[PD] time travelling with AKM320 and Pd
Miller Puckette
msp at ucsd.edu
Thu Apr 21 06:11:05 CEST 2016
So... last time I used 'alsa midi' I think It worked to start up Pd with
-alsamidi, then use aconnect to make Pd's input listen to whatever source
aconnect will allow it to be connected to.
But that was years ago... I'm happy to say I don't have to use MIDI very
frequently.
cheers
Miller
On Thu, Apr 21, 2016 at 04:04:19AM +0000, Jonathan Wilkes wrote:
> BTW-- On OSX I get the correct device string "AKM320", and when I set
> that device everything looks to be working correctly there. I only tested
> with the GUI port of Pd-l2ork, but I'd assume Pd Vanilla also works there.
>
> -Jonathan
>
>
> On Wednesday, April 20, 2016 11:31 PM, Jonathan Wilkes via Pd-list <pd-list at lists.iem.at> wrote:
>
>
> qjackctl has three tabs: Audio, Midi, and ALSA. The device shows up in the
> ALSA tab.
> lmms has a drop down list for midi in and midi out. It shows up on those lists,
> I can select it, and then I'm off making sounds. And that is using ALSA as the
> backend, so I know this can be done.
>
> aconnect -o sees it:client 0: 'System' [type=kernel]
> 0 'Timer '
> 1 'Announce '
> client 14: 'Midi Through' [type=kernel]
> 0 'Midi Through Port-0'
> client 20: 'AKM320' [type=kernel]
> 0 'AKM320 MIDI 1 '
>
> Neither Pd nor Pd-l2ork see it or list it with --listdev.
> I can symlink /dev/snd/midiwhatevs to /dev/midi and it will get
> found and work in pd-0.46-7 (but not in Pd-l2ork-- maybe something
> with the 0.43 changes? not sure). But that requires
> me to go buy clothes from 2005 off of ebay. I don't want to do that,
> I want *AKM320* to show up in a dropdown list in Pd.
> -Jonathan
> On Wednesday, April 20, 2016 11:14 PM, Miller Puckette <msp at ucsd.edu> wrote:
>
>
> A fun challenge....
>
> Does anything see it? (In particular, does the qjackctl MIDI patch bay see it?)
> Not that that's scientific, but that's the way I check around for whether the
> so-called ALSA MIDI driver can find it.
>
> cheers
> Miller
>
> On Thu, Apr 21, 2016 at 02:08:29AM +0000, Jonathan Wilkes via Pd-list wrote:
> > Hi list,I got a little AKM320 usb midi keyboard for $40. Hooked it up, fired up
> > Pd, and we're back to 2005:http://article.gmane.org/gmane.comp.multimedia.puredata.general/14675
> > Just change UM-1 to AKM320 and you have my error report. Well, aside
> > from the fact that my laptop doesn't have a modem on it (though I bet if it
> > did it'd show up in Pd's audio device list...)
> > Any clue what's going on here, and how to fix Pd to do the right thing _without_
> > touching any of the state on my machine (save for the Pd binary, of course)?
> >
> > Thanks,Jonathan
>
> > _______________________________________________
> > Pd-list at lists.iem.at mailing list
> > UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
>
>
>
>
> _______________________________________________
> Pd-list at lists.iem.at mailing list
> UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
>
>
>
More information about the Pd-list
mailing list