[PD] [PD-announce] Pd 0.46-2 released

[Dan Wilcox]

Sure, no problem. Sometimes there’s an easy fix and sometimes there isn’t. Luckily this was an easy one :D

Hopefully the src.tar.gz package get’s updated ...

--------
Dan Wilcox
@danomatika <http://twitter.com/danomatika>
danomatika.com <http://danomatika.com/>
robotcowboy.com <http://robotcowboy.com/>


> On Oct 28, 2014, at 12:22 PM, Jack <jack at rybn.org> wrote:
> 
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> OK, done.
> It builds just fine now.
> Thanx.
> ++
> 
> Jack
> 
> 
> 
> Le 28/10/2014 17:16, Dan Wilcox a écrit :
>> That commit does a very simple thing which you can do on your own
>> to get it building.
>> 
>> Change Makefile.am line 346 from
>> 
>> doc/5.reference/metro.pd \
>> 
>> to
>> 
>> doc/5.reference/metro-help.pd \
>> 
>> Then rerun
>> 
>> ./configure make
>> 
>> -------- Dan Wilcox @danomatika <http://twitter.com/danomatika> 
>> danomatika.com <http://danomatika.com/> robotcowboy.com
>> <http://robotcowboy.com/>
>> 
>> 
>>> On Oct 28, 2014, at 12:12 PM, Jack <jack at rybn.org> wrote:
>>> 
>> Le 28/10/2014 16:57, Dan Wilcox a écrit :
>>>>> Err, I spoke too soon. I see a commit that fixed this exact
>>>>> issue. I bet you just need to clean all the automake stuff
>>>>> and rebuild the makefiles, assuming you built 0.46.1 and then
>>>>> updated and didn’t regenerate the makefiles when building
>>>>> 0.46.2.
>>>>> 
>>>>> Try:
>>>>> 
>>>>> make dist clean
>> 
>> I download sources and untar, then :
>> 
>> $ cd pd-0.46-2 $ make dist clean make: *** No rule to make target
>> 'dist'.  Stop. $ ./autogen.sh $ ./configure --enable-jack $ make 
>> ... make[2]: Leaving directory
>> '/home/jack/Téléchargements/pd-0.46-2/extra' make[2]: Entering
>> directory '/home/jack/Téléchargements/pd-0.46-2' make[2]: *** No
>> rule to make target 'doc/5.reference/metro.pd', needed by 'all-am'.
>> Arrêt. make[2]: Leaving directory
>> '/home/jack/Téléchargements/pd-0.46-2' Makefile:751: recipe for
>> target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 
>> make[1]: Leaving directory '/home/jack/Téléchargements/pd-0.46-2' 
>> Makefile:660: recipe for target 'all' failed make: *** [all] Error
>> 2
>> 
>> $ make dist clean make: *** No rule to make target
>> 'doc/5.reference/metro.pd', needed by 'distdir'. Stop.
>> 
>> The problem seems to come only from the pd-0.46-2.src.tar.gz on : 
>> http://msp.ucsd.edu/Software/pd-0.46-2.src.tar.gz
>> <http://msp.ucsd.edu/Software/pd-0.46-2.src.tar.gz> ++
>> 
>> Jack
>> 
>> 
>>>>> ./autogen ./configure make
>>>>> 
>>>>> -------- Dan Wilcox @danomatika
>>>>> <http://twitter.com/danomatika
>>>>> <http://twitter.com/danomatika>> danomatika.com
>>>>> <http://danomatika.com/> <http://danomatika.com/
>>>>> <http://danomatika.com/>> robotcowboy.com
>>>>> <http://robotcowboy.com/> <http://robotcowboy.com/
>>>>> <http://robotcowboy.com/>>
>>>>> 
>>>>> 
>>>>>> On Oct 28, 2014, at 11:53 AM, Dan Wilcox
>>>>>> <danomatika at gmail.com <mailto:danomatika at gmail.com>> 
>>>>>> wrote:
