[PD] How's Pd limited?

Matt Barber brbrofsvl at gmail.com
Mon Feb 22 21:25:32 CET 2016

I've said this before, but I think there are very good reasons not to ever
include segmented patch cords (although hideable patch cords would be even
worse). These two features are responsible for some of the very worst
patching habits in Max/MSP. Have you ever been called on to run someone's
patch, and you need to tweak something for your specific audio setup or fix
a bug or whatever, and when you open it you get something that looks like
this (one of the first "max patch" results on google image search):


If you can't bend the cords there's much less of a temptation to make these
kinds of can-of-worms patches, and more of an incentive to use send/receive
when you need to get a value into an inconvenient place. There's also an
incentive to make things more modular, which is usually far easier to debug
than a huge sprawling patch. So while I can see where they'd be very useful
if used judiciously, as someone who often has to operate someone else's
patches, I'm very hesitant.

On Mon, Feb 22, 2016 at 3:05 PM, Jonathan Wilkes via Pd-list <
pd-list at lists.iem.at> wrote:

> Hi Eugene,
> Great post!
> I help develop pd-l2ork, and it addresses some of the points below.  I
> recently got it building on OSX with most of the pd-extended libraries.
> I'll reply to each point below...
> > On Monday, February 22, 2016 4:21 AM, Eugene Lazarchik <
> evgenius.lazarchik at gmail.com> wrote:
> > Where do I start?
> > * Dynamic patching is officially not supported and bug/feature requests
> get ignored. I had to jump through a lot of hoops to use dynamic patching
> with GOP but I discovered a bunch of weird issues with subpatches not
> getting redrawn and connectors left hanging after object deletion. Had to
> build ugly hacks/workarounds since nobody's gonna fix the issues in PD.
> Sending loadbangs to dynamically created objects is a pain, as well as
> trying to dynamically connect them to something (most examples of using the
> "connect" message use hardcoded object ID's).
> GOP with dynamic patching is certainly tricky-- I find it way too
> complicated to be generally useful.  However, Pd-l2ork should work without
> bugs with
> GOPs.  Things get fixed there, and bug reports don't sit around for ten
> years.
> As far as connect messages-- I have exposed the canvas "find" method
> inside an object called [canvasinfo] in pd-l2ork.  It would be possible to
> write
> a set of abstractions to faciliate connections using object/abstraction
> names instead of indices.  But like GOP, dynamic patching is at its core
> pretty
> clunky so it would still be difficult to dynamically patch things
> (especially doing it live).
> > * Support for lists is quite limited. Wanna create a multidimentional
> array? Build your own. Want a hash map? Build your own. Luckily there's
> list-abs but it's weird that such basic functionality (that's present in
> most programming languages) is not a core language feature.
> Data structures have support for multi-dimensional arrays.  In Pd-l2ork
> you can create a scalar in an object box which makes it slightly easier to
> use them.  But it's definitely more complex than using list-abs or the
> newer array objects for single-dimensional arrays.
> > * Sends and receives are global which creates a potential for conflicts.
> $0 can be used to avoid that but it looks ugly and many libraries, patches,
> and I think even help files, don't use it.
> I agree that $0 is ugly.  I've got some locality using data structures
> with a "canvas" field in upcoming Pd-l2ork release, but it's still very
> experimental.
> Pd-l2ork has [preset_hub] and [preset_node] which handle locality without
> $0.  It works quite well, but it would be an _enormous_ undertaking to
> use that-- or any other design-- as a general replacement for wireless
> > * Help files are *.pd which sounds neat at first, until you realize that
> they're not easily searchable and can't be viewed online.
> They are searchable in Pd-l2ork, as well as the last version of
> Pd-extended (I think).  In the upcoming version of Pd-l2ork the help
> browser indexes the
> doc folder in less than a second.  I'm just indexing the keywords in [pd
> META]-- it could index full text too but that turns out not to improve the
> results
> very much.  But it's possible to do serious tweaks, save/load/ship an
> index, etc. if someone wants to take it on.
> > * Bugs and weird behavior when handling special characters. There's no
> consistent way of escaping them. Sometimes characters disappear when saving
> and loading a patch.
> I gutted all the tcl commands from the GUI calls for Pd-l2ork, so
> theoretically it should be way easier to handle special characters now.
> But I have to
> admit I'm using some low value ASCII code to delimit messages to the GUI.
> It's just way easier to split on a single byte as opposed to, say, the
> semicolons that aren't preceded by a slash.
> Still, there is a lot of work to make sure special characters and spaces
> get saved correctly within Pd.  It needs a lot of testing by a developer
> who
> knows all the ins and outs of how to read/write/revise a parser, plus
> knowing exactly how those changes will affect past and future Pd patches
> (both
> in terms of the running instance and saving/loading patches).
> > * Limited support for comments. Special characters are not allowed
> (really? these are comments!). Automatic line wrapping doesn't work well
> since after saving/loading a patch often changes how text is broken into
> lines. So I have to put each line as a separate comment.
> I think Ivica added support for saving newlines inside comments (as above,
> it uses a hack to deal with special characters).  But they still get
> parsed--
> that's bad, although Pd isn't the only language that does that.
> > * Dependence on font sizes. By default object boxes scale automatically
> depending on the text inside. When you add more text, all inlets/outlets
> move. I installed a different version of PD and font size is slightly
