[PD] Pd-list Digest, Vol 103, Issue 64

[Pierre Castellotti]

Il 14/10/2013 07:29, pd-list-request at iem.at ha scritto:
> Send Pd-list mailing list submissions to
> 	pd-list at iem.at
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.puredata.info/listinfo/pd-list
> or, via email, send a message with subject or body 'help' to
> 	pd-list-request at iem.at
>
> You can reach the person managing the list at
> 	pd-list-owner at iem.at
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Pd-list digest..."
>
>
> Today's Topics:
>
>     1. Re: build pd with jack in raspbian on rpi? (Julian Brooks)
>     2. Re: build pd with jack in raspbian on rpi? (Julian Brooks)
>     3. Re: build pd with jack in raspbian on rpi? (Julian Brooks)
>     4. Re: build pd with jack in raspbian on rpi? (Julian Brooks)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 14 Oct 2013 05:22:57 +0100
> From: Julian Brooks <jbeezez at gmail.com>
> Subject: Re: [PD] build pd with jack in raspbian on rpi?
> To: IOhannes m zm?lnig <zmoelnig at iem.at>
> Cc: PD List <pd-list at iem.at>
> Message-ID:
> 	<CAGemBFSuptgH=8t1Ff5vgz_ug1A3bTxtOb-Zf2nzS6C75SjZkA at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hey again,
>
> Possible issue:
>
> I've installed libjack-dev and Pd builds fine - great.
>
> I did want to have jackd2 but that doesn't have libjack-dev it has
> libjack-jackd2-0.
>
> Pd doesn't configure with jack when this lib is installed.
>
> Does it make a difference to build Pd with libjack-dev (in effect build
> with jackd1 but run with jackd2)?  I mean I guess I'll know if it's
> something obvious but could there be performance issues.
>
>
> Regards,
>
> Julian
>
>
> On 11 October 2013 10:15, Julian Brooks <jbeezez at gmail.com> wrote:
>
>> Great stuff, nice one IOhannes.
>>
>>
>>
>>
>> On 11 October 2013 10:03, IOhannes m zm?lnig <zmoelnig at iem.at> wrote:
>>
>>> On 2013-10-11 09:23, Julian Brooks wrote:
>>>> checking for jack_set_xrun_callback in -ljack... no
>>>> checking for jack_set_error_function in -ljack... no
>>> you have to install libjack-dev.
>>>
>>> a good start to install all/most packages needed to build jack (at least
>>> with the same features as the "puredata" packages) is:
>>>
>>> # aptitude build-dep puredata
>>>
>>> fmgaer
>>> IOhannes
>>>
>>>
>>> _______________________________________________
>>> Pd-list at iem.at mailing list
>>> UNSUBSCRIBE and account-management ->
>>> http://lists.puredata.info/listinfo/pd-list
>>>
>>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20131014/b96e903e/attachment-0001.htm>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 14 Oct 2013 06:08:49 +0100
> From: Julian Brooks <jbeezez at gmail.com>
> Subject: Re: [PD] build pd with jack in raspbian on rpi?
> To: IOhannes m zm?lnig <zmoelnig at iem.at>
> Cc: PD List <pd-list at iem.at>
> Message-ID:
> 	<CAGemBFTZnD4MSrTiGhkF-GKUnotPXWf8UvOCW_33RCBNwV-wVQ at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Pd seems to have built though I'm not sure if there would be some kind of
> 'that's it, your done, nothing to see here, move on' type message.
>
> Anyway, when typing 'pd' on the command line I get this:
> pd: error while loading shared libraries: libportaudio.so.2: cannot open
> shared object file: No such file or directory
>
> Any ideas anyone?
>
>
>
> On 14 October 2013 05:22, Julian Brooks <jbeezez at gmail.com> wrote:
>
>> Hey again,
>>
>> Possible issue:
>>
>> I've installed libjack-dev and Pd builds fine - great.
>>
>> I did want to have jackd2 but that doesn't have libjack-dev it has
>> libjack-jackd2-0.
