[PD] pd 46.6 on raspberry pi 2

[Rick Snow]

​Thank you Cyrille.

This worked!  I'm new to Pd on linux... much to learn!

I'll still try to compile but it is good to know where to find the
application and that it runs right away after download.

cheers,
Rick




>
> Message: 5
> Date: Mon, 06 Jul 2015 15:57:18 +0200
> From: Cyrille Henry <ch at chnry.net>
> To: pd-list at lists.iem.at
> Subject: Re: [PD] pd 46.6 on raspberry pi 2
> Message-ID: <559A893E.5050806 at chnry.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> hello,
>
> if you get a precompiled pd version, you just have to copy content of
> pd/bin/* to /usr/local/bin/ and pd/tcl to /usr/local/tcl.
>
> or just start pd in a terminal using it's full path : /home/pi/pd/bin/pd
>
> cheers
>
> Le 06/07/2015 15:41, Rick Snow a écrit :
> > ​Thank you Antoine for the suggestion:
> >
> > When I tried:
> > cd pd-046.-6/src
> > sudo make -f makefile.gnu
> >
> > terminal returned:
> > make: ***No rule to make target '/usr/include/alsa/asoundlib.h', needed
> by 's_audio_alsa.o'. Stop.
> >
> > best,
> > Rick
> > ​
> >
> >      > ------------------------------
> >      >
> >      > Message: 4
> >      > Date: Sun, 5 Jul 2015 23:12:18 +0200
> >      > From: Antoine Villeret <antoine.villeret at gmail.com <mailto:
> antoine.villeret at gmail.com>>
> >      > To: Jack <jack at rybn.org <mailto:jack at rybn.org>>
> >      > Cc: "pd-list at lists.iem.at <mailto:pd-list at lists.iem.at>" <
> pd-list at lists.iem.at <mailto:pd-list at lists.iem.at>>
> >      > Subject: Re: [PD] pd 46.6 on raspberry pi 2?
> >      > Message-ID:
> >      >       <CAGn5wNcW7Nom7sfSO-ykmu5SsV2YjmPF98tu7=
> Kb7w3kKpm2Ng at mail.gmail.com <mailto:Kb7w3kKpm2Ng at mail.gmail.com>>
> >      > Content-Type: text/plain; charset="utf-8"
> >      >
> >      > hi
> >      >
> >      > Miller's zip already contains binary for RPI
> >      > so you don't need to build it yourself.
> >      > just install it with something like :
> >      >
> >      > cd pd/src
> >      > sudo make -f makefile.gnu
> >      >
> >      > cheers
> >      > a
> >      >
> >      > --
> >      > do it yourself
> >      > http://antoine.villeret.free.fr
> >      >
> >      > 2015-07-05 23:00 GMT+02:00 Jack <jack at rybn.org <mailto:
> jack at rybn.org>>:
> >      >
> >      >> -----BEGIN PGP SIGNED MESSAGE-----
> >      >> Hash: SHA1
> >      >>
> >      >> Hello Rick,
> >      >>
> >      >> you can try before (if under debian based linux) :
> >      >> $ sudo apt-get install autoconf
> >      >> ++
> >      >>
> >      >> Jack
> >      >>
> >      >>
> >      >>
> >      >> Le 05/07/2015 22:54, Rick Snow a écrit :
> >      >> > Hi list,
> >      >> >
> >      >> > I've been trying to set up a Raspberry Pi 2 for a few days and
> am
> >      >> > running into some problems.
> >      >> >
> >      >> > I was able to install Pd 43.3 without difficulty.
> >      >> >
> >      >> > But when I tried to install Pd 46.6 for the Raspberry Pi from
> >      >> > Miller's site: http://msp.ucsd.edu/software.html
> >      >> >
> >      >> > using the following directions:
> >      >> >
> >      >> > "run the following commands: ./autogen.sh ./configure make"
> >      >> >
> >      >> >
> >      >> > When I run: ./autogen.sh
> >      >> >
> >      >> > terminal returns: ./autogen.sh: 22 ./autogen.sh: autoreconf:
> not
> >      >> > found
> >      >> >
> >      >> > I have successfully run: sudo apt-get update and sudo apt-get
> >      >> > install build-essential
> >      >> >
> >      >> > Any advice would be greatly appreciated!
> >      >> >
> >      >> > best, Rick
> >      >> >
> >      >> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20150706/1a6336e0/attachment.html>