[PD] ALSA MIDI problem

[Jack]

Ok, I find a solution :

$ aconnect -i
client 0: 'System' [type=noyau]
    0 'Timer           '
    1 'Announce        '
client 14: 'Midi Through' [type=noyau]
    0 'Midi Through Port-0'
client 20: 'USB Uno MIDI Interface' [type=noyau]
    0 'USB Uno MIDI Interface MIDI 1'
client 128: 'Pure Data' [type=utilisateur]
    1 'Pure Data Midi-Out 1'

$ aconnect -o
client 14: 'Midi Through' [type=noyau]
    0 'Midi Through Port-0'
client 20: 'USB Uno MIDI Interface' [type=noyau]
    0 'USB Uno MIDI Interface MIDI 1'
client 128: 'Pure Data' [type=utilisateur]
    0 'Pure Data Midi-In 1'

then :
$ aconnect 128:1 20:0

Now, how can i keep this configuration each time i reboot my laptop ?
++

Jack



Le 21/01/2014 12:18, Jack a écrit :
> Hello,
>
> I need your help :)
>
> I try to use my M-Audio Uno MIDI interface with Pd, but it doesn't work.
>
> I tried this three command to be sure that my MIDI interface works.
>
> $ lsusb
> ...
> Bus 001 Device 007: ID 0763:0150 Midiman M-Audio Uno
> ...
>
> $ dmesg | tail
> [  389.178324] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [  389.178328] usb 1-1.2: Product: USB Uno MIDI Interface
> [  389.178331] usb 1-1.2: Manufacturer: M-Audio
>
> $ amidi -p hw:1 -S 'F0 43 10 4C 00 00 7E 00 F7'
> and i can see the LED "MIDI out" blinking.
>
> Now with Pd, i tried :
> $ pd -nosleep -noaudio -alsamidi -midiindev 0 -midioutdev 0
> or
> $ pd -nosleep -noaudio -alsamidi -midiindev 1 -midioutdev 1
>
> but after checking the toggle "MIDI OUT" in "media -> test Audio and
> MIDI", and can't see LED blinking on my interface.
> Even after "media -> ALSA MIDI" : In Ports : 1, Out Ports : 1 -> Apply
> and OK, I get nothing.
>
> I am sure i miss something...
> Any help is welcome.
> Thanx.
> ++
>
> Jack
>
>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list