>>>>>> 
>>>>>> From reading the error, it’s obvious the Makefile.am was
>>>>>> broken when “metro.pd" was renamed to "metro-help.pd”.
>>>>>> Automake goes through and generates Makefiles based on the
>>>>>> Makefile.am files found through out the project.
>>>>>> 
>>>>>> You probably only need to find the Makefile.am for
>>>>>> puredata/extra and change “metro.pd” to “metro-help.pd”.
>>>>>> 
>>>>>> I think that’s a better solution then “oh, don’t bother
>>>>>> with that autotools stuff, it’s always broken”. :D
>>>>>> 
>>>>>> -------- Dan Wilcox @danomatika
>>>>>> <http://twitter.com/danomatika
>>>>>> <http://twitter.com/danomatika>> danomatika.com
>>>>>> <http://danomatika.com/> <http://danomatika.com/
>>>>>> <http://danomatika.com/>> robotcowboy.com
>>>>>> <http://robotcowboy.com/> <http://robotcowboy.com/
>>>>>> <http://robotcowboy.com/>>
>>>>>> 
>>>>>> 
>>>>>>> On Oct 28, 2014, at 7:00 AM, pd-list-request at lists.iem.at
>>>>>>> <mailto:pd-list-request at lists.iem.at> 
>>>>>>> <mailto:pd-list-request at lists.iem.at
>>>>>>> <mailto:pd-list-request at lists.iem.at>> wrote:
>>>>>>> 
>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
>>>>>>> 
>>>>>>> Hello,
>>>>>>> 
>>>>>>> I used to use : $ ./autogen.sh $ ./configure $ make to
>>>>>>> compile Pd. But I have a problem with the pd 0.46-2 :
>>>>>>> 
>>>>>>> make[3]: Leaving directory 
>>>>>>> '/home/jack/Téléchargements/pd-0.46-2/extra/stdout'
>>>>>>> make[3]: Entering directory 
>>>>>>> '/home/jack/Téléchargements/pd-0.46-2/extra' make[3]:
>>>>>>> Nothing to be done for 'all-am'. make[3]: Leaving
>>>>>>> directory '/home/jack/Téléchargements/pd-0.46-2/extra'
>>>>>>> make[2]: Leaving directory
>>>>>>> '/home/jack/Téléchargements/pd-0.46-2/extra' make[2]: 
>>>>>>> Entering directory '/home/jack/Téléchargements/pd-0.46-2'
>>>>>>> make[2]: *** No rule to make target
>>>>>>> 'doc/5.reference/metro.pd', needed by 'all-am'.  Stop.
>>>>>>> make[2]: Leaving directory 
>>>>>>> '/home/jack/Téléchargements/pd-0.46-2' Makefile:751:
>>>>>>> recipe for target 'all-recursive' failed make[1]: ***
>>>>>>> [all-recursive] Error 1 make[1]: Leaving directory 
>>>>>>> '/home/jack/Téléchargements/pd-0.46-2' Makefile:660:
>>>>>>> recipe for target 'all' failed make: *** [all] Error 2
>>>>>>> 
>>>>>>> How can I solve this error ? Thanx. ++
>>>>>>> 
>>>>>>> Jack
>>>>>>> 
>>>>>>> PS : same problem on Ubuntu 14.10, and last Raspbian.
>>>>>> 
>>>>> 
>>>>> 
>> 
>> 
>> 
> 
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1
> 
> iQEcBAEBAgAGBQJUT8LiAAoJEOuluecjw8GUtCMH/AwzHCwemWWhL23ypNIVc5tY
> bYZOGHrD4jq58iV2JzZPrKhi7/iLrDfqcL8jj4v+DLtJ2RLY0IWsaLhmvN5RnSWu
> 19PFV2bnN0Ye+s7Saj+llb7ECpibGOjLUyYaQPx0AuootSwtZ/CsRu5tbfAQhHRV
> BqFy/LgW5VMlvwxE7faovRBGm2XjbQ3GN6k8xbcaCUmNB5bQe2AFLRh2snCHiBsz
> 64dXrp83Xg6F6F6oXjNgkvGL7TYO0F86jQntOrRmqJ66077egk1h9d1P/MMuAvOp
> 3ABf8TrSNdR65DHWcM19CA+2fnYb1W5xTD2Bwl9lBQTE+DxqyIOJJecDYEChSGQ=
> =CQyY
> -----END PGP SIGNATURE-----

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20141028/ac9a851f/attachment-0001.html>