[PD] compiling for Raspberry Pi 2 (was 2nd Pi 2 issue)

[Antoine Villeret]

hum, strange,

I was pretty sure that pd loads l_arm on RPi,

btw, did you try to rename the .l_arm in .pd_linux ?

+
a

--
do it yourself
http://antoine.villeret.free.fr

2015-07-05 23:53 GMT+02:00 Rick Snow <ricksnow at gmail.com>:

> Thanks Antoine.
>
> The pi2 does not seem to be looking for .l_arm
>  When I try to load the object with verbose checked I get:
> tried /home/pi/pd-externals/wiringPi_gpio.l_i386 and failed
> tried /home/pi/pd-externals/wiringPi_gpio.l_i386 and failed
> tried /home/pi/pd-externals/wiringPi_gpio.l_i386 and failed
> tried /usr/local/lib/pd-externals/wiringPi_gpio.l_i386 and failed
> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.l_i386 and failed
> tried /usr/lib/pd/extra/wiringPi_gpio.l_i386 and failed
> tried /home/pi/pd-externals/wiringPi_gpio.pd_linux and failed
> tried /home/pi/pd-externals/wiringPi_gpio.pd_linux and failed
> tried /home/pi/pd-externals/wiringPi_gpio.pd_linux and failed
> tried /usr/local/lib/pd-externals/wiringPi_gpio.pd_linux and failed
> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.pd_linux and failed
> tried /usr/lib/pd/extra/wiringPi_gpio.pd_linux and failed
> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed
> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed
> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed
> tried /usr/local/lib/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and
> failed
> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio/wiringPi_gpio.l_i386
> and failed
> tried /usr/lib/pd/extra/wiringPi_gpio/wiringPi_gpio.l_i386 and failed
> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and failed
> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and failed
> tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and failed
> tried /usr/local/lib/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux
> and failed
> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio/wiringPi_gpio.pd_linux
> and failed
> tried /usr/lib/pd/extra/wiringPi_gpio/wiringPi_gpio.pd_linux and failed
> tried /home/pi/pd-externals/wiringPi_gpio.pd and failed
> tried /home/pi/pd-externals/wiringPi_gpio.pd and failed
> tried /home/pi/pd-externals/wiringPi_gpio.pd and failed
> tried /usr/local/lib/pd-externals/wiringPi_gpio.pd and failed
> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.pd and failed
> tried /usr/lib/pd/extra/wiringPi_gpio.pd and failed
> tried /home/pi/pd-externals/wiringPi_gpio.pat and failed
> tried /home/pi/pd-externals/wiringPi_gpio.pat and failed
> tried /home/pi/pd-externals/wiringPi_gpio.pat and failed
> tried /usr/local/lib/pd-externals/wiringPi_gpio.pat and failed
> tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.pat and failed
> tried /usr/lib/pd/extra/wiringPi_gpio.pat and failed
>  wiringPi_gpio
>
>
> On 7/5/15, Antoine Villeret <antoine.villeret at gmail.com> wrote:
> > 2015-07-05 23:00 GMT+02:00 Rick Snow <ricksnow at gmail.com>:
> >
> >> Dear list,
> >>
> >> In addition to having trouble getting pd 46.6 to install on the
> Raspberry
> >> Pi 2 I am having trouble compiling the NYU wiringPi objects.
> >>
> >> Does anyone know which architecture the Pi 2 requires?  l_arm or
> >> .pd_linux?t
> >>
> > both are good candidates
> > but pd_linux could be of arch i686, x86_64 or arm (or even something
> else)
> >
> >>
> >> I am able to compile the objects using the provided makefile as an l_arm
> >> object but when I try to create a .pd_linux object with the makefile
> >> terminal returns:
> >> "* No rule to make target 'wiringPi_gpio.pd_linux'. Stop."
> >>
> >
> > run pd with -verbose option and look at pd's console to know what it is
> > trying to load when you make a [wiringPi_gpio] object
> > it should try to load .l_arm
> > +
> > a
> >
> >>
> >> same goes for the wiringPi_mcp3008.pd_linux object.
> >>
> >> Any advice greatly appreciated!
> >> Rick
> >>
> >> _______________________________________________
> >> Pd-list at lists.iem.at mailing list
> >> UNSUBSCRIBE and account-management ->
> >> http://lists.puredata.info/listinfo/pd-list
> >>
> >>
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20150706/3d96f1d3/attachment-0001.html>