[PD] pd 46.6 on raspberry pi 2
Antoine Villeret
antoine.villeret at gmail.com
Mon Jul 6 20:08:47 CEST 2015
btw your error is related to libasound
sudo apt-get install libasound-dev should resolve it
and my mistake,
you should run a 'make install' not just make (which check for dependency
and fail)
so, try :
sudo make -f makefile.gnu install
+
a
--
do it yourself
http://antoine.villeret.free.fr
2015-07-06 15:57 GMT+02:00 Cyrille Henry <ch at chnry.net>:
> hello,
>
> if you get a precompiled pd version, you just have to copy content of
> pd/bin/* to /usr/local/bin/ and pd/tcl to /usr/local/tcl.
>
> or just start pd in a terminal using it's full path : /home/pi/pd/bin/pd
>
> cheers
>
> Le 06/07/2015 15:41, Rick Snow a écrit :
>
>> Thank you Antoine for the suggestion:
>>
>> When I tried:
>> cd pd-046.-6/src
>> sudo make -f makefile.gnu
>>
>> terminal returned:
>> make: ***No rule to make target '/usr/include/alsa/asoundlib.h', needed
>> by 's_audio_alsa.o'. Stop.
>>
>> best,
>> Rick
>>
>>
>> > ------------------------------
>> >
>> > Message: 4
>> > Date: Sun, 5 Jul 2015 23:12:18 +0200
>> > From: Antoine Villeret <antoine.villeret at gmail.com <mailto:
>> antoine.villeret at gmail.com>>
>> > To: Jack <jack at rybn.org <mailto:jack at rybn.org>>
>> > Cc: "pd-list at lists.iem.at <mailto:pd-list at lists.iem.at>" <
>> pd-list at lists.iem.at <mailto:pd-list at lists.iem.at>>
>> > Subject: Re: [PD] pd 46.6 on raspberry pi 2?
>> > Message-ID:
>> > <CAGn5wNcW7Nom7sfSO-ykmu5SsV2YjmPF98tu7=
>> Kb7w3kKpm2Ng at mail.gmail.com <mailto:Kb7w3kKpm2Ng at mail.gmail.com>>
>> > Content-Type: text/plain; charset="utf-8"
>> >
>> > hi
>> >
>> > Miller's zip already contains binary for RPI
>> > so you don't need to build it yourself.
>> > just install it with something like :
>> >
>> > cd pd/src
>> > sudo make -f makefile.gnu
>> >
>> > cheers
>> > a
>> >
>> > --
>> > do it yourself
>> > http://antoine.villeret.free.fr
>> >
>> > 2015-07-05 23:00 GMT+02:00 Jack <jack at rybn.org <mailto:
>> jack at rybn.org>>:
>> >
>> >> -----BEGIN PGP SIGNED MESSAGE-----
>> >> Hash: SHA1
>> >>
>> >> Hello Rick,
>> >>
>> >> you can try before (if under debian based linux) :
>> >> $ sudo apt-get install autoconf
>> >> ++
>> >>
>> >> Jack
>> >>
>> >>
>> >>
>> >> Le 05/07/2015 22:54, Rick Snow a écrit :
>> >> > Hi list,
>> >> >
>> >> > I've been trying to set up a Raspberry Pi 2 for a few days and
>> am
>> >> > running into some problems.
>> >> >
>> >> > I was able to install Pd 43.3 without difficulty.
>> >> >
>> >> > But when I tried to install Pd 46.6 for the Raspberry Pi from
>> >> > Miller's site: http://msp.ucsd.edu/software.html
>> >> >
>> >> > using the following directions:
>> >> >
>> >> > "run the following commands: ./autogen.sh ./configure make"
>> >> >
>> >> >
>> >> > When I run: ./autogen.sh
>> >> >
>> >> > terminal returns: ./autogen.sh: 22 ./autogen.sh: autoreconf: not
>> >> > found
>> >> >
>> >> > I have successfully run: sudo apt-get update and sudo apt-get
>> >> > install build-essential
>> >> >
>> >> > Any advice would be greatly appreciated!
>> >> >
>> >> > best, Rick
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > Pd-list at lists.iem.at <mailto:Pd-list at lists.iem.at> mailing
>> list UNSUBSCRIBE and
>> >> > account-management ->
>> http://lists.puredata.info/listinfo/pd-list
>> >> >
>> >>
>> >> -----BEGIN PGP SIGNATURE-----
>> >> Version: GnuPG v1
>> >>
>> >> iQEcBAEBAgAGBQJVmZrpAAoJEOuluecjw8GU8uwIAJC/0kp3FyVJ8R3eIAo9b7GE
>> >> 5hsJhNH0N2IJ1Alu1IIFZJZUTK8BbZbafodxXXRqXRlOZEQJlKDEcHeqH1Gk5zOo
>> >> /3p316q4cArrY0TTl9c9jmUoWqnC9OPqx3YurQ5BuEZKc1e88Gbik5x9GGYa7bQ5
>> >> pRv/eWQ4kfwrUJ3Jwb9i1pWacgOmdlXL3SlyvZhPMTLbBBgujse3znwHEB+Pby7n
>> >> Lny+htQ6EdP7pBPZMNnIdeopJUqadEwWT6Y6V5743zRBEp8zHr8/5JNfzkjdcb4b
>> >> HSSKUWfoCOFQFh2VdrFQKjUsNMeD51KDx7d/8JxolGSZGVd3mW0Ts0viP9iUdbs=
>> >> =9rdp
>> >> -----END PGP SIGNATURE-----
>> >>
>> >> _______________________________________________
>> >> Pd-list at lists.iem.at <mailto:Pd-list at lists.iem.at> mailing list
>> >> UNSUBSCRIBE and account-management ->
>> >> http://lists.puredata.info/listinfo/pd-list
>> >>
>> > -------------- next part --------------
>> > An HTML attachment was scrubbed...
>> > URL:
>> > <
>> http://lists.puredata.info/pipermail/pd-list/attachments/20150705/4419b213/attachment-0001.html
>> >
>> >
>> > ------------------------------
>>
>>
>>
>> _______________________________________________
>> Pd-list at lists.iem.at mailing list
>> UNSUBSCRIBE and account-management ->
>> http://lists.puredata.info/listinfo/pd-list
>>
>>
> _______________________________________________
> Pd-list at lists.iem.at mailing list
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20150706/6a6a73e6/attachment.html>
More information about the Pd-list
mailing list