[PD] midi problem under osx

[Nicolas Montgermont]

thanks for your reply,
The problem is that midi data is a position feedback for the control of 
a motor, and when msb is stuck, the position command I give is wrong.
I don't think the card is to blame cause the same card/patch/interface 
is working well on win XP.
n

Le 06/02/12 21:57, Jean-Marie Adrien a écrit :
> Hello
> i would try to force synchronization of incoming midi streams inside pure data according to my needs, ie downsampling a little if necessary so that MSB and LSB are consistent ... and give a call to interface-z for feedback.
> cheers
> JM
>
> Le 6 févr. 2012 à 21:15, Nicolas Montgermont a écrit :
>
>> Hello list,
>>
>> I run into a special problem with MIDI input under osx...
>>
>> I am getting some MIDI inside Pd, the MIDI is coming from an interface-z card that is transducing a sensor.
>> The midi info is on two control number for higher (12bit) precision. Sometimes the MSB value is not updated well, but the LSB is, and that gives me weird behaviors.
>>
>> I have tested the same patch with Pd-extended 0.42.5 under mac osx lion and on another computer with osx snow leopard, both have the same problem, but the same patch on a third computer with windows xp is working well.
>> I have tested as well two midi->usb interface (a basic one and a motu micro lite) with the same behavior.
>>
>> So it seems to me that the problem looks like Pd midi driver on osx.
>> I have tested to modify the audio latency, to change the MIDI latency, but that gives me no better result.
>>
>> Do you have an idea of where i can look, or a workaround i can find?
>>
>> Best,
>> n
>> -- 
>> http://nim.on.free.fr
>>
>> _______________________________________________
>> Pd-list at iem.at mailing list
>> UNSUBSCRIBE and account-management ->  http://lists.puredata.info/listinfo/pd-list
>>
>

-- 
http://nim.on.free.fr