> different and all objects are of a different size now.
> This is a hard problem. The only solution I know of is to draw an extra
> border in editmode showing the maximum width and height for the object
> at the given canvas font size.
> My hypothesis is that any spec you come up with for fixing this will cause
> more problems than it solves.  And I see complaints like the one you've
> raised here in other GUI toolkits/APIs like Qt and HTML5, with no obvious
> solutions.
> > * Want to add an outlet to the beginning of a trigger object? Enjoy
> disconnecting and connecting all other outlets since there's no way of
> automatically move them.
> Yeah, that's bad.  But at least in Pd-l2ork you can a) auto-connect one
> object to many, b) auto-connect many to one, and c) auto-connect many
> to many.
> > * Want to print all messages flowing through a connection for debugging
> purposes?
> Use the cord inspector, aka magic glass, available in the last version of
> Pd-extended as well as Pd-l2ork.
> > * Vanilla provides only minimal functionality while most of the
> convenient objects are supposed to come from external libraries. There's
> multiple issues with that. First one is that libraries are less
> standardized and consistent. They have different approaches, sometimes
> duplicate each other, use different conventions for naming, inlets/outlets,
> etc. Second issue is that libraries often become dead/unmaintained.
> That's true, though it isn't a technical problem.
> > * Big patches/abstractions become unreadable really fast. Connectors are
> always straight lines and there's no support for dummy intermediate
> "points" for connecting stuff. I use [t a] and [+~] for these purposes but
> it'd be nice to have native support for this.
> I know a lot of people want segmented patch cords.  I'm pretty happy with
> Pd-l2ork's bezier cords myself, but if someone has enough interest to
> implement and test Max-style segmented cords I wouldn't dig my heels in
> against them.
> > * Standard GUI objects are ugly and have limited functionality.
> Yes.  Just curious-- what's the most critical functionality you feel is
> missing?
> > * There's no good support for the concept of functions/procedures. Let's
> say we need to take some input, do some transformations and produce output,
> and we need to do that in multiple places in our patch. We can copy the
> objects but that will make the patch use more memory and there will be no
> code reuse. Another way is to make that an abstraction, but it's silly to
> make abstractions for every little thing that we need in 2 places. Also,
> instantiating 2 abstractions still uses more memory. We can try reusing the
> same code but we'll have to make multiple output connections so we'll need
> proper routing in order to figure out where to send the result. I made an
> abstraction to simplify that but this should be a standard feature of PD.
> What are the practical limitations of the higher memory use in these
> cases?  You're still going to have the same message passing overhead.
> > * *.pd format is not very friendly to Git. Try viewing diffs and
> resolving merge conflicts. Moving a subpatch on the screen causes different
> coordinates to be saved in the file, often resulting in conflicts. Cutting
> and pasting renumbers all objects and connections. This makes using
> branches and working on the same files impractical.
> Also true, but isn't the same for all dataflow/flow-based languages?
> > * PD seems to be maintained by only a handful of people and new
> features/bug fixes are rarely released. I used to code in C and was
> thinking of contributing but I found no good guide for new contributors. I
> wasn't even able to compile PD on my Mac (there's multiple build scripts in
> the sources but none of them work). I'm also not sure what the testing
> process should be (to make sure I'm not breaking any existing functionality
> or support for operating systems or devices).
> This is a problem of mentoring, or lack of it.  All I can say is that
> Ivica fixed all the bugs I threw at him wrt Pd-l2ork, and now I try to do
> the same with
> the work I do on Pd-l2ork.
> > * PD community uses mailing lists for communications, haha. In order to
> find useful information I have to view one message per page, with tons of
> distracting quotes from previous messages.
> What's the alternative?  Also, note that there is a Pure Data forum for
> general discussions, too.
> > These are just the first things that came to my mind...
> They are certainly helpful, and I'd encourage you to keep them coming.  I
> can't speak for the rest of the community, but feedback like this
> is worth its weight in gold.  And at least on Pd-l2ork, it _can_ affect
> the future path the software takes.
> -Jonathan
> On Sun, Feb 21, 2016 at 6:30 PM, Niklas Reppel <nik at parkellipsen.de>
> wrote:
> Hmm, i always thought that the dynamic creation and destruction of sound
> sources (oscillators etc.) pretty inconvenient in PD,
> compared to a source-code based approach.
> Maybe i missed some developments here, but the last time i checked (a year
> ago maybe), this was clearly quite
> a hassle, even though i know it's possible.
> On Mon, Feb 22, 2016 at 03:49:43AM +0200, Matti Viljamaa wrote:
> > Perhaps a bit of broad question, but I find it interesting in order to
> speculate about future additions.
> >
> > How do you think Pure Data is limited?
> > _______________________________________________
> > Pd-list at lists.iem.at mailing list
> > UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
> _______________________________________________
> Pd-list at lists.iem.at mailing list
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
> _______________________________________________
> Pd-list at lists.iem.at mailing list
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
> _______________________________________________
> Pd-list at lists.iem.at mailing list
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20160222/9149c5e1/attachment-0001.html>

More information about the Pd-list mailing list