion so forgive the
>>>>> noobie-ness. When I get the out form the PIR sensor it give me a constant
>>>>> value of SOMETHING The entire time. It's output values range from
>>>>> 0.13-0.664/0.665 constantly. I just want to use the sensor to turn off/on a
>>>>> sample but the file is constantly being "banged" a value. How do I just out
>>>>> put an on/off based upon  this constant stream of Data? I tried select bit
>>>>> that does seem to be working.
>>>>>
>>>>>  It's a simple parallax PIR sensor and I have been having good luck
>>>>> getting usd to wiring and  the breadboard etc. but when I take the analog0
>>>>> stream/port into pd I do not know how to control that data/
>>>>>
>>>>>  Any help?
>>>>>
>>>>>  pp
>>>>>
>>>>> _______________________________________________
>>>>> Pd-list at iem.at mailing list
>>>>> UNSUBSCRIBE and account-management ->
>>>>> http://lists.puredata.info/listinfo/pd-list
>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20111125/5e310b90/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pduino_playaround_2010_v0.9-dh.pd
Type: application/octet-stream
Size: 46278 bytes
Desc: not available
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20111125/5e310b90/attachment-0001.obj>