>>
>> Pd doesn't configure with jack when this lib is installed.
>>
>> Does it make a difference to build Pd with libjack-dev (in effect build
>> with jackd1 but run with jackd2)?  I mean I guess I'll know if it's
>> something obvious but could there be performance issues.
>>
>>
>> Regards,
>>
>> Julian
>>
>>
>> On 11 October 2013 10:15, Julian Brooks <jbeezez at gmail.com> wrote:
>>
>>> Great stuff, nice one IOhannes.
>>>
>>>
>>>
>>>
>>> On 11 October 2013 10:03, IOhannes m zm?lnig <zmoelnig at iem.at> wrote:
>>>
>>>> On 2013-10-11 09:23, Julian Brooks wrote:
>>>>> checking for jack_set_xrun_callback in -ljack... no
>>>>> checking for jack_set_error_function in -ljack... no
>>>> you have to install libjack-dev.
>>>>
>>>> a good start to install all/most packages needed to build jack (at least
>>>> with the same features as the "puredata" packages) is:
>>>>
>>>> # aptitude build-dep puredata
>>>>
>>>> fmgaer
>>>> IOhannes
>>>>
>>>>
>>>> _______________________________________________
>>>> Pd-list at iem.at mailing list
>>>> UNSUBSCRIBE and account-management ->
>>>> http://lists.puredata.info/listinfo/pd-list
>>>>
>>>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20131014/84ea102e/attachment-0001.htm>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 14 Oct 2013 06:13:24 +0100
> From: Julian Brooks <jbeezez at gmail.com>
> Subject: Re: [PD] build pd with jack in raspbian on rpi?
> To: IOhannes m zm?lnig <zmoelnig at iem.at>
> Cc: PD List <pd-list at iem.at>
> Message-ID:
> 	<CAGemBFQkvFyGkuU0ykq=44CAL8-P1a41BmicYj8D9cs3_E=oEw at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Sorry - to be clear, I did:
>
> cd ~/pure-data (after d/l from git)
> ./autogen.sh
> ./configure --enable-jack
> make && sudo make install
>
>
> On 14 October 2013 06:08, Julian Brooks <jbeezez at gmail.com> wrote:
>
>> Pd seems to have built though I'm not sure if there would be some kind of
>> 'that's it, your done, nothing to see here, move on' type message.
>>
>> Anyway, when typing 'pd' on the command line I get this:
>> pd: error while loading shared libraries: libportaudio.so.2: cannot open
>> shared object file: No such file or directory
>>
>> Any ideas anyone?
>>
>>
>>
>> On 14 October 2013 05:22, Julian Brooks <jbeezez at gmail.com> wrote:
>>
>>> Hey again,
>>>
>>> Possible issue:
>>>
>>> I've installed libjack-dev and Pd builds fine - great.
>>>
>>> I did want to have jackd2 but that doesn't have libjack-dev it has
>>> libjack-jackd2-0.
>>>
>>> Pd doesn't configure with jack when this lib is installed.
>>>
>>> Does it make a difference to build Pd with libjack-dev (in effect build
>>> with jackd1 but run with jackd2)?  I mean I guess I'll know if it's
>>> something obvious but could there be performance issues.
>>>
>>>
>>> Regards,
>>>
>>> Julian
>>>
>>>
>>> On 11 October 2013 10:15, Julian Brooks <jbeezez at gmail.com> wrote:
>>>
>>>> Great stuff, nice one IOhannes.
>>>>
>>>>
>>>>
>>>>
>>>> On 11 October 2013 10:03, IOhannes m zm?lnig <zmoelnig at iem.at> wrote:
>>>>
>>>>> On 2013-10-11 09:23, Julian Brooks wrote:
>>>>>> checking for jack_set_xrun_callback in -ljack... no
>>>>>> checking for jack_set_error_function in -ljack... no
>>>>> you have to install libjack-dev.
