[PD] soundfiler alternative?

José Rafael Subía Valdez jsubiavaldez at gmail.com
Tue Feb 28 07:42:34 CET 2017


Thank you all..

but I am developing patches that are handed to performers and should work
out of the box, I can't depend on the expensive machines and RAM-DISK
settings because I can not tell my performers - you need to do all of this
and invest in your computer first before you play my music. Why? because
this is something I am doing for my PhD. Yes..saying "buy a fancy computer
with lots of RAM" is easier in Europe or the US than in other places of the
world and that is not my aim. I am trying to squeeze the best solutions on
any type of machine and to provide people that are not necessary computer
music users with the friendliest setup I can think of.

the computer I am programming this is a iMac from 2007 with 4 gb of RAM. I
have many processes including FFT, but thanks to switch~ I am able to
optimize the patch. I just have this problem that causes audio drops when
loading each sample. So not really wanna discuss finances.

Thanks again


On Mon, Feb 27, 2017 at 11:35 PM, Christof Ressi <christof.ressi at gmx.at>
wrote:

> > i keep forgetting of abominations like running a 32-bit Pd on a 64-bit
> OS.
>
> Actually, the average Windows user will have more 32-bit apps than 64-bit
> apps running on their 64-bit OS ;-).
> And most Pd users on 64-bit Windows will have a 32-bit Pd  because Miller
> doesn't offer 64-bit binaries yet and building from source is still
> impossible (at least with MinGW).
>
> > decent OSs should be able to manage more than a total 4GB of RAM even
> > when the entire OS is 32bit (a single application will not be able to
> > address more than 2^32 bytes though; but it should get you closer to
> > really having 4GB, rather than 2GB)
>
> on 32-bit Windows you usually get 2 GB per process - or 3 GB with some
> tricks*. on 64-bit Windows it's 2 GB for 32-bit processes unless you
> compile with IMAGE_FILE_LARGE_ADDRESS_AWARE set, then you get 4 GB.
>
> here are the boring details: https://msdn.microsoft.com/en-
> us/library/aa366778(VS.85).aspx?ranMID=24542&ranEAID=
> TnL5HPStwNw&ranSiteID=TnL5HPStwNw-Z6NjEgcaJn8pbbYAema89g&tduid=(
> 94e0b4bf83daa242de97c8bfb531e5d9)(256380)(2459594)(TnL5HPStwNw-
> Z6NjEgcaJn8pbbYAema89g)()
>
>
> I actually I didn't know about IMAGE_FILE_LARGE_ADDRESS_AWARE until now.
> Miller could actually use it in his 32-bit Windows builds, which currently
> only allow 2 GB**. It won't do any harm on 32-bit systems and doubles the
> available memory on 64-bit systems.
>
> > fun fact: on linux, you can use 64bit Pd for >10 years with virtually
> > all external libraries working.
>
> :-o. time to finally get my dual boot. I weren't so lazy...
>
>
> Christof
>
>
> * IMAGE_FILE_LARGE_ADDRESS_AWARE set + 4GT enabled (risky)
> ** I tested this with latest vanilla 32-bit binaries on Windows 7 64-bit
> (with 16 GB of RAM installed). I get a warning when I try to exceed 2 GB.
>
>
>
> > Gesendet: Montag, 27. Februar 2017 um 22:58 Uhr
> > Von: "IOhannes m zmölnig" <zmoelnig at iem.at>
> > An: pd-list at lists.iem.at
> > Betreff: Re: [PD] soundfiler alternative?
> >
> > On 02/27/2017 10:45 PM, Christof Ressi wrote:
> > >> well, [table] stores the samples as floating point (taking 4 bytes per
> > >> sample; and 8 byte on 64bit systems),
> > > It depends on your Pd (32-bit or 64-bit), not on the system.
> >
> > well yes, true.
> > i keep forgetting of abominations like running a 32-bit Pd on a 64-bit
> OS.
> >
> > >
> > >> however, there is a simple solution at hand: get youself plenty of RAM
> > >> and pre-load everything into tables.
> > >> 32GB cost about 250,-€ and will allow you to load approx. 24h of raw
> > >> audio, which is probably enough.
> > > Unfortunately, this is only true for 64-bit processes. A single 32-bit
> process can't handle more than 2^32 bytes (~4 GB). In reality, it's even
> less, usually 2 GB, which is a bit more than 1,5 hours of stereo audio
> @44100 Hz. Pd will give you a warning when you try to exceed this limit
> ("pd: resizebytes() failed - out of memory").
> >
> > how much RAM does that machine have?
> > decent OSs should be able to manage more than a total 4GB of RAM even
> > when the entire OS is 32bit (a single application will not be able to
> > address more than 2^32 bytes though; but it should get you closer to
> > really having 4GB, rather than 2GB)
> >
> > but yes, in order to make use of 32GB of memory you need a native 64bit
> > application (running on a 64bit OS).
> >
> > fun fact: on linux, you can use 64bit Pd for >10 years with virtually
> > all external libraries working.
> >
> > gmsr
> > IOhannes
> >
> >
> >
> > _______________________________________________
> > Pd-list at lists.iem.at mailing list
> > UNSUBSCRIBE and account-management -> https://lists.puredata.info/
> listinfo/pd-list
> >
>
> _______________________________________________
> Pd-list at lists.iem.at mailing list
> UNSUBSCRIBE and account-management -> https://lists.puredata.info/
> listinfo/pd-list
>



-- 
José Rafael Subía Valdez
www.jrsv.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20170228/52552279/attachment.html>


More information about the Pd-list mailing list