[PD] No pitch bend objects working

[Thomas Mayer]

Oh, stupid me. You wrote that in your original message. Forget everything I wrote in this thread.

Best regards,
Thomas

----- Original Message -----
From: andy.friend at gmail.com
To: thomas at residuum.org
Date: 18.10.2012 17:46:52
Subject: Re: Re: Re: [PD] No pitch bend objects working


> For sure - however [bendout] is not working at all.
> 
> It's not Kontakt, as have tested sending from Supercollider and all works
> fine.
> 
> Can anyone else on Windows please confirm this, before I lose my mind :)
> 
> My set: Win 7 x64, PD_Extended 0.42.5, and PD Vanilla 0.43.3, LoopBe1 and
> MIDI Yoke drivers
> 
> 
> 
> On 18 October 2012 16:35, Thomas Mayer <thomas at residuum.org> wrote:
> 
>> Hi Andy,
>> 
>> in that case, you need to use [bendin] and [bendout] instead of [ctlin]
>> and [ctlout]. Pitch bend does not have a CC number (
>> http://www.samplemodeling.com/forum/viewtopic.php?f=2&t=119) and uses a
>> range of 0-16383 instead of 0-127.
>> 
>> Best regards,
>> Thomas
>> 
>> ----- Original Message -----
>> From: andy.friend at gmail.com
>> To: thomas at residuum.org
>> Date: 18.10.2012 16:27:07
>> Subject: Re: Re: [PD] No pitch bend objects working
>> 
>> 
>> > I need to map  to the pitch bend wheel directly - so that it is
>> manipulated
>> > in the external standalone VST, Kontakt.
>> >
>> > There doesn't seem to be an available CC for the pitchbend wheel. Thanks,
>> > but yours appears to just be a stepped workaround.
>> >
>> >
>> > On 18 October 2012 11:49, Thomas Mayer <thomas at residuum.org> wrote:
>> >
>> >> Oh, and that [-] should be a [+] obviously.
>> >>
>> >> ----- Original Message -----
>> >> From: thomas at residuum.org
>> >> To: andy.friend at gmail.com, pd-list at iem.at
>> >> Date: 18.10.2012 12:42:56
>> >> Subject: Re: [PD] No pitch bend objects working
>> >>
>> >>
>> >> > Hi,
>> >> >
>> >> > what do you mean by "pitch bend"? Are you looking for an object that
>> >> applies MIDI pitch bend to MIDI notes? Then see attached patch.
>> >> >
>> >> > If that is not the desired result, then please tell us, what that
>> object
>> >> should do.
>> >> >
>> >> > Best regards,
>> >> > Thomas
>> >> >
>> >> > ----- Original Message -----
>> >> > From: andy.friend at gmail.com
>> >> > To: pd-list at iem.at
>> >> > Date: 18.10.2012 11:25:32
>> >> > Subject: Re: [PD] No pitch bend objects working
>> >> >
>> >> >
>> >> >> Hi,
>> >> >>
>> >> >> Thanks, no - I'm looking for an actual pitch bend object, that
>> works!!!
>> >> >>
>> >> >> I'm shocked that none of them work on Windows......
>> >> >>
>> >> >>
>> >> >>
>> >> >> On 17.10.2012 12:06, Andy Friend wrote:
>> >> >>> Hi guys,
>> >> >>>
>> >> >>> I've tried all the common pitch bend objects: bendout, xbendout, and
>> >> >>> xbendout2 (pitchout doesn't seem to exist anymore).
>> >> >>>
>> >> >>> Midi data is being received by NI Kontakt, but no bending is
>> happening
>> >> >>> (also tested in Realstrat).
>> >> >>>
>> >> >>> This is under Win7 64bit, PD Extended 0.42.5, and PD Vanilla 0.43.3
>> >> >>> (bendout object tested).
>> >> >>>
>> >> >>> I'm pretty desperate here - anyone have any ideas?
>> >> >>
>> >> >> Are you looking for a pitchshift effect? If so, there are two
>> >> >> abstractions for that in my set of abstractions:
>> >> >> https://github.com/residuum/Puredata-abstractions
>> >> >>
>> >> >> Another implementation is available in the examples:
>> >> >> 3.audio.examples/G09.pitchshift.pd
>> >> >>
>> >> >> Best regards,
>> >> >> Thomas
>> >> >> --
>> >> >> "Ich komme aus dem Staunen nicht heraus."
>> >> >> "Dann bleib halt drin, du Seppel"
>> >> >> (Dietmar Dath - Die Abschaffung der Arten)
>> >> >> http://www.residuum.org/
>> >> >> _______________________________________________
>> >> >> Pd-list at iem.at mailing list
>> >> >> UNSUBSCRIBE and account-management ->
>> >> http://lists.puredata.info/listinfo/pd-list
>> >> > _______________________________________________
>> >> > Pd-list at iem.at mailing list
>> >> > UNSUBSCRIBE and account-management ->
>> >> http://lists.puredata.info/listinfo/pd-list
>> >>
>> >>
>> 
>>