[PD] Weird issue: need to increase Pd latency in FFT patches, otherwise Pd sound output glitches and clocks are slowing down!!!

[Giulio Moro]

It sounds like a design feature. The computation of re-blocked subpatches is not spread evenly over time, but it is carried out as fast as possible whenever the "clock ticks". The CPU usage is low on average, but there are spikes (on those sample blocks when all the ffts are computed) that prevent you from meeting some of the deadlines. Changing Pd's latency provides more buffering against those spikes.
I guess [pd~] may help towards alleviating those problems: http://www.pdpatchrepo.info/hurleur/multiprocessing.pdf 
I started a discussion on the topic here https://lists.puredata.info/pipermail/pd-list/2016-09/116315.html

 
      From: Christof Ressi <christof.ressi at gmx.at>
 To: Christof Ressi <christof.ressi at gmx.at>; pd-list <pd-list at iem.at> 
 Sent: Monday, 31 October 2016, 14:19
 Subject: Re: [PD] Weird issue: need to increase Pd latency in FFT patches, otherwise Pd sound output glitches and clocks are slowing down!!!
   
OK, some updates:

obviously it doesn't have to be FFTs, in block-glitch1.pd I replaced the FFTs with square roots. But it's neither related to the number of block~ objects or subpatches. In block-glitch2.pd, I have a single blocked subpatch with lots of square roots and I get the same result. Again, the CPU load is not the problem. It seems the problem is merely related to reblocking, overlap and upsampling.  

> Gesendet: Montag, 31. Oktober 2016 um 14:38 Uhr
> Von: "Christof Ressi" <christof.ressi at gmx.at>
> An: pd-list <pd-list at iem.at>
> Betreff: [PD] Weird issue: need to increase Pd latency in FFT patches, otherwise Pd sound output glitches and clocks are slowing down!!!
>
> Hi, 
> 
> I have the following issue with Pd 0.47.1 on Win 7 (onboard soundcard + ASIO4ALL and also Focusrite Scarlett 6i6 + Focusrite ASIO Driver):
> 
> When I use more than just a few FFTs anywhere in my patch, I get a staggering sound output + clicks from Pd unless I increase the Pd latency... Apparently, it's only the playback because I couldn't hear it in a recording I made with [writesf~]. Therefore I made a recording in Reaper to show you what I'm hearing.
> 
> The more FFTs and the larger the FFT blocksize, the larger I have to set the latency. This even happens if the CPU load is as little as 5% (where 25% would be the maximum for one hardware thread on my laptop). 
> 
> In my test patch, I put a couple of FFT subpatches and a single sine wave with a volume control to check the sound output. Usually, I can play a sine wave without artifacts as long as the CPU load is not peeking. But here, the FFTs seem to magically disturb the audio output of the whole patch...
> 
> I think there's something going wrong with the scheduler because also objects like [metro] and [line] start to go slower - sometimes up to 50%!
> 
> What is going on!?
> 
> Christof_______________________________________________
> Pd-list at lists.iem.at mailing list
> UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
> 
_______________________________________________
Pd-list at lists.iem.at mailing list
UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list


   
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20161031/5c379269/attachment.html>