[PD] comport questions
Pagano, Patrick
pat at digitalworlds.ufl.edu
Wed Nov 28 23:16:08 CET 2012
The benq tech says it should work for commands. I am going to try with another projector, but I can't believe they would put in an rs232 port only for firmware upgrades?
On Nov 28, 2012, at 3:47 PM, "Martin Peach" <martin.peach at sympatico.ca> wrote:
> It should work. You could try using a terminal program to manually connect. From skimming the manual for that projector it says the RS-232 is for firmware upgrades only...
>
> Martin
>
> On 2012-11-28 14:34, Pagano, Patrick wrote:
>> Hi
>>
>> With the recent talk about comport I have tried to use it to control a
>> BenQ MX660P Projector and I am having no response from the machine.
>>
>> RS-232 protocol
>>
>> Baud Rate
>>
>>
>>
>> 115200 bps (default)
>>
>> Changeable(2400/4800/9600/14400/19200/38400/57600/115200)
>>
>> Setting in OSD menu
>>
>> Data Length
>>
>>
>>
>> 8 bit
>>
>> Parity Check
>>
>>
>>
>> None
>>
>> Stop Bit
>>
>>
>>
>> 1 bit
>>
>> The command to turn it on is:
>>
>> <CR>*pow=on#<CR>
>>
>> But I am getting no response from the machine.
>>
>> I am using the ascii list of bites to send the message, maybe this is
>> incorrect?
>>
>> Perhaps someone may shed some light upon this for me?
>>
>> I am on Windows7, pd 42-5 extended
>>
>> Patrick Pagano, B.S, M.F.A
>>
>> Assistant in Digital Arts and Science
>>
>> Digital Media Projection and Audio Design
>>
>> Digital Worlds Institute
>>
>> University of Florida, USA
>>
>> (352)294-2020
>>
>>
>>
>> _______________________________________________
>> Pd-list at iem.at mailing list
>> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
>>
>
More information about the Pd-list
mailing list