[PD] Raspberry Pi Behringer UCA222 boot problems

Pagano, Patrick pat at digitalworlds.ufl.edu
Sat Jul 27 18:45:16 CEST 2013


I tried too, no luck with sound blaster USB dongles btw

Sent from my iPhone

On Jul 26, 2013, at 6:03 PM, "Dan Wilcox" <danomatika at gmail.com<mailto:danomatika at gmail.com>> wrote:

Simply put, the RPI firmware does not work with USB audio correctly yet. See this thread: http://lists.puredata.info/pipermail/pd-list/2013-07/103261.html

I keep looking for fixes, but the way USB is handled, the only way for it to work without dropouts is to have *nothing* else plugged into the usb bus and ethernet disabled ... sucks.

On Jul 26, 2013, at 5:41 PM, pd-list-request at iem.at<mailto:pd-list-request at iem.at> wrote:

From: John Canning <johnnyboy7777 at hotmail.co.uk<mailto:johnnyboy7777 at hotmail.co.uk>>
Subject: [PD] Raspberry Pi Behringer UCA222 boot problems
Date: July 26, 2013 5:40:49 PM EDT
To: Pure Data <pd-list at iem.at<mailto:pd-list at iem.at>>


Hi Folks,

I have been trying for quite a while to get my Raspberry Pi to work in full duplex with Pd. I have installed the OS on the PdPi site and updated it. I am using a Behringer UCA222 for audio. When I change the USB speed down to 1 (dwc_otg.speed=1) in /boot/cmdline.txt my Pi won't boot with the soundcard plugged in. If I unplug the soundcard the Pi will boot but as soon as I plug it in the Pi crashes. Has anyone got any suggestions about why this is happening?

Thanks,
John

--------
Dan Wilcox
@danomatika
danomatika.com<http://danomatika.com>
robotcowboy.com<http://robotcowboy.com>





_______________________________________________
Pd-list at iem.at<mailto:Pd-list at iem.at> mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20130727/a0a51873/attachment.htm>


More information about the Pd-list mailing list