[PD] [PD-announce] Pd 0.46-2 released
Jack
jack at rybn.org
Tue Oct 28 17:22:58 CET 2014
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
OK, done.
It builds just fine now.
Thanx.
++
Jack
Le 28/10/2014 17:16, Dan Wilcox a écrit :
> That commit does a very simple thing which you can do on your own
> to get it building.
>
> Change Makefile.am line 346 from
>
> doc/5.reference/metro.pd \
>
> to
>
> doc/5.reference/metro-help.pd \
>
> Then rerun
>
> ./configure make
>
> -------- Dan Wilcox @danomatika <http://twitter.com/danomatika>
> danomatika.com <http://danomatika.com/> robotcowboy.com
> <http://robotcowboy.com/>
>
>
>> On Oct 28, 2014, at 12:12 PM, Jack <jack at rybn.org> wrote:
>>
> Le 28/10/2014 16:57, Dan Wilcox a écrit :
>>>> Err, I spoke too soon. I see a commit that fixed this exact
>>>> issue. I bet you just need to clean all the automake stuff
>>>> and rebuild the makefiles, assuming you built 0.46.1 and then
>>>> updated and didn’t regenerate the makefiles when building
>>>> 0.46.2.
>>>>
>>>> Try:
>>>>
>>>> make dist clean
>
> I download sources and untar, then :
>
> $ cd pd-0.46-2 $ make dist clean make: *** No rule to make target
> 'dist'. Stop. $ ./autogen.sh $ ./configure --enable-jack $ make
> ... make[2]: Leaving directory
> '/home/jack/Téléchargements/pd-0.46-2/extra' make[2]: Entering
> directory '/home/jack/Téléchargements/pd-0.46-2' make[2]: *** No
> rule to make target 'doc/5.reference/metro.pd', needed by 'all-am'.
> Arrêt. make[2]: Leaving directory
> '/home/jack/Téléchargements/pd-0.46-2' Makefile:751: recipe for
> target 'all-recursive' failed make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory '/home/jack/Téléchargements/pd-0.46-2'
> Makefile:660: recipe for target 'all' failed make: *** [all] Error
> 2
>
> $ make dist clean make: *** No rule to make target
> 'doc/5.reference/metro.pd', needed by 'distdir'. Stop.
>
> The problem seems to come only from the pd-0.46-2.src.tar.gz on :
> http://msp.ucsd.edu/Software/pd-0.46-2.src.tar.gz
> <http://msp.ucsd.edu/Software/pd-0.46-2.src.tar.gz> ++
>
> Jack
>
>
>>>> ./autogen ./configure make
>>>>
>>>> -------- Dan Wilcox @danomatika
>>>> <http://twitter.com/danomatika
>>>> <http://twitter.com/danomatika>> danomatika.com
>>>> <http://danomatika.com/> <http://danomatika.com/
>>>> <http://danomatika.com/>> robotcowboy.com
>>>> <http://robotcowboy.com/> <http://robotcowboy.com/
>>>> <http://robotcowboy.com/>>
>>>>
>>>>
>>>>> On Oct 28, 2014, at 11:53 AM, Dan Wilcox
>>>>> <danomatika at gmail.com <mailto:danomatika at gmail.com>>
>>>>> wrote:
>>>>>
>>>>> From reading the error, it’s obvious the Makefile.am was
>>>>> broken when “metro.pd" was renamed to "metro-help.pd”.
>>>>> Automake goes through and generates Makefiles based on the
>>>>> Makefile.am files found through out the project.
>>>>>
>>>>> You probably only need to find the Makefile.am for
>>>>> puredata/extra and change “metro.pd” to “metro-help.pd”.
>>>>>
>>>>> I think that’s a better solution then “oh, don’t bother
>>>>> with that autotools stuff, it’s always broken”. :D
>>>>>
>>>>> -------- Dan Wilcox @danomatika
>>>>> <http://twitter.com/danomatika
>>>>> <http://twitter.com/danomatika>> danomatika.com
>>>>> <http://danomatika.com/> <http://danomatika.com/
>>>>> <http://danomatika.com/>> robotcowboy.com
>>>>> <http://robotcowboy.com/> <http://robotcowboy.com/
>>>>> <http://robotcowboy.com/>>
>>>>>
>>>>>
>>>>>> On Oct 28, 2014, at 7:00 AM, pd-list-request at lists.iem.at
>>>>>> <mailto:pd-list-request at lists.iem.at>
>>>>>> <mailto:pd-list-request at lists.iem.at
>>>>>> <mailto:pd-list-request at lists.iem.at>> wrote:
>>>>>>
>>>>>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
>>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> I used to use : $ ./autogen.sh $ ./configure $ make to
>>>>>> compile Pd. But I have a problem with the pd 0.46-2 :
>>>>>>
>>>>>> make[3]: Leaving directory
>>>>>> '/home/jack/Téléchargements/pd-0.46-2/extra/stdout'
>>>>>> make[3]: Entering directory
>>>>>> '/home/jack/Téléchargements/pd-0.46-2/extra' make[3]:
>>>>>> Nothing to be done for 'all-am'. make[3]: Leaving
>>>>>> directory '/home/jack/Téléchargements/pd-0.46-2/extra'
>>>>>> make[2]: Leaving directory
>>>>>> '/home/jack/Téléchargements/pd-0.46-2/extra' make[2]:
>>>>>> Entering directory '/home/jack/Téléchargements/pd-0.46-2'
>>>>>> make[2]: *** No rule to make target
>>>>>> 'doc/5.reference/metro.pd', needed by 'all-am'. Stop.
>>>>>> make[2]: Leaving directory
>>>>>> '/home/jack/Téléchargements/pd-0.46-2' Makefile:751:
>>>>>> recipe for target 'all-recursive' failed make[1]: ***
>>>>>> [all-recursive] Error 1 make[1]: Leaving directory
>>>>>> '/home/jack/Téléchargements/pd-0.46-2' Makefile:660:
>>>>>> recipe for target 'all' failed make: *** [all] Error 2
>>>>>>
>>>>>> How can I solve this error ? Thanx. ++
>>>>>>
>>>>>> Jack
>>>>>>
>>>>>> PS : same problem on Ubuntu 14.10, and last Raspbian.
>>>>>
>>>>
>>>>
>
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAEBAgAGBQJUT8LiAAoJEOuluecjw8GUtCMH/AwzHCwemWWhL23ypNIVc5tY
bYZOGHrD4jq58iV2JzZPrKhi7/iLrDfqcL8jj4v+DLtJ2RLY0IWsaLhmvN5RnSWu
19PFV2bnN0Ye+s7Saj+llb7ECpibGOjLUyYaQPx0AuootSwtZ/CsRu5tbfAQhHRV
BqFy/LgW5VMlvwxE7faovRBGm2XjbQ3GN6k8xbcaCUmNB5bQe2AFLRh2snCHiBsz
64dXrp83Xg6F6F6oXjNgkvGL7TYO0F86jQntOrRmqJ66077egk1h9d1P/MMuAvOp
3ABf8TrSNdR65DHWcM19CA+2fnYb1W5xTD2Bwl9lBQTE+DxqyIOJJecDYEChSGQ=
=CQyY
-----END PGP SIGNATURE-----
More information about the Pd-list
mailing list