>>>>>
>>>>> a good start to install all/most packages needed to build jack (at least
>>>>> with the same features as the "puredata" packages) is:
>>>>>
>>>>> # aptitude build-dep puredata
>>>>>
>>>>> fmgaer
>>>>> IOhannes
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Pd-list at iem.at mailing list
>>>>> UNSUBSCRIBE and account-management ->
>>>>> http://lists.puredata.info/listinfo/pd-list
>>>>>
>>>>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20131014/ea509560/attachment-0001.htm>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 14 Oct 2013 06:29:28 +0100
> From: Julian Brooks <jbeezez at gmail.com>
> Subject: Re: [PD] build pd with jack in raspbian on rpi?
> To: IOhannes m zm?lnig <zmoelnig at iem.at>
> Cc: PD List <pd-list at iem.at>
> Message-ID:
> 	<CAGemBFS_trLLCpiWggfrMpcoDsPoJ_6McB-TWBE1SWkB3TSkHA at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Rebooted and typing:
> pd
> works just fine (whoo!)
>
> Apologies for the noise about the previous error message.
>
> Would still like to know about jackd1/2 though?
>
>
> On 14 October 2013 06:13, Julian Brooks <jbeezez at gmail.com> wrote:
>
>> Sorry - to be clear, I did:
>>
>> cd ~/pure-data (after d/l from git)
>> ./autogen.sh
>> ./configure --enable-jack
>> make && sudo make install
>>
>>
>> On 14 October 2013 06:08, Julian Brooks <jbeezez at gmail.com> wrote:
>>
>>> Pd seems to have built though I'm not sure if there would be some kind of
>>> 'that's it, your done, nothing to see here, move on' type message.
>>>
>>> Anyway, when typing 'pd' on the command line I get this:
>>> pd: error while loading shared libraries: libportaudio.so.2: cannot open
>>> shared object file: No such file or directory
>>>
>>> Any ideas anyone?
>>>
>>>
>>>
>>> On 14 October 2013 05:22, Julian Brooks <jbeezez at gmail.com> wrote:
>>>
>>>> Hey again,
>>>>
>>>> Possible issue:
>>>>
>>>> I've installed libjack-dev and Pd builds fine - great.
>>>>
>>>> I did want to have jackd2 but that doesn't have libjack-dev it has
>>>> libjack-jackd2-0.
>>>>
>>>> Pd doesn't configure with jack when this lib is installed.
>>>>
>>>> Does it make a difference to build Pd with libjack-dev (in effect build
>>>> with jackd1 but run with jackd2)?  I mean I guess I'll know if it's
>>>> something obvious but could there be performance issues.
>>>>
>>>>
>>>> Regards,
>>>>
>>>> Julian
>>>>
>>>>
>>>> On 11 October 2013 10:15, Julian Brooks <jbeezez at gmail.com> wrote:
>>>>
>>>>> Great stuff, nice one IOhannes.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 11 October 2013 10:03, IOhannes m zm?lnig <zmoelnig at iem.at> wrote:
>>>>>
>>>>>> On 2013-10-11 09:23, Julian Brooks wrote:
>>>>>>> checking for jack_set_xrun_callback in -ljack... no
>>>>>>> checking for jack_set_error_function in -ljack... no
>>>>>> you have to install libjack-dev.
>>>>>>
>>>>>> a good start to install all/most packages needed to build jack (at
>>>>>> least
>>>>>> with the same features as the "puredata" packages) is:
>>>>>>
>>>>>> # aptitude build-dep puredata
>>>>>>
>>>>>> fmgaer
>>>>>> IOhannes
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Pd-list at iem.at mailing list
>>>>>> UNSUBSCRIBE and account-management ->
>>>>>> http://lists.puredata.info/listinfo/pd-list
>>>>>>
>>>>>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20131014/19c2651b/attachment.htm>
>
> ------------------------------
>
> _______________________________________________
> Pd-list mailing list
> Pd-list at iem.at
> to manage your subscription (including un-subscription) see
> http://lists.puredata.info/listinfo/pd-list
>
>
> End of Pd-list Digest, Vol 103, Issue 64
> ****************************************